Flotec FP0S1300X Tempest™ Water Removal Utility Pump 1/6 HP, 1470 GPH The Tempest™ is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.   KEY FEATURES Multipurpose pump for emergency basement and sump draining, emptying ponds, appliances, wash down and roof dewatering Draws water down to 3/16" Corrosion-resistant, continuous duty submersible pump Switch for automatic operation sold separately WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/6 MAXIMUM CAPACITY:  1470 GPH FLOW at 10' LIFT:  930 GPH DISCHARGE SIZE:  1" female (includes garden hose adapter) VOLTAGE:  115v AC, 60 Hz CORD LENGTH:  8' long / 18-3 wire / T-handle on pump connector MAXIMUM WATER TEMPERATURE:  77°F (25°C)

Flotec FP0S1775A IntelliPump™ Water Removal Utility Pump, Auto On/Off, 1/4 HP, 1790 GPH The IntelliPump | Just plug this pump in and it automatically checks for traces of water, whether you are pumping basements or draining puddles.   KEY FEATURES Innovative electronic controlled pump - Pump starts every 2-1/2 minutes to check for water. Shuts off if water is not detected Perfect for surfaces that collect water such as basements, rooftops, or any shallow flooded area Corrosion-resistant engineered resin construction WARRANTY 2 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/4 HP MAXIMUM CAPACITY:  1790 GPH FLOW at 10' LIFT:  1260 GPH DISCHARGE SIZE:  1" NPT (female) VOLTAGE:  115v AC, 60 Hz CORD LENGTH:  15' with 3-prong grounded plug MAXIMUM WATER TEMPERATURE:  77°F (25°C)

Flotec CYCLONE™ Water Removal Utility Pump The CYCLONE™ pumping system is designed for every day or emergency use. Perfect for transferring or removing unwanted water from waterbeds, aquariums, or non-draining sinks.   KEY FEATURES Multipurpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks Self-priming at 8-10 ft. vertically Corrosion-resistant, compact and portable WARRANTY 90-day limited warranty BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 1/12 MAXIMUM LIFT: 43' MAXIMUM CAPACITY: 350 GPH FLOW at 10' LIFT: 300 GPH SWITCH TYPE: Manual Operation (No Switch) SUCTION SIZE: Male Garden Hose DISCHARGE SIZE: Male Garden Hose MAXIMUM SOLIDS HANDLING SIZE: Clear Water Only AMP DRAW (full load): CORD LENGTH: 6' w/ 3-prong grounded plug VOLTAGE: 115v AC, 60 Hz MAXIMUM WATER TEMPERATURE: 77°F (25°C)

Flotec FPSE2800A Thermoplastic Effluent Pump The FPSE2800A provides the answer to many effluent/dewatering situations where 3/4" solids handling is all that is needed. Automatic submersible effluent/dewatering pump Capable of handling 3/4" solids - ideal for basement installations, laundry facilities, underground parking, grain storage and construction sites Thermoplastic construction BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/3 MAXIMUM CAPACITY:  3600 GPH FLOW AT 10' LIFT:  2700 GPH SWITCH TYPE:  Tethered SWITCH ON LEVEL:  11-1/2" SWITCH OFF LEVEL:  4-1/2" DISCHARGE PIPE SIZE:  2" MINIMUM PIPE SIZE:  1-1/2" MAXIMUM SOLID HANDLING SIZE:  3/4" CORD LENGTH:  15' AMP DRAW:  7 amps VOLTAGE:  115v, 60 Hz

Flotec FP5172 Thermoplastic Sprinkler Pump 1.5 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads. KEY FEATURES Superior performance at depths to water of 20' or less Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance Ready-to-install 230 volt motor (dual voltage) Self-priming after pump housing is initially filled (Check Valve or Foot Valve required) 1 year limited warranty   BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1-1/2 MAXIMUM CAPACITY:  67 GPM FLOW at 10' LIFT and 30 PSI:  45 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  47 psi SUCTION PIPE SIZE:  1-1/2" NPT DISCHARGE PIPE SIZE:  1-1/2" NPT AMP DRAW (full load):  9.6 amps on 230v / 19.2 amps on 115v VOLTAGE:  230v / 115v , 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 25 amp for 115v MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)    

Flotec FP0S3000X Thermoplastic Waterfall/Utility Pump 4/10 HP With a quality design providing years of trouble free service our line of Thermoplastic waterfall / Utility pumps can help turn your backyard into a garden oasis.   KEY FEATURES Oil free and fish safe Stainless steel or engineered composite construction - superior corrosion resistance Dual ball bearing design - quiet, long lasting, years of trouble-free service High performance - ideal for waterfalls and streams WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  4/10 MAXIMUM LIFT:  25' MAXIMUM CAPACITY:  3000 GPH FLOW at 10' LIFT:  1900 GPH SWITCH TYPE:  Manual Operation (No Switch) DISCHARGE PIPE SIZE:  1-1/4" (Ships With Multiple Adapters) MAXIMUM SOLIDS HANDLING SIZE:   AMP DRAW (full load):  3 Amps CORD LENGTH:  15' w/ grounded 3-prong plug VOLTAGE:  115v AC, 60 Hz MAXIMUM WATER TEMPERATURE:  100°F (38°C)

Flotec FPSE3601A Cast Iron Sewage Pump 1/2 HP Rugged, sewage and effluent pumps are capable of handling solids up to 2". Available in cast iron design for a variety of wastewater applications. Heavy-duty, rugged cast iron automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Includes by-pass float switch for automatic or manual operation   BODY CONSTRUCTION:  CAST IRON HORSEPOWER:  1/2 MAXIMUM CAPACITY:  9000 GPH FLOW AT 10' LIFT:  5400 GPH SWITCH TYPE:  Tethered DISCHARGE PIPE SIZE:  2" NPT MINIMUM PIPE SIZE:  2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE:  2" CORD LENGTH:  10' AMP DRAW:  13 amps VOLTAGE:  115v. 60 Hz RECOMMENDED BREAKER:  20 amp

Flotec FPPM3600D Thermoplastic Pedestal Sump Pump 1/3 HP The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps.   FEATURES Replaces any existing brand of 1/3 HP pedestal pump Long lasting thermoplastic construction Quick, easy installation Fits in a 12" diameter basin and offers a 1-1/4" discharge 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  1/3 MAXIMUM CAPACITY:  3000 GPH FLOW AT 10' LIFT:  2460 GPH SWITCH TYPE:  Vertical SWITCH ON LEVEL:  10-1/2" SWITCH OFF LEVEL:  2-1/2" MINIMUM SUMP DIAMETER:  12" MINIMUM SUMP DEPTH:  12" DISCHARGE PIPE SIZE:  1-1/4" FNPT MINIMUM PIPE SIZE:  1-1/4" MAXIMUM SOLID HANDLING SIZE:   CORD LENGTH:  6' AMP DRAW:  3.5 amps VOLTAGE:  115V, 60 HZ RECOMMENDED BREAKER:  15 amps LIQUID TEMP RANGE:  32°F to 70°F(0°-21°C)  

Flotec FPPSS3000 Cast Iron Pedestal Sump Pump 1/3 HP The pedestal design is engineered for the easy installation and replacement of most other brands of pedestal pumps. FEATURES Replaces any existing brand of 1/3 HP pedestal pump Long lasting cast iron construction Quick, easy installation Fits in a 12" diameter basin and offers a 1-1/4" discharge 2 year limited warranty BODY CONSTRUCTION:  Cast Iron Base with Stainless Steel Column HORSEPOWER:  1/3 MAXIMUM CAPACITY:  3480 GPH FLOW AT 10' LIFT:  2700 GPH SWITCH TYPE:  Vertical SWITCH ON LEVEL:  10-1/2" SWITCH OFF LEVEL:  2-1/2" MINIMUM SUMP DIAMETER:  12" MINIMUM SUMP DEPTH:  12" DISCHARGE PIPE SIZE:  1-1/2" FNPT MINIMUM PIPE SIZE:  1-1/4" MAXIMUM SOLID HANDLING SIZE:   CORD LENGTH:  6' AMP DRAW:  3.5 amps VOLTAGE:  115V, 60 HZ RECOMMENDED BREAKER:  15 amp LIQUID TEMP RANGE:  32°F to 70°F(0°-21°C) 

Flotec FPSE3200A Thermoplastic Sewage Pump Durable, corrosion-resistant thermoplastic construction with 2" solids handling makes the FPSE3200A a great candidate for variety of wastewater applications.   Automatic submersible sewage pump Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites Durable, corrosion-resistant thermoplastic construction   BODY CONSTRUCTION: Thermoplastic HORSEPOWER: 4/10 MAXIMUM CAPACITY: 5250 GPH FLOW AT 10' LIFT: 2550 GPH SWITCH TYPE: Tethered SWITCH ON LEVEL: 12-1/2" SWITCH OFF LEVEL: 5-1/2" DISCHARGE PIPE SIZE: 2" MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications MAXIMUM SOLID HANDLING SIZE: 2" CORD LENGTH: 8' AMP DRAW: 8.5 amps VOLTAGE: 115v, 60 Hz RECOMMENDED BREAKER: 15 amps

Flotec FPZS25T Submersible Thermoplastic Sump Pump 1/4 HP Flotec's 1/4 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch.   Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications   Switch Type: Tethered - Operates in 14" basins or larger Horse Power: 1/4 HP GPH: 3,200 Max Lift: 20' Solids Handling: 3/16" Discharge: 1.5" NPT Power Cord: 8', Grounded

Flotec FPZS33T Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded

Flotec FPZS33V Submersible Thermoplastic Sump Pump 1/3 HP Flotec's 1/3 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/3 HP GPH:  3,600 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded 

Flotec FPZS50T Submersible Thermoplastic Sump Pump Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered on/off float switch. Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications Switch Type:  Tethered - Operates in 14" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1/5" NPT Power Cord:  8', Grounded

Flotec FPZS50V Submersible Thermoplastic Sump Pump 1/2 HP Flotec's 1/2 HP sump pump with energy-efficient design that produces high-output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Vertical on/off float switch can be used in smaller sump basins. FEATURES Thermoplastic construction - resists corrosion Zinc motor housing - dissipates heat quickly and extends motor life Stainless steel fasteners and hardware - for long life Smooth Flow Hydraulics - delivers high performance for demanding applications 1 Year Limited Warranty Switch Type:  Vertical - Operates in 10" basins or larger Horse Power:  1/2 HP GPH:  4,200 Max Lift:  22' Solids Handling:  3/16" Discharge:  1.5" NPT Power Cord:  8', Grounded