Bungee Deck Kit Add or replace the bungee system on the deck of a kayak or canoe with the YakGear Deck Kit. Bungees on the deck of a boat add extra storage for more equipment on your adventure. The kit comes with 10 feet of ¼-inch nylon bungee and is equipped with 6 pad eyes and 2 J hooks for deck mounting. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.  Features: Easily replace the deck bungee or add more storage 10 ft. of 1/4 in. nylon bungee, 6 pad eyes, and 2 J hooks included Installation instructions and hardware are included 1-year warranty

Paddle Keeper Kit Add or replace paddle holders with the YakGear Paddle Keeper Kit. While there are many ways to mount and store paddles on kayaks and canoes, bungee paddle keepers are by far the most versatile. A 1/4-inch bungee is mounted with terminal ends and a J-hook to form a pressure-based bungee clamp for paddles, fishing poles, and anchor sticks. This kit comes with two paddle keepers, so the versatility and practicality of the product will not be limited to one side of the kayak or canoe. As always, this complete kit comes with all stainless-steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Paddle keepers can be used to store an assortment of items Made of 1/4-in. nylon bungee, it attaches to a vessel using terminal ends and sleeves Each kit comes with two paddle keepers Installation instructions and hardware are included 1-year warranty

Anchor Cleat Kit The YakGear Anchor Cleat Kit comes with a 4-inch nylon anchor cleat for kayaks, canoes, and small boats. This anchor cleat provides a stable access point to secure anchors, drift chutes, bow lines, and safety lines.  As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included.  Features: Installation instructions and hardware are included 1-year warranty Specifications: Length: 4 inches

Bosworth 34 Thru-Deck Kit For 400/50  

Through Deck Kit for Manual Bilge Pumps Features: Actual Weight: 0.16 Kg  (Approx. 0.36 Kg packed)

Toggle Handle Kit The YakGear Toggle Handles easily attach to a pad eye or deck loop at the bow or stern of your watercraft. Sold as a two-pack Features: Sold as a two-pack Quick and easy replacement for any watercraft 2 toggle handles per pack Black handle with black rope 1-year warranty *HARDWARE NOT INCLUDED

Drip Ring Kit Drip rings help stop the water from flowing down the shaft of the paddle into the boat or lap of the paddler while paddling. Stay dry and paddle on with YakGear Drip Rings. Accommodating two-piece paddles with a shaft circumference of 1-1/4 inch to 1-1/2 inch, the drip rings are placed close to the paddle blades on the shaft of the paddle. Drip ring combinations are sold in quantities of two for placement on the port and starboard sides of one paddle. The paddle must be two pieces for proper installation. Paddle not included.  Features: Sold in quantities of two Drip rings stop water from flowing down the shaft of the paddle Fits paddles ranging from 1-1/4 to 1-1/2 in. in circumference 1-year warranty

Sierra Aqua Vue and metal collection bowl separator filters allow water to be drained from the filter to extend service life. Use the Aqua Vue collection bowl for outboard, above deck installations. USCG regulations require the use of the flame resistant metal collection bowl below deck. Kit contains 2 brass pipe plugs. Display packaged.

Amazon Thrudeck Pump Manual Bilge Pump Features: Connections: – for 25mm (1”) bore hose Dimensions: – 120mm high, 250mm wide, 210mm long with 260mm handle (nominal dimensions for variable pump configuration) Output: – up to 50 litres/minute (11 gallons/minute) Mounts through deck or through the bulkhead Light, compact pump with 16 port position variations Quick-release clamp ring for rapid disassembly Includes through deck kit and cover, with 4 mounting positions relative to the pump Stainless steel handle with bulkhead clips Self-priming up to 4m Packaged Dimensions: L:25.00 x H:16.00 x W:24.00cm Actual Weight: 1.41 Kg  (Approx. 1.91 Kg packed)

Hypro 9910-Kit-1725,Kit   910-KIT1725 Includes:   Qty 2 9910-650085 Diaphragm, Desmopan (Standard)   Qty 4 9910-320030 O-Ring   Qty 1 9910-650520 Air Chamber Diaphragm (Buna)

This is the Major Rebuild Kit that includes the pump shaft.

Jabsco 7420-1001 Kit Kit  

Sherwood P1710X KIT Kit P1710X KIT  

Sherwood P1726X KIT Kit P1726X KIT  

Sherwood P1727X KIT Kit P1727X KIT