|
Amt 429N-K8 Peo Kit 1" SS 2Hp 3Ph
|
729.00 |
|
|
1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS
Investment Cast 300 Series Stainless Steel Construction
Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide
1" NPT Port Sizes
Self-priming to 6 ft.
ODP and TEFC, Single or 3 phase 56 frame motors
Available in 1/3 to 2 Horsepower
Delivers up to 66 GPM and 29 PSI
AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability.
AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
979.30 |
|
|
Amt 4294-98 Centrif Pump, 1" Ss, Viton
1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS
Investment Cast 300 Series Stainless Steel Construction
Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide
1" NPT Port Sizes
Self-priming to 6 ft.
ODP and TEFC, Single or 3 phase 56 frame motors
Available in 1/3 to 2 Horsepower
Delivers up to 66 GPM and 29 PSI
AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability.
AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
887.76 |
|
|
Scot Pump 48451X-1/2 HP MPU 1/2 HP 1PH
Pump
• Seawater Bronze case, impeller adapter
• Seawater Bronze 7/8” shaft
• Impeller keyed to stub shaft and secured by washer and locking assembly
• O-ring case gasket
Motor
• Standard NEMA frame motor
• 1 and 3 phase
|
1785.00 |
|
|
Amt 3893-98 1 1/2 In Ss Self Primer
|
1645.92 |
|
|
AMT Pump 5272-98 SS Rotary Drum Pump
Drum Pump, Stainless Steel, 1" NPT Suction x 3/4" NPT Discharge Port
Rotary drum pump for transfer of chemicals and liquids including many acids, acetones, trichloroethylene, solvents, photographic chemicals and ketones.
Hand-operated rotary lever action
304 stainless steel construction with carbon vanes and a Teflon (PTFE) seal for resistance to chemicals and corrosion
Flow rate of 12 oz. per stroke (5 gpm at 70 rpm)
1" female NPT inlet port and 3/4" female NPT outlet port
|
736.60 |
|
|
Oberdorfer 900C-W25 Pump Self Prime 2" 2Hp 1Ph
|
2084.14 |
|
|
Goulds 1St1G4A4 Npe 1X1 1/4 2Hp Tefc 1Ph
Goulds- Centrifugal Pump Stainless Steel NPE Series, 1 1/4” x 1”FNPT, 115/230V 60HZ 2HP 1Phase 3500RPM TEFC, 6.12” Impeller, Carbon/Sil-Carbide/Viton Seal
|
1800.00 |
|
|
Amt 4298-K8 1" Ss Peo Kit
|
1021.42 |
|
|
BURKS 5CT5M, TURBINE PUMP 115/230V 1/2HP 1PH
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1978.20 |
|
|
BURKS 5CT6M, TURBINE PUMP 115/230V 1/2HP 1PH
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
UNSPSC Code: 40150000
|
1978.20 |
|
|
BURKS 5CT7M, TURBINE PUMP 1/2HP 1PH 115/230V
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.
FEATURES
Cast Iron/Bronze/ Stainless Steel construction
Low Flow - High Pressure
FOUR POSITION CASING
Discharge can be located in any of four positions.
Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line.
ENCLOSED BRONZE IMPELLER
Of the latest hydraulic design for maximum efficiency, impeller is balanced for vibration-free operation and threaded onto stainless steel motor shaft.
ENCLOSED GLASS FILLED NORYL® IMPELLER
Of the latest hydraulic design for maximum efficiency, impeller has molded in brass insert threaded onto stainless steel motor shaft. *Noryl® Impeller is not designed for use with hydrocarbons.
MECHANICAL SHAFT SEAL
Standard self-adjusting shaft seal for temperatures to 225°F (107°C) and pressures to 150 psi (1034 kpa).
Ceramic seat and carbon seal face for long trouble-free service.
Special seals are available for higher temperatures and fluids other than water.
MOTORS
Standard pump motors are of open drip proof (ODP) construction and are rated with jet pump service factors for continuous duty operation. Motors are 56 frame size with NEMA standard mounting flange, one piece threaded stainless steel shaft and ball/ball bearing construction.
FACTORY TESTED
After careful assembly and inspection, EVERY pump is factory tested and meets Hydraulic Institute standards.
UNSPSC Code: 40150000
|
2069.10 |
|
|
Cat Pump 8120 Motor 2Hp 1Ph 115/208-230V
The CAT Pumps 8120 is a 2 horsepower, 1 phase,60 Hz Electric Motor, electric powered industrial duty motor. It runs a maximum speed of 1750 RPM. Compatible with 115/208-230V electrical connections. Shaft diameter measures 5/8". The motor is housed in a 56HC frame.
Specifications:
Horsepower: 2
Shaft Diameter: 5/8"
Maximum Volts: 115/208-230V
Frequency: 60 Hz
Full Load Amps: 17.2/9.53–8.62
RPM: 1750
Thermal Overload: No
Phase: 1
Frame Size: 56HC
Service Factor: 1.4
CSA, CE and UL recognized
|
735.36 |
|
|
Oberdorfer 8214 1/3Hp Xp 1Ph Motor
|
1610.88 |
|
|
Jabsco 12520-1274 Pump 1/4Hp Tefc 1Ph
This item is 'build to order'. Please contact us for lead time.
|
1290.07 |
|