|
Flotec FP0S1250X Water Removal Utility Pump 1/6 HP, 1200 GPH
Good, dependable performance marks the Flotec FPOS1250X as the solution for many home dewatering applications.
KEY FEATURES
Plastic construction
Pumps to 3/16" depth
Switch for automatic operation sold separately
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/6 HP
MAXIMUM CAPACITY: 1200 GPH
FLOW at 10' LIFT: 840 GPH
DISCHARGE SIZE: 1" NPT (Female)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' w/ 3-prong grounded plug
MAXIMUM WATER TEMPERATUE: 77°F (25°C)
|
157.56 |
|
|
Flotec FP0S1775A IntelliPump™ Water Removal Utility Pump, Auto On/Off, 1/4 HP, 1790 GPH
The IntelliPump | Just plug this pump in and it automatically checks for traces of water, whether you are pumping basements or draining puddles.
KEY FEATURES
Innovative electronic controlled pump - Pump starts every 2-1/2 minutes to check for water. Shuts off if water is not detected
Perfect for surfaces that collect water such as basements, rooftops, or any shallow flooded area
Corrosion-resistant engineered resin construction
WARRANTY
2 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/4 HP
MAXIMUM CAPACITY: 1790 GPH
FLOW at 10' LIFT: 1260 GPH
DISCHARGE SIZE: 1" NPT (female)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 15' with 3-prong grounded plug
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
328.38 |
|
|
Flotec FP0S1300X Tempest™ Water Removal Utility Pump 1/6 HP, 1470 GPH
The Tempest™ is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.
KEY FEATURES
Multipurpose pump for emergency basement and sump draining, emptying ponds, appliances, wash down and roof dewatering
Draws water down to 3/16"
Corrosion-resistant, continuous duty submersible pump
Switch for automatic operation sold separately
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/6
MAXIMUM CAPACITY: 1470 GPH
FLOW at 10' LIFT: 930 GPH
DISCHARGE SIZE: 1" female (includes garden hose adapter)
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' long / 18-3 wire / T-handle on pump connector
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
184.08 |
|
|
Flotec CYCLONE™ Water Removal Utility Pump
The CYCLONE™ pumping system is designed for every day or emergency use. Perfect for transferring or removing unwanted water from waterbeds, aquariums, or non-draining sinks.
KEY FEATURES
Multipurpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks
Self-priming at 8-10 ft. vertically
Corrosion-resistant, compact and portable
WARRANTY
90-day limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/12
MAXIMUM LIFT: 43'
MAXIMUM CAPACITY: 350 GPH
FLOW at 10' LIFT: 300 GPH
SWITCH TYPE: Manual Operation (No Switch)
SUCTION SIZE: Male Garden Hose
DISCHARGE SIZE: Male Garden Hose
MAXIMUM SOLIDS HANDLING SIZE: Clear Water Only
AMP DRAW (full load):
CORD LENGTH: 6' w/ 3-prong grounded plug
VOLTAGE: 115v AC, 60 Hz
MAXIMUM WATER TEMPERATURE: 77°F (25°C)
|
207.48 |
|
|
Flotec FPSC1725X-03 Cast Aluminum Water Removal Utility Pump 1/4 HP 1250 GPH
Cast Aluminum construction provides years of service for those emergency water removal situations.
FEATURES
Heavy-duty, epoxy coated, cast aluminum construction
Portable pump for emergency water removal or emptying shallow flooded areas
Draws water down to 1/8"
Switch for automatic operation sold separately
3-year limited warranty
BODY CONSTRUCTION: Cast Aluminum
HORSEPOWER: 1/4 HP
MAXIMUM CAPACITY: 1320 GPH
FLOW AT 10' LIFT: 1020 GPH
DISCHARGE SIZE: 1¼" (male) NPT
VOLTAGE: 115v AC, 60 Hz
CORD LENGTH: 8' with 3-prong grounded plug
MAXIMUM WATER TEMPERATURE: 120°F (50°C)
|
191.10 |
|
|
Flotec FP0S3000X Thermoplastic Waterfall/Utility Pump 4/10 HP
With a quality design providing years of trouble free service our line of Thermoplastic waterfall / Utility pumps can help turn your backyard into a garden oasis.
KEY FEATURES
Oil free and fish safe
Stainless steel or engineered composite construction - superior corrosion resistance
Dual ball bearing design - quiet, long lasting, years of trouble-free service
High performance - ideal for waterfalls and streams
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 4/10
MAXIMUM LIFT: 25'
MAXIMUM CAPACITY: 3000 GPH
FLOW at 10' LIFT: 1900 GPH
SWITCH TYPE: Manual Operation (No Switch)
DISCHARGE PIPE SIZE: 1-1/4" (Ships With Multiple Adapters)
MAXIMUM SOLIDS HANDLING SIZE:
AMP DRAW (full load): 3 Amps
CORD LENGTH: 15' w/ grounded 3-prong plug
VOLTAGE: 115v AC, 60 Hz
MAXIMUM WATER TEMPERATURE: 100°F (38°C)
|
334.62 |
|
|
Flotec FPDMP21SA Drill Pump for Water Removal - 225 GPH
Thermoplastic drill pump works with electric drills. Ideal to pump water or change oil with your electric drill as a power source.
FEATURES
Multi-purpose pump
Maximum pumping capacities up to 225 GPH
Minimum drill speed 1200 RPM
|
14.70 |
|
|
Flotec N76-46P Pump Body
This is the durable plastic pump body, that is specially designed for use with Flotec shallow well jet pumps.
Replacement pump body N76-46P covers the pump impeller and directs water flow through the pump. This part replaces a worn or damaged body to restore proper pumping.
The Flotec, Simer and Sta-Rite pumps have interchangeable parts. If the part number is the same, it will work in any of the Flotec, Simer and Sta-Rite pumps.
|
122.85 |
|
|
Flotec Portable Utility Booster Pump
Manages a variety of home applications including sprinkling, pressure boosting and dewatering.
Can be used as a portable sprinkler pump
Ideal for boosting pressure to wash cars, boats and farm equipment
115V air cooled motor and has a 1 year limited warranty
BODY CONSTRUCTION: Thermoplastic
HORSEPOWER: 1/2 HP
MAXIMUM PRESSURE: 62 PSI
MAXIMUM CAPACITY: 10.3 GPM
FLOW at 10' SUCTION LIFT and 30 PSI: 5.1 GPM
SWITCH TYPE: No Switch (Manual Operation)
SUCTION SIZE: 1" (ships with garden hose adapter)
DISCHARGE SIZE: 1" (ships with garden hose adapter)
MAXIMUM SOLIDS HANDLING SIZE: .06"
AMP DRAW (full load): 7 Amps
CORD LENGTH: 6' w/ 3-prong grounded plug
VOLTAGE: 115v AC, 60 Hz
|
386.88 |
|
|
Flotec Diffuser for 1HP Pumps N101-29P
Flotec Diffuser
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
26.46 |
|
|
Flotec FP2211 2-Wire 4 Inch Submersible Well Pump, 115 Volts 1/2 HP
4" Submersible Pumps are the most economical, energy-efficient pumps for 4" wells or larger. They provide the optimum amount of water and pressure for general home and farm use.
KEY FEATURES
For 4" inside diameter or larger wells
Pumps from depths of 150ft
Floating Stack Design for sand resistance and reduced sand locking
Corrosion-resistant stainless steel pump and motor housing
WARRANTY
3 year limited warranty
HORSEPOWER: 1/2
PERFORMANCE SERIES: 10 GPM
VOLTAGE: 115v, 60 Hz
NUMBER OF WIRES: 2 plus ground
BODY CONSTRUCTION: Stainless Steel and Thermoplastic
MAXIMUM CAPACITY: 13.6 GPM
OPERATION RANGE: 20' to 150'
MAXIMUM DEPTH-TO-WATER: 150'
MAX PSI: 105 psi
PUMP DIAMETER: 3.78"
DISCHARGE PIPE SIZE: 1-1/4" NPT
RECOMMENDED BREAKER: 25 amp
|
573.75 |
|
|
Flotec FP5532 Cast Iron Centrifugal Pump 1 HP
Economical, general purpose centrifugal pumps can be used for water transfer, circulation, fountains, waterfalls, pressure boosting and sprinkling.
FEATURES
Superior performance at depths to water of 25' or less
Rugged, heavy-duty cast iron pump housing
Maximum pumping capacities to 68 GPM
Ready-to-install 230 volt motor (dual voltage)
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1
MAXIMUM CAPACITY: 47 GPM
MAXIMUM LIFT: 25'
MAXIMUM DISCHARGE PRESSURE: 49 psi
MAXIMUM INLET PRESSURE:
MAXIMUM TOTAL PRESSURE:
SUCTION PIPE SIZE: 1-1/4" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 7.4 amps on 230v / 14.8 amps on 115v
VOLTAGE: 230v / 115v , 60 Hz
RECOMMENDED BREAKER: 15 amp for 230v / 20 amp for 115v
LIQUID TEMP RANGE: 140 °F (60 °C)
|
531.75 |
|
|
Flotec FPSE3601A Cast Iron Sewage Pump 1/2 HP
Rugged, sewage and effluent pumps are capable of handling solids up to 2". Available in cast iron design for a variety of wastewater applications.
Heavy-duty, rugged cast iron automatic submersible sewage pump
Capable of handling 2" solids - ideal for basement installations, pumping below grade toilets, laundry facilities, underground parking, grain storage and construction sites
Includes by-pass float switch for automatic or manual operation
BODY CONSTRUCTION: CAST IRON
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 9000 GPH
FLOW AT 10' LIFT: 5400 GPH
SWITCH TYPE: Tethered
DISCHARGE PIPE SIZE: 2" NPT
MINIMUM PIPE SIZE: 2" for sewage applications / 1-1/2" for effluent applications
MAXIMUM SOLID HANDLING SIZE: 2"
CORD LENGTH: 10'
AMP DRAW: 13 amps
VOLTAGE: 115v. 60 Hz
RECOMMENDED BREAKER: 20 amp
|
699.00 |
|
|
Flotec FP0012-6U Discharge Hose
SUMP PUMP DISCHARGE HOSE
Flotec- Discharge Hose 1-1/4” x 24' with Cuff and Clamp.
This was part # FP150-24
Flotec, Simer and Sta-Rite parts are interchangeable. The Brand name does not matter, only the part number must be the same
|
20.30 |
|
|
Flotec FP4105 Cast Iron Jet Pump 1/2 HP
New cast iron shallow well jet pump is ideal for wells with pumping levels of 25' or less. Self-priming after the pump housing is initially filled with water.
KEY FEATURES
Reliable performance at 25' depth to water or less
Maximum pressures of 63 PSI and maximum pumping capacities to 5.1 GPM
Pump housing is constructed of heavy-duty cast iron and is ready to install
115 volt 1/2 HP
Fan cooled, completely enclosed motor
1" Suction Port and 1" Discharge Port
WARRANTY
1 year limited warranty
BODY CONSTRUCTION: Cast Iron
HORSEPOWER: 1/2
MAXIMUM CAPACITY: 5.6 GPM
FLOW at 10' LIFT and 40 PSI: 4.5 GPM
MAX LIFT: 25'
MAXIMUM PRESSURE: 63 PSI
PRESSURE SWITCH SETTING: 30/50
SUCTION PIPE SIZE: 1" NPT
DISCHARGE PIPE SIZE: 1" NPT
AMP DRAW (full load): 7.2 amps
VOLTAGE: 115v, 60 Hz
RECOMMENDED BREAKER: 15 amp
MAXIMUM WATER TEMPERATURE: 140 F (60 C)
|
381.42 |
|