HF Automatic Antenna Tuner Tune in your HF marine world Suitable for many vessels The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range. Automatic tuning No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band. The AT-130 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations. Weather resistant The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base. For Icom HF marine transceivers Icom's sophisticated AT-130 easily matches Icom HF marine transceivers. The AT-130 easily interconnects with an Icom HF marine transceiver. AT-130 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go! Quick tune-up Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-130 has 8 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1.5 seconds. This allows you quick trouble-free frequency changes. Low power tune-up The AT-130 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency. Specifications Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included) Weight: 2.7 kg; 6.0 lb Usable Temperature Range: -30C ~ +60C Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver) Current Drain (at 13.6 V DC): 2 A Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer) Input Impedance: 50 ohms (unbalanced) Max. Input Power: 150 W (PEP) Input Power During Tuning: 10 W Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed) Auto Tuning Accuracy: VSWR 2.0:1 Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)

Tuner for M802 & M803 When connected to the M802 or M803, the AT-140 automatically bypasses e-mail and shortwave listening, the AT-140 allows use of the entire antenna for best reception. Get fast frequency access without missing communication opportunities! The AT-140 comes ready for simple antenna cable and power connections. Install the unit near the antenna element base. Features: Completely weather-resistant acrylic case with rubber gaskets 45 memories for shorter tuning times Quick Low power tune-up Pre-wired cable connection points, just plug and play Dimensions: 230 (w) x 340 (H) x 80 (D) mm Antenna connector: SO-239 Max. Input Power: 150 W (PEP) 100 W (continuous) Automatic tuning time: Approx 2-3 seconds

2-Piece Antenna Collar f/1.5" Antennas Replace your Rupp antenna collar without removing your antenna! Made of high-impact Delrin, these 2-piece clamp-on antenna collars are perfect for new or existing installations. Only available for antennas with a diameter of 1.50".

APT-F-150-01 Aluminum PowerTower® Radar Mount - 6" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - Quantum (Q24C), Quantum 2 (Q24D) radars Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars Sitex - RADARpc 3.5/4.5 radars Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 5.91" (150mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

APT-F-250-01 Aluminum PowerTower® Radar Mount - 10" Forward Leaning The Scanstrut Aluminum PowerTower is engineered for outstanding strength and with an unparalleled surface finish.  Manufactured using the best marine grade Aluminium, PowerTower® is molded as a single 'monocoque' structure with no joints, offering unparalleled strength and durability. Designed to install your radar on the roof, T-top, flybridge, or radar arch of your powerboat, providing the clearest view of the horizon allowing you to get the best performance from your radar in all conditions.  By elevating your antenna clear of obstructions, PowerTower® maximizes the performance of your radar. There is a PowerTower® to fit pretty much every modern radar. Compatible with: B & G - HALO 20, 20+, 24 radars Garmin - Fantom 18, 24, GMR18HD, GMR18xHD, GMR24HD, GMR24xHD, GMR40 radars Humminbird - HB 2124 CHIRP radar KVH - TracPhone V3-HTS, TracVision M2, M3, TV3, V3 radars Lowrance - 3G/4G radars Raymarine - Quantum (Q24C), Quantum 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars Simrad - 3G/4G, DX45, DX60, DX54-S, GB40, NX40, NSE 8/12 radars Sitex - RADARpc 4D radar Features: Designed to fit the most up to date radars Pre-drilled mounting holes allow the radar to fasten straight to the PowerTower® No need to cut the radar’s connectors off for installation  Constructed from the best Marine grade Aluminium A range of accessories light bars can be bolted to the back of the PowerTower® Technical Specifications: Radar Type - Dome Material - Aluminium Height - 9.84" (250mm) Mounting Type - Forward leaning - 33° In the Box: Mount Mounting hardware (excluding screws/bolts)  Installation manual *Sold as an Individual

APT-F-LB-01 PowerTower® Center Mounted Light Bar for Forward Leaning Radar Mounts Central light bar for all forward learning PowerTowers® Compatible with: Scanstrut forward leaning PowerTower® radar mounts Features: All mounting holes are predrilled for easy retrofit installation, attach using mounting bolts, no extra fastenings required Cables run internally via a watertight seal Technical Specifications: Material - 316 Stainless Steel Height - 25.4" (404mm) Mount Position - Center In the Box: Light bar Instruction manual *Sold as an Individual

THIS PRODUCT MUST SHIP TRUCK FREIGHT AND DOES NOT QUALIFY FOR ANY SHIPPING PROMOTIONS Shakespeare Style 390 SSB 23' LENGTH WHIP ANTENNA WITH CONDUCTORS RUNNING FULL-LENGTH (NO LOADING COIL) This award-winning performer is often referred to as "the standard of the industry" by virtue of its capabilities and popularity. Reinforced insulating qualities allow input power up to 1 kw. Conductors are permanently sealed in Shakespeare white fiberglass. Chrome-plated brass ferrules, bottom ferrule has 1"-14 thread Side feed termination band Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit for deck or side mounting Two sections: Base 162"; Tip 112" Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: 2-30 MHz HF band with tuner Bandwidth: Resonant frequency 10.8 MHz SWR: N/A Impedance: (Ohms): N/A Gain: N/A Max Input (Watts): 1000 DC Ground: N/A Termination: Side Termination Height (feet): 23 Polarization: Vertical Radiation pattern: Omni-directional

Shakespeare Style 393 SSB 23' LENGTH WHIP ANTENNA WITH CONDUCTORS RUNNING FULL-LENGTH (NO LOADING COIL) The Style 393 antenna is electrically the same as the industry standard Style 390, For use in calm to moderate seas. Chrome-plated brass ferrules, bottom ferrule has 1"-14 thread Side feed termination band Suggested mount: Shakespeare Style 409-R or 410-R Mounting Kit for deck or side mounting Three sections: Base 92"; Center 92"; Tip 92" Shakespeare Limited Warranty: 2 years Technical Specifications: Frequency: 2-30 MHz HF band with tuner Bandwidth: Resonant frequency 10.8 MHz SWR: N/A Impedance: (Ohms): N/A Gain: N/A Max Input (Watts): 1000 DC Ground: N/A Termination: Side Termination Height (feet): 23 Polarization: Vertical Radiation pattern: Omni-directional

Replacement VHF Antenna VHF Flexible (Whip) Antenna (146-174 Mhz) Height: 6" Works with most Icom VHF two way radios

GPS Antenna Replacement for MA-510TR The GPS receiver with the SBAS function is integrated into the MA-510TR. Position information can be simply received with a connection to this GPS antenna. Features: Supplied with a 32.8' (10M) cable

Lithium Battery Pack Features: High Capacity Lithium battery pack Non-rechargeable 9.0V/3300 mAh Made specifically for Icom's GM1600 and GM1600K

UX251 AIS Receiver Unit for M605 Icom's UX251 AIS Receiver Unit is already installed, depending on the version.

Compact Waterproof Speaker Mic for M85 Features: Compact size mic with speaker and waterproof feature No audio accessory jack Long coiled cord Durable 14-pin radio plug Lightweight, comfortable and non slippery housing Fully compatible with Icom's M85 marine handheld two-way radio

BP-291 Battery Case for M85 5 x AA Features: Holds 5 AA Batteries IP54 RAted For Icom M85

HM184H Waterproof Speaker Mic for M85 Features: Waterproof Remote Speaker Microphone 14-Pin Large PTT Button Compatible with Icom's M85