Flojet BW5000-000A Bottled Water Pump Single Inlet Pump quality water from commercial bottles to ensure better-tasting hot and cold beverages. The new BW5000-000A Series Bottled Water System is designed to work with coffee/tea makers, refrigerator ice and water dispensers, espresso carts and portable sinks or any use requiring portable potable water. The 5000 Series Bottled Water System is also designed for convenience. The pump automatically shuts off when the water source is depleted and restarts when water is restored. Its compact size supports easy mounting.   Illuminated on/off switch: provides clear visibility in dark or hard-to-reach places Long-life motor: ensures years of reliable operation   Flojet diaphragm pump: runs dry without damage, extending pump life Quick connect port: speeds installation and replacement of suction and discharge tubing Quiet operation: minimizes noise pollution with noise-dampening rubber feet Thermal overload protection: prevents overheating, protecting the pump and control box from damage

Flojet 18555-000A Portable Rv Macerator Flojet Macerator Pump System for RV 12V, Up to 12.5GPM, 3” RV Direct Connection, Garden Hose Discharge Port, Wired Remote Control

Flojet 18599-000A Adapter  The Flojet Macerator RV Sanitary Adapter used for discharge of Black water.

Flojet 20730-000A Kit Diaph W/O'Rings  

Flojet 20751-000A Kit Shaft &Amp; Slide Vlv  

Flojet 20753-000A Kit End Cap  

Flojet 20896-000A Kit Flg &Amp; Hsg W/O'Ring  

Flojet 20908-000A Pump Head Viton W/Switch  

Flojet 20925-000A Cap & Buna O'Ring

Flojet 21000-006B Suct Tube Assem For Bw1000  Flojet- Suction Tube Assembly for Bottled Water Pump

Flojet D71X000A Mpu 12V B/B 3C N/Sw Bp60 Flojet Duplex II Diaphragm Pump, with Polypropylene Body Construction, Buna Diaphragm, Buna Check Valve, 50 PSI Pressure Bypass. Motor is 12 Volt DC. Inlet Port is 3/8 inch NPT Female, Discharge Port is 3/8 inch NPT Female.   The Flojet D71X000A Duplex II Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are liquid transfer, spraying, cooling, circulation, filtration and dispensing. This pump is generally used for general Agricultural applications. If pumping a liquid other than water the pump should be flushed with water if applicable after each use.

Flojet G575235 Air Pump Sp1 3/8Hbe 3/8Hbe The Flojet G575235 is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Santoprene Diaphragm, Santoprene Check Valve, EPDM O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability. The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life.  This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling.   The Flojet G575235 Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. Pump will operate according to air supply.

Flojet 01740-012 Strainer 1/2" Barb X Quad These Flojet strainers are compatible with fresh or salt water and meet FDA standards for portable water. They will handle up to 7 gpm, have twist off clear bowls, and 40 mesh stainless steel screens.

Flojet D21X003 12V 2Bp Pbv Pump  Flojet- Diaphragm Pump Duplex II 12V, 3/8”FNPT Ports, Double Bypass 60psi, Polypropylene, Viton Valves, Santoprene Diaphragm, On-Off Switch

FloJet 01720-123S Strainer 3/8 Brb x 3/8 Npt PP This is the replacement part for FloJet 01720-123 Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)