|
Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner
These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.
Features:
316L stainless steel
1/2 in. threaded drain
Specifications:
Angle: 0-degrees
Length: 9 in.
Inner Diameter: 1-5/8 in.
|
64.73 |
|
|
Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner
These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.
Features:
316L stainless steel
1/2 in. threaded drain
Specifications:
Angle: 30-degrees
Length: 9 in.
Inner Diameter: 1-5/8 in.
|
64.87 |
|
|
Flush Mount Rod Holder - 15 Degree & 9" Depth - Stainless Steel - Cast Gimbal - White Vinyl Liner
These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place.
Features:
Safe, rounded bottom
316L Stainless Steel
1/2" pipe-threaded drain hole
9" tube
Specifications:
Angle: 15-degrees
Inner Diameter: 1-5/8"
Outer Diameter: 2"
Cap (L x W): 4-1/2 x 3-5/8 inches
|
64.87 |
|
|
70 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
Cast models feature a 1/2 in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 0 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-5/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
|
64.87 |
|
|
70 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 0 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-5/8 in.
Outer Diameter: 2-1/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
|
95.28 |
|
|
80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-9/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 0 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-7/8 in.
Outer Diameter: 2-5/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10 in.
|
135.78 |
|
|
80 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
316L stainless steel
Fits 2-1/2 in. hole diameter
Cast models feature a 1/2 in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 0 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-7/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10-1/2 in.
|
108.89 |
|
|
536800S - Flush Mount Rod Holder - 0 Degree - Swivel - 10.5" Deep
The larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance.
They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.
A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile.
Technical Specifications:
Material - 316L Stainless Steel
Angle - 0°
Bottom Style - Swivel
Liner Color - Black
Inner Diameter - 1-7/8"
Tube Length - 10-1/2"
Cap Size (L x W) - 5-1/8" x 4-1/4"
Hole Size - 2-1/2"
*Sold as an Individual
|
128.03 |
|
|
70 Series Standard Flush Mount Rod Holder - 0 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 0 degrees
Bottom Style: Bar
Liner Color: Black
Inner Diameter: 1-5/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
Gimbal Bar: ¼ in. wide x ½ in. tall
|
57.22 |
|
|
80 Series Screwless Flush Mount Rod Holder - 0 Degree - Stainless Steel - Swivel Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-9/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 0 degrees
Bottom Style: Swivel
Liner Color: Black
Inner Diameter: 1-7/8 in.
Outer Diameter: 2-5/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10 in.
|
163.42 |
|
|
Stainless Steel Rod Holders
With 1/2" Pipe Threaded Drain Hole
These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.
They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place
ANGLE:
0°
LENGTH:
10-1/2"
I.D.:
1-7/8"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
108.89 |
|
|
70 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 15 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-5/8 in.
Outer Diameter: 2-1/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
|
95.28 |
|
|
70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 30 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-5/8 in.
Outer Diameter: 2-1/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
|
95.28 |
|
|
80 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-9/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 15 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-7/8 in.
Outer Diameter: 2-5/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10 in.
|
135.78 |
|
|
80 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-9/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 30 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-7/8 in.
Outer Diameter: 2-5/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10 in.
|
135.78 |
|