|
BURKS 10GA5-1 1/4AB, Centrifugal Pump 1HP 115/230v
All BRONZE Construction.
Close Coupled to a 1 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 4.13 Inches.
|
2368.43 |
|
|
BURKS 15WA6, Centrifugal Pump Self Priming 115/230v
Bronze Fitted Cast Iron Construction w/ Plastic Impeller. Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/2 Inches NPT Outlet.
|
2122.20 |
|
|
BURKS 7G5-1 1/4, CENTRIFUGAL PUMP 1PH 3/4HP 115/230V
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4 Inches.
|
1432.80 |
|
|
BURKS 30WA6, Centrifugal Pump 115/230v 3HP
Burks 30WA6 Centrifugal Pump, Self Priming, 60 Hz, Single Phase, 3500 RPM, 3 Horsepower, ODP Motor Enclosure.
Close Coupled to a 3 Horsepower 115/230 Volts motor
Bronze Fitted Cast Iron Construction w/ Plastic Impeller.
Ports are 1-1/2 Inches NPT Inlet, 1-1/2 Inches NPT Outlet.
Please contact us for a shipping quote at http://www.clrmarine.com/Contact_Us
|
2650.46 |
|
|
Goulds GT10 Self-Prime Centrifugal Pump 1Hp 115/230
|
832.50 |
|
|
March Mag-Drive Centrifugal Pump Plastic 230V Hi Speed Beer Pump
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
Unit System 60Hz 50Hz Max Flow
6 GPM
18.9 LPM
Max Head
12.1 FT
2.5 M
Power
.04 HP
.029 KW
Electrical
230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1/2"MPT
Outlet
1/2"MPT
Wet End
Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Can handle liquids of 250F
Materials are FDA Food Compliant
With 6 Foot Cord and Plug
Components are UL Recognized
American Made
|
358.80 |
|
|
SeaLand VG4 J Series 24V Pump Replacement 385311230
Pump assembly for the VG4 (Vacuum generator 4)
This assembly includes the following items:
Pump to tank seal
2" Duckbills (4)
2" Check valve adapter
Transition adapter 2" to 1.5"
Pump mounting hardware
Pump body
Pump o'ring kit
Bellows
Bellows clamps
Bellows bushing
Eccentric
Pump top closure
Motor
Pump cover
|
1268.59 |
|
|
Berkeley S39518 CP High Head
Berkeley S39518 is a high head, series CP, centrifugal pump with a noryl impeller. The CP series pumps have a heavy-duty cast iron construction and feature a heavy-duty motor with easy service design and four-position discharge.
Features
3/4 HP
Motor Voltage: 115/230
Pipe Tapping Sizes: Suction 1-1/4 in, Discharge 1 in.
Drain port provided for easy winterizing
All models include replaceable wear ring and feature back pull-out design for easy serviceability
CP Series with Noryl impellers are abrasion-resistant for normal applications with working temperatures to 140°F
Applications
Water systems and sprinkling for homes, farms and industry
This item has a warranty of 12 months from date of original installation, or 18 months from date of manufacture.
|
1059.84 |
|
|
BERKELEY B82456-01, SSHM-2 SERIES PUMP
Berkeley B82456-01 SSHM-2 Series Stainless Steel Centrifugal Pump, 2 HP, 230 Volts, Single Phase, 1-1/2" Suction, 1-1/4" Discharge.
Contact us for shipping cost at www.clrmarine.com/Contact_Us
|
2081.52 |
|
|
Oberdorfer 405M-04-M26 Pump 3/4Hp 1725Rpm 115/230
NSN: 1304038-18-5
FEATURES
Pump Body:
Bronze
Ports:
1" NPT and 1 1/2" Hose
Flow:
24 GPM at 20 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
Motor / Drive:
Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.
APPLICATIONS / CHARACTERISTICS
RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED
Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.
Oberdorfer Flexible Impeller Utility Pump, 1"NPT Ports, Neoprene Impeller, 3/4HP 115/230V ODP Motor
|
1623.96 |
|
|
March Pump- Mag-Drive Centrifugal 115V Pump 1X3/4 Smooth Ports
• March AC-4C-MD and BC-4C-MD series pumps can deliver a maximum flow of 14 GPM (50 LPM), and are capable of serving applications with a maximum head of 21.5 ft. (4.7 m) (49 ft. [15.6 m] when driven by an air motor).
• Applications include electronic medical equipment, etching machines, photo processing equipment, hospital thermal blankets and food heating cabinets.
• Standard construction is of polypropylene, with optional wetted materials that include Ryton or Kynar. Other materials include: Ceramic, Buna N rubber, and Viton for total chemical compatibility.
• Drive choices are a 1/12 HP (.062 kw), 3450 rpm air cooled or a 1/10 HP (.074 kw) 3450 rpm blast-cooled, 115-volt single phase, 50/60 Hz. motor. 230 volt optional.
March Pump Mag-Drive Centrifugal Pump 115V Air Cooled 14GPM 1" Hose Inlet, 3/4" Hose Outlet
|
506.86 |
|
|
BURKS 3CT5M, Turbine Pump 1/3HP 1PH 115/230 volt
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/3 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1918.80 |
|
|
BURKS 5CT7M, TURBINE PUMP 1/2HP 1PH 115/230V
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
FEATURES
Cast Iron/Bronze/ Stainless Steel construction
Low Flow - High Pressure
FOUR POSITION CASING
Discharge can be located in any of four positions.
Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.
ENCLOSED BRONZE IMPELLER
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft.
ENCLOSED GLASS FILLED NORYL® IMPELLER
Of the latest hydraulic design for maximum efficiency, impeller has molded in brass insert threaded onto stainless steel motor shaft. *Noryl® Impeller is not designed for use with hydrocarbons.
MECHANICAL SHAFT SEAL
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa).
Ceramic seat and carbon seal face for long trouble-free service.
Special seals are available for higher temperatures and fluids other than water.
MOTORS
Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.
FACTORY TESTED
After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards.
UNSPSC Code: 40150000
|
2069.10 |
|
|
Oberdorfer 172B-B26 Cent Pump 115V 1/6Hp 3/4"
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
13 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Seals - Type 6A/68 Buna Standard, Viton Optional
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP permanent Magnet 12V, 24V, 32V DC.
Rubber base grommets for vibration dampening
1/13 HP Permanent Magnet 12V DC Motor - 172L threaded shaft style.
1/8 HP Capacitor Start 50/60 HZ, 115V & 220V AC Motors with Ignition protection, Thermal overload protection, Power cord with plug.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump, 1/8HP 115V Ignition Protected Motor, 3/4"NPT Ports
Cruisair P950B
|
1608.30 |
|
|
BURKS 7CT5M, Turbine Pump 3/4HP 1PH 115/230v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
2188.80 |
|