Amt 4294-98 Centrif Pump, 1" Ss, Viton  1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

Amt 4298-K8 1" Ss Peo Kit  

Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump 80gpm, 1-1/4" Outlet 3/4HP 3PH

AMT Pump 4294-030-00 Motor Adapter Xc1 To Mbv

AMT Pump 4294-010-00 Imp Xss 0.33Hp Mbv -01

1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000. • Cast Iron & Stainless Steel Construction • Buna-N Mechanical Seals on Cast Iron Models • Viton® Mechanical Seals on Stainless Steel Models • Optional Silicon Carbide Mechanical Seals Available • 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes • Dual Volute Design Reduces Radial Load on Motors • Maximum Temperature ◆ Buna-N 180° F ◆ Viton® 200° F • Self-Cleaning, Semi-Open Impeller • Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings

AMT 285P-95, Self-Priming Centrifugal Pump 3/4 HP, 3 PH, 230/460 V Cast Iron Construction Buna-N Mechanical Seal and O-Ring with optional Viton? or Silicon Carbide Mechanical Seal and O-ring 1" & 1-1/4" NPT Suction and Discharge Ports Dual Volute Design Reduces Radial Load on Motor Maximum Working Pressure 75 PSI Maximum Temperature 180 F Self-cleaning, Semi-open Impeller

AMT 3682-95 Straight Centrifugal Pedestal Pump Mechanical Seal: Buna-N Maximum Temperature: 180° F 3/4 in. NPT Suction Ports 1/2 in. NPT Discharge Ports Maximum Working Pressure: 75 PSI Self-cleaning Impeller on General Service Models Maximum Flow 35 GPM Maximum Head 148 Ft. Epoxy Coated Pedestal Drive and Discharge Port Rotates in 90° Increments on High Head Models   All pumps have Cast Iron Casing with Stainless Steel Impeller   AMT Straight Centrifugal Pedestal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal for sprinkler systems and pressure boosting. Pull-from-the-rear design permits easy servicing without disturbing any piping. Pedestals feature CNC machined shafts with sealed ball bearings. AMT Straight Centrifugal Pedestal pumps are reliable, cost effective and low maintenance. For use with nonflammable liquids compatible with pump component materials.

AMT Pump 5272-98 SS Rotary Drum Pump Drum Pump, Stainless Steel, 1" NPT Suction x 3/4" NPT Discharge Port Rotary drum pump for transfer of chemicals and liquids including many acids, acetones, trichloroethylene, solvents, photographic chemicals and ketones. Hand-operated rotary lever action 304 stainless steel construction with carbon vanes and a Teflon (PTFE) seal for resistance to chemicals and corrosion Flow rate of 12 oz. per stroke (5 gpm at 70 rpm) 1" female NPT inlet port and 3/4" female NPT outlet port

Amt 3893-98 1 1/2 In Ss Self Primer  

AMT Pump 3152-95 Centrifugal Pump Cast Iron Heavy Duty Straight Centrifugal Pump HP: 5 Voltage: 230/460 Phase: 3 Type: Totally Enclosed, Fan Cooled Motor Frame Size: 184JM Shaft Seal Material: Buna-N / Stainless Steel AMT Crossover Model for Flint & Walling C55A503T  

Amt 5351-95, Cast Iron Coolant Pump 230/460volt  INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS   1/4 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts  0.8/0.4 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 56 GPM and 26 PSI 3/4" FNPTOutlet   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants. AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.  

AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   Cast Iron Construction 1/4 HP 230/460V 3 Phase Immersion Type Shaft Seal Material: Sealless Design Speed (RPM): 3450 Type: IMM Voltage: 230/460 Fluid Port: 0.5" HP:1/4 Impeller Material: Stainless Steel GPM: 23   Replacement for Standard Machine Tool Industry Pumps  Fuji: VKP-063A Old Fuji: VKN-061A Mitsubishi: NQ100J  Toshiba: OPF-100M Hitachi: CPD-100M Yasukawa: VFPC-100 Graymills: IMV-25   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants. AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.  

AMT Pump 4861-97 Brz Centrifugal Pump 12V 1/8 HP, Totally Enclosed, Not Ventilated, 12 volt DC electric motor Salt water resistant Naval Bronze construction Semi-open, self-cleaning impeller that can handle solids to 3/16 inch diameter Buna-N mechanical seal and O-ring The AMT 4861-97 is a lightweight 12 volt pump that is designed for use in live tanks, chemical transfer, salt water and general dewatering applications.     Features durable bronze construction with 3/4 inch NPT input and output ports.  Pump is NOT self-priming and requires flooded suction.