|
Freeze Spray 3.5oz Can
An economical, general-purpose freeze spray with a wide spray for cooling to test the functionality of the heater just sprays on the test area of your heater to turn it on.
To test the functionality of the heater, just spray the test area of your heater to turn it on.
The economical, general-purpose freeze spray with a wide spray for cooling. We recommend testing upon installation and then 4 times a year.
Features:
Rapidly cool an area to –60°F/–51°C
Wide spray for cooling large areas immediately
Safe on plastics
Non-flammable
CFC/HCFC free & ozone-safe
Specifications:
Weight: 1 lb.
Dimensions: 7 × 2.5 × 2.5 in.
|
11.51 |
|
|
keywords: Xtreme heaters, boat heater, marine heater, engine heater, heater
|
|
|
Quick Release Bracket for 450W & 600W Heaters
Install and Remove your Xtreme Heater FAST!
Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools.
Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space.
For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in!
Features:
Built Xtreme Tough, anodized aluminum construction will not corrode
Provides easy off-season storage, for quick access to engine spaces
Works on ALL Xtreme Heaters built after 2004
Quickly Install and Remove your Heater Without Tools!
One Year Warranty
|
47.68 |
|
|
Quick Release Bracket for 300W Heater
Install and Remove your Xtreme Heater FAST!
Driven by customer demand, our quick-release bracket was designed specifically for your Xtreme heater and allows you to easily install and remove your heater(s) in seconds, without the need for tools.
Using this bracket, your mounting options include locations you may not have considered due to concern for blocked access to other components in your tight engine space.
For our customers who prefer to leave their heater(s) in place only during the winter months, THIS is the accessory you've been asking for. The quick-release bracket makes it simple to remove the heater for the boating season, leaving just the low-profile bracket installed and ready to go. When winter returns, lock it down, and plug it in!
Features:
Built Xtreme Tough, anodized aluminum construction will not corrode
Provides easy off-season storage, for quick access to engine spaces
Works on ALL Xtreme Heaters built after 2004
Quickly Install and Remove your Heater Without Tools!
One Year Warranty
|
46.03 |
|
|
Xtreme Heater
Xtreme Heater is the must have accessory for the serious boater who wants to enjoy their boat year-round. Don't spend time and money to winterize your boat and miss out on enjoying your boat during the fall and winter months. Don't let the small size fool you, our bilge heaters generate more heat than any other boat heater on the market in a shorter time period. Less run time saves you money.
|
|
|
Boat, Cabin, & RV Heater
This Xtreme boat and cabin heater is designed to help keep your boat cabin, RV, or other small space comfortable during the fall and winter months.
This heater features quiet operation, a low profile, and a stable base that prevents tipping. Drawing air from the top, this heater can be placed up against walls or on carpeted surfaces without blocking the air intake. The 1500-watt heat setting will quickly warm your living space, while the 750-watt setting will efficiently maintain comfortable temperatures. The 6 ft. power cord offers more flexibility for heater placement independent of outlet locations.
Features:
Built-in overheat protection
"One Shot" secondary overheat protection
Two heat settings: 750/1500 and 1500 watts
Freeze prevention thermostat setting
Fan-only setting
Automatic thermostat
6 ft. power cord
UL Listed to UL 1278 standards
Specifications:
Color: White/black
Wattage: Low: 750 / High: 1500
Amps: Low: 6.25 / High: 12.5
Voltage: 120V
Dimensions (inch): 10″ L x 10-1/4" W x 4-3/4" H
Cord Length: 6 ft.
Weight: 5lbs
|
126.06 |
|
|
Small 400W XHEAT Boat Bilge & RV Heater
This Xtreme boat bilge and RV heater is suitable for boats up to 24' in length and small RV compartments.
Features:
True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control
The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available
Failsafe Design cannot overheat (heating technology is dynamic and self-regulating)
High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier
A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation
Designed for durability and reliability
Complete protection (fully anodized inside and out)
Small footprint
Certified and independently tested now with the UL 1278 standard
Specifications:
Wattage: 400W
BTU: 1365
Inrush (startup) Current: 8.2 A, 1 sec.
Typical Operating Current: 4. A
Fan Flow: 40CFM
Heater Dimensions (inch): 5.75″ x 3.5″ x 5-1/8″
Fuse Size Required: 15A
Power Cord: 15 ft. marine-rated power cord
|
328.57 |
|
|
Large 800W XXXHEAT Boat Bilge & RV Heater
This Xtreme boat bilge and RV heater is suitable for boats up to 35' in length and medium RV compartments.
Features:
True forced air heating circulates air more effectively and heats it more evenly for more accurate climate control
The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available
Failsafe Design cannot overheat (heating technology is dynamic and self-regulating)
High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier
A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation
Designed for durability and reliability
Complete protection (fully anodized inside and out)
Small footprint
Certified and independently tested now with the UL 1278 standard
Specifications:
Wattage: 800W
BTU: 2729.7
Inrush (startup) Current: 14A, 1 sec.
Typical Operating Current: 6.5A
Fan Flow: 40 CFM
Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″
Fuse Size Required: 20A
Power Cord: 15 ft. marine-rated power cord
|
421.43 |
|
|
Medium 600W XXHEAT Boat Bilge & RV Heater
This Xtreme boat bilge and RV heater suit boats up to 28' in length and medium RV compartments.
Features:
Accurate forced air heating circulates air more effectively and heats it more evenly for more accurate climate control
The automatic thermostat turns the heater on at 40°F and off at 55°F +/-3° - the tightest tolerance available
Failsafe Design cannot overheat (heating technology is dynamic and automated)
High Efficiency Xtreme produces heat faster, circulates more air, and shuts off earlier
A pre-wired 15 ft. marine-rated power cord with a 110V 3 prong plug eases installation
Designed for durability and reliability
Complete protection (fully anodized inside and out)
Small footprint
Certified and independently tested now with the UL 1278 standard
Specifications:
Wattage: 600W
BTU: 2047.3
Inrush (startup) Current: 12A 1 sec.
Typical Operating Current: 5.5 A
Fan Flow: 40 CFM
Heater Dimensions (inch): 8″ x 3.5″ x 5-1/8″
Fuse Size Required: 15A
Power Cord: 15 ft. marine-rated power cord
|
375.06 |
|
|
Marine Shore Power Adapter Pigtail L5-30P Male to 5-15R Female
Pigtail shore power 30A to 15A dogbone adapter power cord twist lock L5-30P male to 5-15R female with an LED indicator.
Heavy Duty Over Molded Construction:
Custom grip for comfort
Marine quality
5-year warranty
Led indicator
Female Connector:
15/250A 125V straight blade
Attaches to a cordset or boat inlet
Male Plug:
30A 125V locking
Attaches to dockside receptacle/cordset
Specifications:
Weight: 1.6 lbs
Dimensions: 12 × 6 × 3 in.
|
32.88 |
|
|
3 Gallon Hot Water Heater - White Epoxy - 12V - 1500W
Whale Electric Water Heaters includes models with the very latest technology. All heaters are manufactured from only highest quality materials and designed to specifically withstand harsh marine conditions
Whale's 11 ltr (3 US Gal) heaters are the lightest water heater at 14 lbs, saving weight on board. The white epoxy coating blends in well with existing equipment and the coated aluminium material offers corrosion resistance and weight saving.
Features and Benefits
Side mounted combination electric/heat exchanger
Robust Manufacturing
Hold down brackets welded to inner tank
Double wall heat exchangers
Integrated pressure relief valve
Temperature and pressure drain tube included
Sturdy, robust epoxy coated exterior
Ignition protected
Magnesium anodes available separately*
*Recommended to prevent corrosion and ensure a longer water heater life
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
722.09 |
|
|
Gear Grease - 3.5oz
A plastic tube of waterproof grease for use in many applications.
Features:
Perfect for routine service and maintenance
Aids the load-carrying characteristic of a winch
*Sold as an Individual
|
22.02 |
|
|
Aerating Heads
2 Piece Assembly:
8" spray bar with 3/4" barb
6" shut off assembly with 3/4" barb and 3/4"
Thru-Hull
Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.
|
44.89 |
|
|
Aerator Head - 9-3/4" Spray Bar with Shut Off Valve
Overall length 9-3/4", 3/4" thru-hull, one shut off valve
Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.
|
24.68 |
|
|
Aerator Head
Overall length 10-1/2", 3/4" barb, shut off valve w/bracket
Spray head assemblies can be custom made to required fit, size and flow capacity. A variety of shapes, configuration and options allow us to build these aerating heads to your specifications.
|
24.30 |
|