AMT Pump 4821-95 Rotary Hand Pump Cast Iron Heavy-duty Cast Iron body with Buna-N seal 5 GPM @70 RPM (11 oz./stroke) Carbon vanes 0.75" suction x 1" discharge ports 0.75-Inch NPT steel discharge spout assembly (included) 1-Inch NPT x 40-Inch steel suction tube assembly (included) 2-Inch Cast Iron Bung adapter Maximum Temperature 160F Self-Priming Capable of handling compatible fluids with a maximum of 5,000 SSU viscosity at a minimum of 70 degrees F liquid temperature (roughly equivalent to SAE 40 motor oil) Liquids must be free of debris and solids for proper operation

AMT Pump 429F-K8-10F36JT Pump/Motor Assy

AMT Pump 4822-95 Rotary Hand Pump AMT Rotary Drum Pump 1" Suction & 3/4" Discharge Buna-N Shaft Seal Includes: Bung Adapter & Suction Tube Included Material: Cast Iron

AMT Pump 5760-95 1Hp 2"Npt 115V CI-SS Submersible Shredder Sewage Pump 5760-95, 130 GPM, 1.0 HP, Carbide Tipped Cast Iron construction with stainless steel motor housing 1.0 HP, 14 Amps, 115 volts, continuous duty, single phase electric motor Can handle solids up to 1 inch Triplex seal system 2 inch output port with a discharge rate of 7800 gallons per hour The AMT by Gorman-Rupp 5760-95 is an industrial grade shredder sewage pump that is designed to handle sludge and dirty water applications.  Features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging when pumping sludge type waste.  Liquid content still must be above 85% to keep from damaging the pump and possibly void the warranty.

Amt 5351-95, Cast Iron Coolant Pump 230/460volt  INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS   1/4 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts  0.8/0.4 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 56 GPM and 26 PSI 3/4" FNPTOutlet   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants. AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.  

AMT 5390-95, Immersion Coolant Oil Pump 23gpm 115volt INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS   1/4 HP Totally Enclosed Motors (TEFC) 115/230 volts, 3.0/1.5amps Single or Three Phase Motors Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry 1/2 inch FNPT Ports Delivers up to 23 GPM and 26 PSI   Replacement For The Following Standard Machine Tool Industry Pumps  Fuji: VKP-063A Old Fuji: VKN-061A Mitsubishi: NQ100J  Toshiba: OPF-100M Hitachi: CPD-100M Yasukawa: VFPC-100 Graymills: IMV-25 Gusher: VBV-14   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.

AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   Cast Iron Construction 1/4 HP 230/460V 3 Phase Immersion Type Shaft Seal Material: Sealless Design Speed (RPM): 3450 Type: IMM Voltage: 230/460 Fluid Port: 0.5" HP:1/4 Impeller Material: Stainless Steel GPM: 23   Replacement for Standard Machine Tool Industry Pumps  Fuji: VKP-063A Old Fuji: VKN-061A Mitsubishi: NQ100J  Toshiba: OPF-100M Hitachi: CPD-100M Yasukawa: VFPC-100 Graymills: IMV-25   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants. AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.  

Amt 5764-95 Sub Shredder Pump 3" Npt SUBMERSIBLE SHREDDER SEWAGE PUMP   Cast Iron with Stainless Steel Motor Housing Carbide-Tipped Shredder Impellers Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability Silicon Carbide Lower Seal 3" NPT Port Sizes Max. Temperature 104° F  3 HP 230 Volt     AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.   AMT Submersible Shredder Sewage Pumps are reliable, cost effective and low maintenance.    

AMT Pump 5272-98 SS Rotary Drum Pump Drum Pump, Stainless Steel, 1" NPT Suction x 3/4" NPT Discharge Port Rotary drum pump for transfer of chemicals and liquids including many acids, acetones, trichloroethylene, solvents, photographic chemicals and ketones. Hand-operated rotary lever action 304 stainless steel construction with carbon vanes and a Teflon (PTFE) seal for resistance to chemicals and corrosion Flow rate of 12 oz. per stroke (5 gpm at 70 rpm) 1" female NPT inlet port and 3/4" female NPT outlet port

AMT 3682-95 Straight Centrifugal Pedestal Pump Mechanical Seal: Buna-N Maximum Temperature: 180° F 3/4 in. NPT Suction Ports 1/2 in. NPT Discharge Ports Maximum Working Pressure: 75 PSI Self-cleaning Impeller on General Service Models Maximum Flow 35 GPM Maximum Head 148 Ft. Epoxy Coated Pedestal Drive and Discharge Port Rotates in 90° Increments on High Head Models   All pumps have Cast Iron Casing with Stainless Steel Impeller   AMT Straight Centrifugal Pedestal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal for sprinkler systems and pressure boosting. Pull-from-the-rear design permits easy servicing without disturbing any piping. Pedestals feature CNC machined shafts with sealed ball bearings. AMT Straight Centrifugal Pedestal pumps are reliable, cost effective and low maintenance. For use with nonflammable liquids compatible with pump component materials.

AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   1/8 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts, 0.3/0.19 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 10 GPM 3/8 inch outlet diameter   Able to pump liquid down to 2 inches Replacement for to following Standard Machine Tool Industry Pumps  Fuji: VKP-053A Old Fuji: VKN-051A Mitsubishi: NQ-60J Toshiba: OPF-60M Hitachi: CPD-060M Yasukawa: VFPC-061DIF Graymills: IMV-08   Gusher: VBV-18

AMT 285P-95, Self-Priming Centrifugal Pump 3/4 HP, 3 PH, 230/460 V Cast Iron Construction Buna-N Mechanical Seal and O-Ring with optional Viton? or Silicon Carbide Mechanical Seal and O-ring 1" & 1-1/4" NPT Suction and Discharge Ports Dual Volute Design Reduces Radial Load on Motor Maximum Working Pressure 75 PSI Maximum Temperature 180 F Self-cleaning, Semi-open Impeller

AMT 4942-99, Rotary Drum Pump ROTARY DRUM PUMP   Type: Rotary Inlet: 1" Outlet: 1" Bung Adapter: Yes Construction: Ryton Seal: Teflon

AMT Pump 2825-95 Pump Cast Iron Self Prime 3/4Hp 1Ph Pump Body: Cast Iron  Shaft Seal: Buna-N Shaft Seal  Port Size: 1-1/2 inch x 1-1/2 inch NPT Ports.  Motor Specs : 3/4 Horsepower, 115/230 Volts, Single Phase, ODP (Open Drip Proof) NEMA 56J Frame Electric.   Product Specs : Cast Iron Construction with Buna-N Seals Handles 3/8 Inch Diameter Semi-solids NEMA 56J Motors with Stainless Steel Shaft Maximum Working Pressure 75 PSI Self-primes to 20 Ft. Self-cleaning, Clog Resistant Impeller Steel Base and Handle Included Dual Volute Design

AMT Pump 282L-95 3Ph 2Hp Open Drip-Proof 56J 230/460 AMT Pump 282L-95, 1-1/2" Cast Iron Self-Priming Centrifugal Pump Self-Priming Centrifugal Electric Driven Pump HP: 2HP Motor Frame Size: 56J Voltage: 230/460V Phase: 3 Shaft Seal Material: Buna-N / Stainless Steel