1.5lb Grapnel Anchor Kit with Storage Bag Catch the big fish while anchored with the little anchor kit with the complete YakGear 1.5-pound Grapnel Anchor Kit. This 1.5-pound (.7 kg) galvanized steel anchor features four 3.5-inch tines that fold out of the way while stored for space maximization and release when ready for use. While it may seem small, a 1.5 lb. anchor is a more than adequate weight for kayaks and canoes in rivers, lakes, and slower-moving water. Includes 30 feet of 3/16-inch black nylon diamond braid anchor rope and a storage bag.  Features: 1.5 lb. galvanized steel Grapnel Anchor Four folding 3.5 in. tines for easy storage Locks in open or closed position 30 ft. nylon diamond braid rope Storage bag included 1-year warranty Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions

3.3lb Grapnel Anchor Kit with Storage Bag Anchor a kayak, canoe, or small boat worry-free with the YakGear 3.3-pound (1.5kg) Grapnel Anchor Kit. This 3.3-pound (1.5 kg) galvanized steel anchor features four 6-inch tines that fold out of the way while stored for space maximization and release when ready for use. The heavy head design of the anchor creates less wait time until the anchor is fully submerged into the anchoring surface in deeper and faster-moving water. 30 feet of 3/16-inch black nylon anchor rope and a storage ditty bag are included. Features: 3.3 lb. galvanized steel Grapnel Anchor Four folding 6" tines for easy storage Locks in an open or closed position A heavy head allows for easier anchoring 30 ft. nylon diamond braid rope Storage bag included 1-year warranty Note: It is recommended to use 3 times the depth of the water as the length of rope in calm waters and 4-5 times the depth of the water as the length of rope in choppy waters or windy conditions

3.5lb Grapnel Anchor System This 3.5lb anchor will hold your PWC, canoe, dinghy, kayak, or float tube in sand, mud, gravel, and rock. Includes 25' of rope, marker buoy, giant snap hook, anchor and a durable nylon storage case that protects your boat from scratches. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Kayak Grapnel Anchor Kit Grapnel anchor will hold your kayak, PWC, canoe or float tube in mud, sand, gravel and rock. Includes a 3 lb. silver grapnel anchor with 1/4" diameter x 20' of black diamond braided MFP anchor rope and mesh bag with drawstring.

PWC Anchor Kit - 3lb 3 lb Grappling Folding Anchor Features: Includes storage bag For small boats, sailboats, personal watercraft, inflatables, and canoes For sand, rock, mud, and gravel bottoms Easy to deploy or stow away

Anchor Kit 797 50' Premium Nylon Line 1.5lb Folding Anchor Watertight Buoyant Container - doubles as a bailer Nylon Snap Hook, for easy attachment to vessel For still water use. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Goulds 16Bfk1 - 5 1/8 Kit W/ 5 1/8 Trim  

Yamada K25-MS-1 Wet End Repair Kit Repair Kit For NDP-25BAS, BFS, BSS, BAS-PP, BFS-PP, and BSS-PP contains the following parts. (2) 771974 Diaphragm 25TPO  (4) 773171 Ball 25TPO  (4) 683997 0 Ring  (2) 683996 0 Ring (2) 640154 0 Ring

Kayak Angler Starter Crate Kit Milk crates provide interior storage areas on the deck of kayaks, canoes, or paddleboards. It is a simple solution to an ever-persistent problem in a sport plagued by a lack of storage space. The YakGear Black Milk Crate comes with the YakGear logo in a standard 13 in. x 13 in. milk crate size, fitting most kayak tank wells or decks. Having milk crates for sale also prevents kayak anglers from being forced to steal beverage distributor crates from stores or shell out major cash on a glorified milk crate storage system. The crates are honeycomb-designed to allow customization with all YakGear crate rigging accessories, including the Build A Crate Series of accessories. In addition, this kit comes with 2 x Build A Crate single rod holders and 1 x YakGear accessory pouch. About the Accessory Pouch The YakGear Accessory Pouch is an easily installed storage pouch that allows storage, protection, and organization for paddling and fishing accessories while on the water. The storage pouch is designed to secure tackle trays, extra lines, pliers, fish grips, and other accessories while keeping them organized at the same time. The 7-inch tall x 12-inch wide gear storage pouch will hold up to a 9-inch x 11-inch tackle box and other accessories up to 11 inches in width or 9 inches in height. The adjustable top elastic strap combined with the side elastic web strap provides the flexibility necessary to accommodate accessories of varying sizes while maintaining a snug grasp. This gear storage pouch can be mounted anywhere that it is needed, including on a milk crate, the side of a cooler, or on the inside gunwales of the kayak or canoe, for needed extra storage. The accessory pouch comes complete with stainless steel installation hardware, installation instructions, and rigging tips from YakGear. About the Build a Crate Single Rod Holders: Milk crates, buckets, and coolers provide interior storage areas on the deck of a kayak, canoe, or paddleboard; however, these storage methods do not have any exterior storage or rod holder features.   Rig the exterior of a preferred storage area with the YakGear Build A Crate Kits to fully maximize all storage possibilities. This single rod holder kit provides any paddler with a rod or anchor holder that easily attaches to any storage container with inside access. This allows the paddler to efficiently take advantage of storage space in a sport where extra gear is at a premium and free space is hard to find. The rod holder is 12 inches long and features trigger cutouts to properly rest and secure reels. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Included: 1 x YakGear Black Milk Crate 1 x YakGear Accessory Pouch 2 x YakGear Build A Crate Single Rod Holders Features: 1-year warranty

5lb Mushroom Anchor The YakGear 5-pound Mushroom Anchor is perfect for anchoring kayaks, canoes, stand-up paddleboards, and even jon boats in muddy, sandy, or weeded bottoms. The high-level holding strength provides additional security with a wide-area mushroom cap with drains in the base. Shaped like an inverted mushroom, the head becomes buried in the soft seabed and will normally sink to the point where it has displaced its own weight in the seabed material. Its one-piece cast iron construction combined with a tough vinyl coating ensures long-lasting, dependable use. The anchor is very popular for fishermen and race buoys. Features: 5 lb. inverted mushroom-shaped anchor Cast iron and vinyl coated in black 1-year warranty

Deluxe Anchor Trolley with Pulleys The Deluxe Anchor Trolley will help users stop being victims of changing winds and currents while fishing in an anchored position. The YakGear Deluxe Anchor Trolley Kit allows the deployment of any anchor, drift chute, or stake-out pole before judging the current and wind while still remaining in a favorable fishing position. Without a trolley, users are limited to anchoring where it is reachable, causing the boat to swing back and forth. Mounted just off of the gunwale of any kayak or canoe, the deluxe trolley kit uses a nylon pulley system to select a desirable position anywhere from bow to stern, then maintains the positioning through the use of a 2-5/16-inch mini zig-zag cleat. The deluxe system uses Harken pulleys to seamlessly pass trolley rope from bow to stern without the standard rubbing of rope along slightly less smooth pad eyes. The mounted pulleys are raised off of the boat enough to eliminate any unnecessary rubbing or scratching of the boat.  As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone and anchors are recommended but not included. Features: Deluxe anchor trolley system with Harken pulleys It allows the bow of your vessel to turn into the current for a smoother experience A mini zig-zag cleat is included, assisting in maintaining stable positioning Installation instructions and hardware are included The kit also includes 30 ft. of rope 1-year warranty

Molded Paddle/Pole Clip Kit - 1-1/4" Clips  Add or replace paddle holders with the YakGear Molded Paddle Clip Kit. While there are many different ways to mount and store paddles on kayaks and canoes, molded rubber pole clips are by far the strongest and most reliable. With solid rubber construction, the molded clips promote the strength of a continued locking effect while in use. The 1-1/4 in. design fits most paddles and push-poles, ranging in circumference from 1-1/4 inch to 1-1/2 inch. This kit includes two molded rubber paddle clips, intended for combined, linear use on one paddle or mud anchor. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from YakGear. Waterproof silicone is recommended but not included. Features: Molded rubber paddle clips allow for easy paddle or mud anchor storage Two solid rubber-molded paddle clips are provided 1-1/4 clips fit paddles with a circumference ranging from 1-1/4 to 1-1/2 in. Installation instructions and hardware are included 1-year warranty Specifications: Size: 1-1/4 in. clips

Kayak Anchor Kit - 1.5lb 1.5 lb Grappling folding anchor Features: Includes 30' of 3/16" nylon anchor line Includes  1/4" Anchor Shackle Exceptional 4-fluke holding power Easy to deploy or stow away

Kite Kit - 2-All Purpose Yellow, 2-Specialty White & Storage Bag All Purpose Kite - Yellow Features: The All Purpose Kite will exceed all of your expectations and fly steady in 10-15 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds.  Lightweight spars are constructed of 100% carbon graphite. Includes extra 5th spar Specialty Lite Wind Kite - White Features: The All Purpose Kite will exceed all of your expectations and fly steady in 5-10 mph winds with a simple adjustment to the bridle, eliminating the need to use different kites for different winds.  Lightweight spars are constructed of 100% carbon graphite. Includes extra 5th spar Kite Storage Bag Features: Lightweight and waterproof 4 Velcro straps on back to easily secure to your boat Keeps your kites dry and in good condition Easy access to your assembled kites

Quad Pod Stand Padded Storage Bag  Conveniently store and transport your mount in Magma's luggage quality Padded Storage and Carrying Case that is designed to store the Quad Pod Mount.  Constructed from heavy duty polyester nylon, this case has thick internal padding for maximum protection, reinforced stitching, heavy duty zippers, convenient carrying handles, and shoulder strap.  Compatible With: Quad Pod Stand *Sold as an Individual