AMT Pump 5411-95 Coolant Pump Cast Iron Imm Cast Iron Immersion Type Coolant Pump Oil Coolant Pumps Fluid Port: 1 HP: 1 Impeller Material: Stainless Steel Phase: 3 1" Cast Iron 1 HP 230/460V 3 Phase Immersion Type Shaft Seal Material: Sealless Design Speed (RPM): 3450 Type: IMM Voltage: 230/460

AMT Pump 3152-95 Centrifugal Pump Cast Iron Heavy Duty Straight Centrifugal Pump HP: 5 Voltage: 230/460 Phase: 3 Type: Totally Enclosed, Fan Cooled Motor Frame Size: 184JM Shaft Seal Material: Buna-N / Stainless Steel AMT Crossover Model for Flint & Walling C55A503T  

AMT Pump 429F-K8-10F36JT Pump/Motor Assy

AMT Pump 2P7XZR Hatz Diesel Fire Pump 2" Engine Driven Portable High Pressure pump is cast aluminum construction with cast iron volute and male NPT ports. Pump applications include fire protection and irrigation. These pumps are available with a wide choice of standard and heavy duty gasoline or diesel fueled engines. These pumps feature high efficiency closed cast aluminum impeller. All models come equipped with EPDM/EPR elastomers and seals. Most models include a heavy duty steel roll frame.   Features Removable/Replaceable Cast Iron Suction & Discharge Flanges Discharge Port Rotates in 90 Increments One Tool Serviceability, Tool Included with Engine Driven Models (Not with Kits) Includes Strainer and Rubber Foot Mounting Maximum Temperature 180 F Specifications Type: High Pressure Pumps Series: 2" Engine Driven Portable High Pressure Pumps Driver: Hatz Diesel 1B30 Seal Type & Elastomer/Faces: EPDM/EPR/CAR/CER Tank Size (Gal/Ltr): 1.32 / 5.0 Run Time (Hr.): 2.7 Mounting: Roll Cage HP: 5 HP SUCTION: 2" NPT DISCHARGE: 2" NPT L 31" X W 22.5" X H 23.6" Warranty: 1 Year   Product images are a representation only

AMT Pump MSV3-5-1P Multistage Mtr/Pmp 1Hp 115v Multi-Stage Booster Pump – MSV3-5-1P, 5-Stage, 115-208-230 Volts NEMA 56C, Dual Cycle 50 and 60 Hz, 1.0 HP, single phase, Totally Enclosed, Fan Cooled motor Recommended to operate at or below the Best Efficient Point which is at 16 GPM and a Max Total Head of 105 feet Cast Iron base and adapter 1 inch NPT cast iron flanges 304 series stainless steel components with Teflon wear rings EPDM-Tungsten Carbide Seal that is easy to remove and replace The AMT MSV3-5-1P is a non-self-priming/gravity feed, industrial pump with high pressure and low output.  This unit is more commonly referred to as a jockey pump and is often installed for water transfer uses where no suction lift is required such as boiler feed, condensate return, high pressure washdown, irrigation, booster service, and fire protection/sprinkler systems.  These pumps have NOT been investigated for use in drinking water systems.  

Amt 5764-95 Sub Shredder Pump 3" Npt SUBMERSIBLE SHREDDER SEWAGE PUMP   Cast Iron with Stainless Steel Motor Housing Carbide-Tipped Shredder Impellers Spiral Shredder Mechanism Plate Surface Hardened for Enhanced Cutting Ability Silicon Carbide Lower Seal 3" NPT Port Sizes Max. Temperature 104° F  3 HP 230 Volt     AMT Submersible Shredder Sewage pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Also ideal for grinder type solids reduction application. Motors are rated continuous duty and single phase models have thermal overload protection.   AMT Submersible Shredder Sewage Pumps are reliable, cost effective and low maintenance.    

Amt 4294-98 Centrif Pump, 1" Ss, Viton  1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

AMT 4230-97, Coolant Recirculating Pump 1 Phase, 115V, 3/8" NPT Female 3/8" BRONZE COOLANT RECIRCULATING PUMPS   Cast Bronze Construction No Bottom Bearing!!! Brass Column and Impeller Shaft Bronze Self-cleaning Open Impeller 3/8" NPT Discharge Port Maximum Flow 8 GPM Maximum Head 10 ft. Available with 115V AC Single Phase or 230V AC Three Phase Motors,1590 RPM 1/25 HP Totally Enclosed Fan Cooled (TEFC) Motor Delivers up to 8 GPM and 4 PSI   The AMT Bronze Coolant/Recirculating pump has been manufactured for a wide variety of Industrial/Commercial Coolant and Recirculating applications. The absence of a bottom bearing makes the unit ideal for handling erosive liquids. A 36" 3-conductor power cord is included. AMT Bronze Coolant/Recirculating pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast, 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000. • Cast Iron & Stainless Steel Construction • Buna-N Mechanical Seals on Cast Iron Models • Viton® Mechanical Seals on Stainless Steel Models • Optional Silicon Carbide Mechanical Seals Available • 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes • Dual Volute Design Reduces Radial Load on Motors • Maximum Temperature ◆ Buna-N 180° F ◆ Viton® 200° F • Self-Cleaning, Semi-Open Impeller • Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings

AMT 3201-96, Laundry Tray Pump 1/4 HP 115V GENERAL PURPOSE LAUNDRY TRAY PUMP   Cast Aluminum Construction Buna-N Mechanical Seal and O-Ring 1-1/4" NPT Suction and Discharge Port Self-cleaning, Semi-open Impeller Continuous Duty Motor 1725 RPM, 1/4 HP 115VAC Single Phase Open Drip Proof (ODP) 48Z Frame   The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a laundry tray pump but can be used for most gravity fed general service pumping applications. The open impeller design makes it particularly adaptable to dirty as well as clean liquids and is inherently resistant to clogging. The AMT Laundry Tray pump is readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS   Investment Cast 300 Series Stainless Steel Construction Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide 1" NPT Port Sizes Self-priming to 6 ft. ODP and TEFC, Single or 3 phase 56 frame motors Available in 1/3 to 2 Horsepower Delivers up to 66 GPM and 29 PSI   AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability. AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.  

AMT Pump 5760-95 1Hp 2"Npt 115V CI-SS Submersible Shredder Sewage Pump 5760-95, 130 GPM, 1.0 HP, Carbide Tipped Cast Iron construction with stainless steel motor housing 1.0 HP, 14 Amps, 115 volts, continuous duty, single phase electric motor Can handle solids up to 1 inch Triplex seal system 2 inch output port with a discharge rate of 7800 gallons per hour The AMT by Gorman-Rupp 5760-95 is an industrial grade shredder sewage pump that is designed to handle sludge and dirty water applications.  Features an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging when pumping sludge type waste.  Liquid content still must be above 85% to keep from damaging the pump and possibly void the warranty.

AMT 5381-95, Immersion Coolant Pump Cast Iron 10gpm INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   1/8 HP Totally Enclosed Motor (TEFC) Three Phase Motor 230/460 volts, 0.3/0.19 amps Stainless Steel or Composite Semi-open Impeller Options Immersion and Suction Types Cast Iron Construction Handles Viscosity up to 500 SSU Standard Replacement for Machine Tool Industry Delivers up to 10 GPM 3/8 inch outlet diameter   Able to pump liquid down to 2 inches Replacement for to following Standard Machine Tool Industry Pumps  Fuji: VKP-053A Old Fuji: VKN-051A Mitsubishi: NQ-60J Toshiba: OPF-60M Hitachi: CPD-060M Yasukawa: VFPC-061DIF Graymills: IMV-08   Gusher: VBV-18

AMT Pump 2105-016-01 Bronze Casing Am 3890-K7

AMT Pump 4822-95 Rotary Hand Pump AMT Rotary Drum Pump 1" Suction & 3/4" Discharge Buna-N Shaft Seal Includes: Bung Adapter & Suction Tube Included Material: Cast Iron