|
AMT Pump 3152-95 Centrifugal Pump Cast Iron
Heavy Duty Straight Centrifugal Pump
HP: 5
Voltage: 230/460
Phase: 3
Type: Totally Enclosed, Fan Cooled
Motor Frame Size: 184JM
Shaft Seal Material: Buna-N / Stainless Steel
AMT Crossover Model for Flint & Walling C55A503T
|
1437.76 |
|
|
Amt 4903-010-09 Impeller Brz 1.5Hp 3Ph
|
148.95 |
|
|
AMT Pump 429F-K8-10F36JT Pump/Motor Assy
|
1594.22 |
|
|
AMT Pump 282L-95 3Ph 2Hp Open Drip-Proof 56J 230/460
AMT Pump 282L-95, 1-1/2" Cast Iron Self-Priming Centrifugal Pump
Self-Priming Centrifugal Electric Driven Pump
HP: 2HP
Motor Frame Size: 56J
Voltage: 230/460V
Phase: 3
Shaft Seal Material: Buna-N / Stainless Steel
|
826.20 |
|
|
AMT 3682-95 Straight Centrifugal Pedestal Pump
Mechanical Seal: Buna-N
Maximum Temperature: 180° F
3/4 in. NPT Suction Ports
1/2 in. NPT Discharge Ports
Maximum Working Pressure: 75 PSI
Self-cleaning Impeller on General Service Models
Maximum Flow 35 GPM
Maximum Head 148 Ft.
Epoxy Coated Pedestal Drive and Discharge Port Rotates in 90° Increments on High Head Models
All pumps have Cast Iron Casing with Stainless Steel Impeller
AMT Straight Centrifugal Pedestal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal for sprinkler systems and pressure boosting.
Pull-from-the-rear design permits easy servicing without disturbing any piping. Pedestals feature CNC machined shafts with sealed ball bearings. AMT Straight Centrifugal Pedestal pumps are reliable, cost effective and low maintenance. For use with nonflammable liquids compatible with pump component materials.
|
380.84 |
|
|
Amt Pump 3/4Hp 3Ph Sc Seals
Self Priming Centrifugal Pump
Model Number: 285P-95
Voltage: 230/460
Horsepower: 3/4
Gallons Per Hour: 4020 (67 GPM)
3/4HP 230/460v/3 TEFC
|
841.60 |
|
|
AMT 285P-95, Self-Priming Centrifugal Pump 3/4 HP, 3 PH, 230/460 V
Cast Iron Construction
Buna-N Mechanical Seal and O-Ring with optional Viton? or Silicon Carbide Mechanical Seal and O-ring
1" & 1-1/4" NPT Suction and Discharge Ports
Dual Volute Design Reduces Radial Load on Motor
Maximum Working Pressure 75 PSI
Maximum Temperature 180 F
Self-cleaning, Semi-open Impeller
|
595.69 |
|
|
Applications for the TE-7R-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
March Pump's industrial TE-7R-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7R-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
60 FT
12.3 M
Power
.75 HP
.559 KW
Electrical
1PH 115/230V or 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing)
Motor Options
Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
|
1242.90 |
|
|
Applications for the TE-7R-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
March Pump's industrial TE-7R-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7R-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
60 FT
12.3 M
Power
.75 HP
.559 KW
Electrical
1PH 115/230V or 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing)
Motor Options
Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
|
1054.80 |
|
|
AMT Pump 368B-95 Strt Cent Pmp Iron 1/2Hp
Engine/Motor Type: Total Enclosed Fan Cooled
Horsepower: 0.5 HP
Phase: Single-Phase
Pump Voltage: 115 Volt (Single-Phase), 230 Volt (Single-Phase)
Frequency: 60 Hz
Rated Current: 9/5 Amps
Pump RPM: 3450
Thermal Overload Protect: Yes
Motor Frame: 56J
Pump Type: Straight Centrifugal Pump
Pump Style: Electric Centrifugal Pump
Inlet Diameter: 3/4"
Outlet Diameter: 1/2"
Discharge Port Rotation: 90 Degree Increments
Max Gallon Per Min (GPM) : 38.0
Max Total Head (Static): 57 Feet
Maximum Pressure (PSI): 25
Max Working Pressure: 75 PSI
Solids Handling: Yes
Max Solids Handling (Inches): 0.125"
Self Priming Pump: No
Pump Housing Drain: Yes
Housing Material: Cast Iron
Impeller Type: Self-Cleaning, Semi-Open
Impeller Material: Stainless Steel
Seal Material (Mechanical Or Other): Buna-N
Temperature RangeTo 180 F
Port Type: NPT
Altitude Affected: Yes
|
510.48 |
|
|
AMT Pump 316A-95 Sewage/Trash Pmp 2" 3Ph 3Hp
Self-Priming Electric Motor Driven Sewage / Trash Pump
2" Cast Iron 3 HP 230/460V 3 Phase TEFC
Motor Frame Size 56J
Totally Enclosed and Fan Cooled
Shaft Seal Material: Viton Silicon/Carbide
|
1309.78 |
|
|
Amt 5764-95 Sub Shredder Pump 3" Npt
SUBMERSIBLE SHREDDER SEWAGE PUMP
Cast Iron with Stainless Steel Motor Housing
Carbide-Tipped Shredder Impellers
Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability
Silicon Carbide Lower Seal
3" NPT Port Sizes
Max. Temperature 104° F
3 HP
230 Volt
AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.
AMT Submersible Shredder Sewage Pumps are reliable, cost effective and low maintenance.
|
1824.94 |
|
|
AMT Pump 2825-95 Pump Cast Iron Self Prime 3/4Hp 1Ph
Pump Body: Cast Iron
Shaft Seal: Buna-N Shaft Seal
Port Size: 1-1/2 inch x 1-1/2 inch NPT Ports.
Motor Specs : 3/4 Horsepower, 115/230 Volts, Single Phase, ODP (Open Drip Proof) NEMA 56J Frame Electric.
Product Specs :
Cast Iron Construction with Buna-N Seals
Handles 3/8 Inch Diameter Semi-solids
NEMA 56J Motors with Stainless Steel Shaft
Maximum Working Pressure 75 PSI
Self-primes to 20 Ft.
Self-cleaning, Clog Resistant Impeller
Steel Base and Handle Included
Dual Volute Design
|
695.25 |
|
|
Amt 4294-98 Centrif Pump, 1" Ss, Viton
1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS
Investment Cast 300 Series Stainless Steel Construction
Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide
1" NPT Port Sizes
Self-priming to 6 ft.
ODP and TEFC, Single or 3 phase 56 frame motors
Available in 1/3 to 2 Horsepower
Delivers up to 66 GPM and 29 PSI
AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability.
AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
887.76 |
|
|
Amt 5351-95, Cast Iron Coolant Pump 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts 0.8/0.4 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 56 GPM and 26 PSI
3/4" FNPTOutlet
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
507.94 |
|