AMT 3201-96, Laundry Tray Pump 1/4 HP 115V GENERAL PURPOSE LAUNDRY TRAY PUMP   Cast Aluminum Construction Buna-N Mechanical Seal and O-Ring 1-1/4" NPT Suction and Discharge Port Self-cleaning, Semi-open Impeller Continuous Duty Motor 1725 RPM, 1/4 HP 115VAC Single Phase Open Drip Proof (ODP) 48Z Frame   The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a laundry tray pump but can be used for most gravity fed general service pumping applications. The open impeller design makes it particularly adaptable to dirty as well as clean liquids and is inherently resistant to clogging. The AMT Laundry Tray pump is readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

AMT 4230-97, Coolant Recirculating Pump 1 Phase, 115V, 3/8" NPT Female 3/8" BRONZE COOLANT RECIRCULATING PUMPS   Cast Bronze Construction No Bottom Bearing!!! Brass Column and Impeller Shaft Bronze Self-cleaning Open Impeller 3/8" NPT Discharge Port Maximum Flow 8 GPM Maximum Head 10 ft. Available with 115V AC Single Phase or 230V AC Three Phase Motors,1590 RPM 1/25 HP Totally Enclosed Fan Cooled (TEFC) Motor Delivers up to 8 GPM and 4 PSI   The AMT Bronze Coolant/Recirculating pump has been manufactured for a wide variety of Industrial/Commercial Coolant and Recirculating applications. The absence of a bottom bearing makes the unit ideal for handling erosive liquids. A 36" 3-conductor power cord is included. AMT Bronze Coolant/Recirculating pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast, 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

Amt 5764-95 Sub Shredder Pump 3" Npt SUBMERSIBLE SHREDDER SEWAGE PUMP   Cast Iron with Stainless Steel Motor Housing Carbide-Tipped Shredder Impellers Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability Silicon Carbide Lower Seal 3" NPT Port Sizes Max. Temperature 104° F  3 HP 230 Volt     AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.   AMT Submersible Shredder Sewage Pumps are reliable, cost effective and low maintenance.    

Amt 4294-98 Centrif Pump, 1" Ss, Viton  1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000. • Cast Iron & Stainless Steel Construction • Buna-N Mechanical Seals on Cast Iron Models • Viton® Mechanical Seals on Stainless Steel Models • Optional Silicon Carbide Mechanical Seals Available • 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes • Dual Volute Design Reduces Radial Load on Motors • Maximum Temperature ◆ Buna-N 180° F ◆ Viton® 200° F • Self-Cleaning, Semi-Open Impeller • Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings

1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

AMT Pump 3.38E-94 1.5Hp 2" Diaph Pmp Electr

AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   1/8 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts, 0.3/0.19 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 10 GPM 3/8 inch outlet diameter   Able to pump liquid down to 2 inches Replacement for to following Standard Machine Tool Industry Pumps  Fuji: VKP-053A Old Fuji: VKN-051A Mitsubishi: NQ-60J Toshiba: OPF-60M Hitachi: CPD-060M Yasukawa: VFPC-061DIF Graymills: IMV-08   Gusher: VBV-18

AMT Pump 368B-95 Strt Cent Pmp Iron 1/2Hp Engine/Motor Type: Total Enclosed Fan Cooled Horsepower: 0.5 HP Phase: Single-Phase Pump Voltage: 115 Volt (Single-Phase), 230 Volt (Single-Phase) Frequency: 60 Hz Rated Current: 9/5 Amps Pump RPM: 3450 Thermal Overload Protect: Yes Motor Frame: 56J Pump Type: Straight Centrifugal Pump Pump Style: Electric Centrifugal Pump Inlet Diameter: 3/4" Outlet Diameter: 1/2" Discharge Port Rotation: 90 Degree Increments Max Gallon Per Min (GPM) : 38.0 Max Total Head (Static): 57 Feet Maximum Pressure (PSI): 25 Max Working Pressure: 75 PSI Solids Handling: Yes Max Solids Handling (Inches): 0.125" Self Priming Pump: No Pump Housing Drain: Yes Housing Material: Cast Iron Impeller Type: Self-Cleaning, Semi-Open Impeller Material: Stainless Steel Seal Material (Mechanical Or Other): Buna-N Temperature RangeTo 180 F Port Type: NPT Altitude Affected: Yes

AMT Pump 5272-98 SS Rotary Drum Pump Drum Pump, Stainless Steel, 1" NPT Suction x 3/4" NPT Discharge Port Rotary drum pump for transfer of chemicals and liquids including many acids, acetones, trichloroethylene, solvents, photographic chemicals and ketones. Hand-operated rotary lever action 304 stainless steel construction with carbon vanes and a Teflon (PTFE) seal for resistance to chemicals and corrosion Flow rate of 12 oz. per stroke (5 gpm at 70 rpm) 1" female NPT inlet port and 3/4" female NPT outlet port

AMT 4942-99, Rotary Drum Pump ROTARY DRUM PUMP   Type: Rotary Inlet: 1" Outlet: 1" Bung Adapter: Yes Construction: Ryton Seal: Teflon

AMT 5750-99, Piston Drum Pump 1" NPT Discharge Port PISTON DRUM PUMP • All Polyethylene Construction • Upper Temperature Rating: 158 degrees fahrenheit  

Proven 360-115V, Utility Pump Self Priming Proven Pump Utility Pump is a Self Priming Rubber Impeller pump. With male Garden Hose Thread and 3/8”FNPT, It runs on 115V and pumps 360GPH.  This pump is NOT USCG Approved

AMT Pump 2P5X Pump Kit 5/8 Threaded

March Pump- Mag-Drive Centrifugal 115V Pump 1X3/4 Smooth Ports • March AC-4C-MD and BC-4C-MD series pumps can deliver a maximum flow of 14 GPM (50 LPM), and are capable of serving applications with a maximum head of 21.5 ft. (4.7 m) (49 ft. [15.6 m] when driven by an air motor). • Applications include electronic medical equipment, etching machines, photo processing equipment, hospital thermal blankets and food heating cabinets. • Standard construction is of polypropylene, with optional wetted materials that include Ryton or Kynar. Other materials include: Ceramic, Buna N rubber, and Viton for total chemical compatibility. • Drive choices are a 1/12 HP (.062 kw), 3450 rpm air cooled or a 1/10 HP (.074 kw) 3450 rpm blast-cooled, 115-volt single phase, 50/60 Hz. motor. 230 volt optional.      March Pump Mag-Drive Centrifugal Pump 115V Air Cooled 14GPM 1" Hose Inlet, 3/4" Hose Outlet