316 Stainless Steel Antenna Rail Mount - 1" - 1-1/4" Rails The Seaview 316 S.S. Rail Mount is designed to fit 1", 1-1/8” and 1-¼” rails and is for mounting GPS, weather, or VHF antennas. The unique two-piece design clamps to a rail and keeps wiring completely hidden inside the mount and railing. The 1"-14 threads accept the most common GPS or VHF antennas. Cast of solid 316 stainless steel with rubber bushings.

320 Adaptable Rail Mount for 2" Rail Features: The 320 rail mount adaptor can be positioned almost anywhere along a 2″ rail Includes a pair of inserts for both 1½” round rails, and the 1¼” square rails Stainless Steel fasteners included Also includes the 241 Side Deck Mount Ideal for Pontoon Boats

316 Stainless Steel T-Bolt Clamp 3/4" Band - Range 8.25" to 8.69" Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation. These clamps can be used on any hose connection with peace of mind that they will last you a very long time. These clamps are sold in 2 configurations; part numbers ending in “L” signify that a long T-Bolt is being used and is for our Rubber Hose products. The part number without the “L” is for our Silicone and PVC products. 3-Year Warranty.

316 Stainless Steel T-Bolt Clamp 3/4" Band - Range 8.25" to 8.69" *10-Count Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4″ (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation. These clamps can be used on any hose connection with peace of mind that they will last you a very long time. These clamps are sold in 2 configurations; part numbers ending in “L” signify that a long T-Bolt is being used and is for our Rubber Hose products. The part number without the “L” is for our Silicone and PVC products. 3-Year Warranty.

316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets. Features: Straight Vent Specifications: Hose Size (inch): 5/8" inner diameter Maximum Hull Thickness (inch): 7/8" Installation Hole Size (inch): 1-3/8" *Includes two silicone gaskets

316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets. Features: 90-degree vent Specifications: Hose Size (inch): 5/8" inner diameter Maximum Hull Thickness (inch): 7/8" Installation Hole Size (inch): 1-3/8" *Includes two silicone gaskets

Stainless Steel Drain Cover - 3-1/4"  Stamped 304 Stainless Steel

Stainless Steel Deck Step 2-1/4" x 8-3/8" Injection Molded Rubber/Stamped 304 Stainless Steel These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.  

Stainless Steel Deck Step 3-1/4" x 8-3/8" Injection Molded Rubber/Stamped 304 Stainless Steel These Deck Steps are lined with injection molded rubber to facilitate traction. Constructed of corrosion resistant stamped 304 stainless steel.

Hand Rail Tee 316 Stainless Steel 90° - 7/8" These Hand Rail Tee fittings create directionality in hand rail applications. Includes set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. *Stainless tubing with a wall thickness of 0.049”.

Top Support Bracket - Rail Mount 1" Rail - 2-3/8" Mast With Edson's Rail Support Bracket for 2-3/8" Standard Radar Mast - 1-inch Railing is designed to give any Edson 2-3/8” Radar Pole more support, comes complete with two Stainless Steel U-Bolts and two Starboard Rail Mount Brackets to provide a secure, rattle-free installation. Must be mounted within 1” of the railing. This Surface Mount gives you the ability to support the mast against a bulkhead, cabin side or vertical transom.

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" OD These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”. Features: Investment Cast 316 Stainless Steel  30° Rectangular Base 1" Tube OD Base: 1-7/8" x 3-3/16" Fastener: 1/4" FH

RAM 1.5" Rail Mount with Double U-Bolt Base & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-334-1U consists of a double socket arm, 3.625" square base with the VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 0.75" to 1" in diameter. The VESA base contains a 75mm X 75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. U-Bolt Dimensions: Accommodates rails from 0.75" to 1" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern) The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Smart Cleat 6" Deck Mount Investment Cast 316 Stainless Steel The Smart Cleat provides easy line tie-off in a classic style. Knob end prevents lines from easily slipping off and minimizes potential collision injuries. Constructed of corrosion resistant investment cast 316 stainless steel. Open base mount cleats install with four 1/4" FH fasteners (not included).