2.0 - 4.3" Monitor with Camera - Wireless The WVSXS43 single-camera system includes a 4.3-inch wireless LCD monitor, a wireless rear camera, a 12-volt accessory plug, a suction cup monitor mount, a non-corrosive camera mounting bracket, and stainless-steel hardware. WiSight® 2.0 technology digitally locks the camera to the monitor and blocks all outside signals. This eliminates interference and noise typical of analog wireless systems and delivers a sharp, vivid picture of the vehicle’s surroundings to the monitor. Monitor (WVSXM43) Features: Supports up to four (4) wireless cameras simultaneously Auto-Pairing capability allows the monitor to be paired with any of the wireless cameras with the touch of a button A strong signal transmits through and around objects up to 60 feet away Bright 4.3" display Supports normal and mirrored camera image Displays a graphic overlay that shows the real-time distance from objects Built-in speaker Suction cup mount and 12V DC plug included Camera (WVSXC160) Features: 12VDC power High-performance color optics CMOS Sensor technology IR LED Low-light assist Waterproof Integrated microphone Wide viewing angle Non-corrosive camera mounting bracket Stainless steel hardware             

WiSight 2.0 - 4.3" Monitor with Camera for Prewire System - Wireless The WVSXP43 single-camera system includes a 4.3-inch wireless LCD monitor, one wireless rear camera, a 12-volt power cord, and a suction cup mount. WiSight® 2.0 technology digitally locks the camera to the monitor and blocks all outside signals. This eliminates interference and noise typical of analog wireless systems and delivers a sharp, vivid picture of the vehicle’s surroundings to the monitor. Monitor (WVSXM43) Features: Supports up to four (4) wireless cameras simultaneously Auto-Pairing capability allows the monitor to be paired with any of the wireless cameras with the touch of a button A strong signal transmits through and around objects up to 60 feet away Bright 4.3" display Supports normal and mirrored camera image Displays a graphic overlay that shows the real-time distance from objects Built-in speaker Suction cup mount and 12V DC plug included Camera (WVSXC150) Features: 12VDC power High-performance color optics CMOS Sensor technology IR LED Low-light assist Waterproof Integrated microphone Wide viewing angle

WiSight 2.0 - 7" Monitor with Camera - Wireless The WVSXS70 single-camera system includes a 7-inch wireless LCD monitor, a wireless rear camera, a 12-volt accessory plug, a suction cup monitor mount, a non-corrosive camera mounting bracket, and stainless steel hardware. WiSight® 2.0 technology digitally locks the camera to the monitor and blocks all outside signals. This eliminates interference and noise typical of analog wireless systems and delivers a sharp, vivid picture of the vehicle’s surroundings to the monitor. Monitor (WVSXM70) Features: Supports up to four (4) wireless cameras simultaneously Auto-Pairing capability allows the monitor to be paired with any of the wireless cameras with the touch of a button A strong signal transmits through and around objects up to 60 feet away Bright 7" display Supports normal and mirrored camera image Supports single, split, and quad-view camera views Built-in speaker Suction cup mount and 12V DC plug included Camera (WVSXC150) Features: 12VDC power High-performance color optics CMOS sensor technology IR LED Low-light assist Waterproof Integrated microphone Wide viewing angle Non-corrosive camera mounting bracket Stainless steel hardware

WiSight 2.0 - 7" Monitor with Camera for Prewire Systems - Wireless  The WVSXP70 single-camera system includes a 7-inch wireless LCD monitor, a wireless rear camera, a 12-volt accessory plug, and a suction cup monitor mount. WiSight® 2.0 technology digitally locks the camera to the monitor and blocks all outside signals. This eliminates interference and noise typical of analog wireless systems and delivers a sharp, vivid picture of the vehicle’s surroundings to the monitor. Monitor (WVSXM70) Features: Supports up to four (4) wireless cameras simultaneously Auto-Pairing capability allows the monitor to be paired with any of the wireless cameras with the touch of a button The strong signal transmits through and around objects up to 60 feet away Bright 7" display Supports normal and mirrored camera image Supports single, split, and quad-view camera views Built-in speaker Suction cup mount and 12V DC plug included Camera (WVSXC160) Features: 12VDC power High-performance color optics CMOS Sensor technology IR LED Low-light assist Waterproof Integrated microphone Wide viewing angle

Tinned Lug 2/0 AWG - 3/8" Stud Size - 2 Pack Lugs are connection points that are created by crimping the connector onto a wire or cable. This connection, commonly referred to as a cold weld, creates a solid, long-lasting connection. Pacer lugs are made from 100% pure copper for high conductivity. This copper is fully annealed to prevent cracking while being crimped and while in service. These terminals are also tin-plated to prevent corrosion and many of these lugs are general-purpose seamless electrical terminals. They are commonly used with battery cables. Features: Tin-plated copper with no exposed seams offering 100% long-term conductivity Tinned copper Highly durable Multitude of sizes Easily terminated Infield applications Long-lasting Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 Copper RoHS Compliant CSA Approved UL Approved Specifications: Wire AWG: 2/0 AWG Stud Size: 3/8" Length (inch): 2.063" Width (inch): 0.813" Clearance (inch): 0.500" Package Size: Two included

RAM 2" x 4" Rectangle Base w/1" Ball The RAM-B-202U-24 contains a 1" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

March 0156-0004-0300-4.187 Imp W/Mica Teflon Bsg 4.187

SC33 Compact Dome Satellite Compass, NMEA2000 (0.4° Heading Accuracy) with 6M Cable Sleek, Fast & Accurate The SC33 Satellite Compass provides highly accurate attitude information for navigation equipment such as Radar, Plotter, Autopilot, Fish Finder and Sonar. With its compact GNSS antenna and built-in processor, it can be used for a wide variety of applications on any type of vessel. This all-in-one system delivers incredibly accurate heading and roll & pitch information as well as heaving information, GPS position, SOG (Speed Over Ground), COG (Course Over Ground) and ROT (Rate Of Turn) data. Employing a two-antenna system with a 3-axis gyro and acceleration sensors, the SC33 enables high-speed response capability. Advanced digital signal processing techniques compute accurate heading based on sensor data. NMEA2000 interface is standard for simple installation, while the optional interface unit IF-NMEASC is available for conventional NMEA0183, AD10 and contact closure. The GNSS antenna and advanced parallel signal processing allows the SC33 to achieve more precise Pitch, Roll and Heading measurement than conventional models, providing enhanced performance for all of your connected equipment. Its Micro-C pigtail NMEA2000 cable provides flexibility to run cables in challenging areas. Revolutionary 2-Antenna & Rate Sensor System In order to calculate roll & pitch data, a satellite compass requires two vectors. The SC33 employs a dual GNSS antenna system that calculates a single vector while a 3-axis rate gyro and acceleration sensors add the 2nd vector. This configuration enables the SC33 to calculate highly accurate roll and pitch data without using a third sensor. Features: Highly Accurate Two Antenna Satellite Compass & Rate Sensor System More resistant to multi-path, shock & vibration, compared to previous models Improved time to first fix (TTFF) = 60 seconds (typical) NMEA2000 Certified Interface/NMEA0183 Interface with IF-NMEASC (Optional) Accuracy: ±0.4° RMS (Heading/Roll/Pitch) Position Accuracy: 5.0M (GPS); 3.0M (GPS + SBAS) Integrated Rate Sensors provide Pitch, Roll and Heave Compensation 6 Meter Micro-C Male/Female NMEA2000 Drop Cable (Standard Supply) Pigtail cable w/NMEA2000 connector for convenient connection to drop cable Tri-axis speed & direction via PGN 130578 & "Heartbeat" PGN output SC33 menu access with NavPilot 300 & TZtouch2 (with impending software update) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

March 893-10-1/4" 24V Pump W/ 1286-0002-0100

March 0150-0125-0200-2.582 Imp Mag Assy W/2.582 Trim  

RAM 2" x 4" Rectangle Base with 1.5" Ball The RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1/4"-20 x 2 1/4" Threaded Stud with 1" Ball The RAM-B-273U consists of a 1/4-20 threaded stainless steel bolt with 1 inch diameter ball. The threaded bolt is 2.5 inches long. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

March 0155-0159-0500-2.75 Imp Mag Assy W/Ryton Bushin

Description: Plate: 3/4" x 3" Stock: 1/2" Eye Ring Diameter: 1-1/2" Thread Length: 4-3/4"

RAM 1" Diameter Ball with 1/4-20 Stud for Cameras, Video & Camcorders The RAP-B-366U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Compatible Cameras: Contour GPS Contour HD Gobandit GPS-HD GoPro HD Helmet HERO GoPro HD Motorsports HERO GoPro HD Surf HERO GoPro Helmet HERO Wide GoPro Motorsports HERO GoPro Motorsports HERO Wide GoPro RC HERO GoPro Surf Hero GoPro Wide HERO Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.