RAM Universal SMALL Tab-Tite Holder for 7" Screen Tablets including the Samsung Galaxy, Dell Streak 7 & BlackBerry PlayBook Now that you've got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. The Tab-Tite is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES: Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Included With Purchase: (1) Spring loaded back plate (2) Support cups for thin tablets with no skins (2) Support cups for thin tablets with thin or no skins (2) Support cups for thick tablets with cases Mounting hardware The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Height: 7.3" minimum to 9.62" maximum Width: Maximum width to 5.31" Depth: 1.06" maximum Cradle Dimensions: Height: 6.80" minimum to 9" maximum Width: Maximum width to 5.31" Depth: 0.125" minimum to 0.56" maximum Cradle Dimensions: Height: 5" minimum to 9.1" maximum Width: Maximum width to 4.70" Depth: 0.125" minimum to 0.44" maximum Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Diamond base adapter not included with purchase.

RAM Mount Tab-Tite™ Cradle for the Apple iPad Air 1-2 & 9.7" Tablets w/Case, Skin or Sleeve Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Features: Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet Full access to all ports Material:High Strength Composite Note:The "U" in the part number reflects product packaged in poly bag. Weight:0.65 lbs.

RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 7" minimum to 8.875" maximum Width: maximum to 4.7" Depth: maximum to 0.43" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tab-Tite Universal Clamping Cradle for 10" Screen Tablets WITH OR WITHOUT HEAVY DUTY CASES Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. The RAM Tab-Tite universal clamping cradle is compatible with the following tablets & cases: 10" Screen Tablets with or without heavy duty cases 10" Screen Tablets with OtterBox Defender cases 10" Screen Tablets with Gumdrop Drop Tech cases 10" Screen Tablets with Griffin Technology cases 10" Screen Tablets with Belkin cases Many More! The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Maximum Width = 8.12" Length Range = 8.5" to 10.5" Maximum Depth = 1.12" Features: Support cups contain open slots to accommodate for tablets of varying dimensions Spring loaded for ease of removal and insertion of your tablet Full access to all ports Customize height of holder for your tablet Best usage in low vibration environments Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Hardware included to attach to mount.

Tab-Tite™ Cradle for 8" Tablets - Samsung Galaxy Tab 4 8.0 & Tab E 8.0 The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 8.0, Tab S 8.4, Tab E 8.0 and Tab A 8.0 (2017). The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Length: 8.08" to 10.69" Width: 3.77" to 4.96" Depth: 0.13" to 0.36" Features: 1. Support cups are designed to offer access to ports and tablet functions 2. Modular design makes upgrading to a new tablet simple and cost effective 3. Dual-spring loaded tension provides secure support for your tablet 4. Easy, quick release of your tablet for on-the-go applications 5. Versatility of cradle allows for attachment to many RAM mounting solutions 6. Lifetime warranty 7. Made in U.S.A. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.5 lbs.

RAM POD I Universal Vehicle Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-316-1-TAB3 The RAM-B-316-1-TAB3 consists of a single socket arm, flex rod and Tab-Tite™ cradle. The base mounts to your seat rail without any drilling necessary. Connected to the base is a 18" rigid flexible rod that can be bent to position your device to it's optimum viewing location. The RAM POD I will hold everything you need safely and securely. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

Tab-Tite™ Cradle f/8" Samsung Galaxy Tab A & S2 8.0 w/Case The RAM® Tab-Tite&$153; spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0, Tab A 8.0 with S Pen Tab S2 8.0 with Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.25" to 11" Width: 5" to 5.88" Depth: 0.3" to 0.67" Features: Support cups are designed to offer access to ports and tablet functions Modular design makes upgrading to a new tablet simple and cost effective Dual-spring loaded tension provides secure support for your tablet Easy, quick release of your tablet for on-the-go applications Versatility of cradle allows for attachment to many RAM mounting solutions Lifetime warranty Made in U.S.A. Material: High Strength Composite Weight: 0.69 lbs.

RAM TAB-TITE Universal Clamping Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet. Compatible Devices: Apple iPad mini WITH CASE, SKIN, SLEEVE Apple iPad mini (with Retina display) WITH CASE, SKIN, SLEEVE The Tab-TiteT cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 6.80" minimum to 9" maximum Width: Maximum width to 5.68" Depth: 0.125" minimum to 1" maximum Tab-Tite Cradle Features: Support cups contain open slots to accommodate for tablets of various sizes Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Flat Surface Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-138-TAB3U The RAM-B-138-TAB3U consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern, diamond adapter base and Tab-Tite™ cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ cradle to your optimum viewing position. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

RAM Yoke Clamp Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-121-TAB3U The RAM-B-121-TAB3U consists of a double socket arm, universal diamond base, yoke clamp base and Tab-Tite™ cradle. The clamp base will accommodate rails in diameter from 0.625" to 1.25". Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ mount to your optimum viewing position. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

Tab-Tite™ Drill-Down Mount with Backing Plate for Small Tablets This mount consists of a 2.10" x 2.60" backer plate, double socket arm, round base adapter, and Tab-Tite™ universal clamping cradle. The spring-loaded Tab-Tite™ cradle makes it easy to load and unload your tablet while keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet. By allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that fits the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 7.375" - 10", Width Range: 4" - 5.31", Depth Range: .13" - 1.06" Socket to Socket Length (inch): 3” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum, high-strength composite, and steel Weight: 1.2 lb.

RAM Suction Cup Twist Lock Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-166-TAB3U The RAM-B-166-TAB3U consists of a double socket arm, 3.25" suction cup twist lock base, diamond adapter base and Tab-Tite™ cradle. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ cradle to your optimum viewing position. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

RAM Handlebar Rail Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-149Z-TAB3U The RAM-B-149Z-TAB3U consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and Tab-Tite™ cradle. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the Tab-Tite™ cradle to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

RAM Tab-Tite Holder for the Motorola XOOM Now that you've got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the RAM Tab-Tite. With interchangeable cup ends, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet Tab, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your Tab can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. The RAM Tab-Tite is compatible with the following tablets: Motorola XOOM + Case/Skin/Sleeve/Bumper (Including Otterbox Defender) Motorola XOOM without Case/Skin/Sleeve/Bumper Cradle Dimensions: Height: 8.25" minimum to 10.75" maximum Width: Maximum to 6.8" Edge Depth: Maximum to 0.50" Features: 1. Back plate can support various size support cups 2. Spring loaded tension provides secure support of XOOM 3. Spring loaded cradle allows for quick release of XOOM 4. Full access to all ports Material: High Strength Composite