|
1" Bolt Down Block
The 25mm plain bearing block range is one of SeaSure's oldest and best-selling ranges. The range uses marine-grade stainless steel side plates and rivets with an arnite (plastic) sheave, which is incredibly hard-wearing and light.
Features:
This range could be used to create purchase systems for lifting, garage door mechanisms, storage solutions, etc.
Specifications:
Fixing Holes: 5mm Dia.
Max Rope: 8mm
Breaking Load: 500kg
|
12.14 |
|
|
MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.
Features:
Carded blister packaging for simple retail display
Compatible with MIDI bolt-down fuses up to 200A (sold separately)
The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
Slots molded into the base enable secure tie-wrap mounting
Zinc-plated steel M5 studs and hex nuts
Bolt-down fuse holder base features M4 mounting holes
UL 94 V-0 flammability rating
Applications:
Battery and alternator Connections
*Fuses not included
|
8.16 |
|
|
MEGA Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 500 Amps
The MEGA Flex Series 32V Bolt-Down Fuse Holder makes it simple to install high-amp fusing thanks to its flexible cover. The UL 94 V-0 rated cover features 6 different positions for cable entry, plus its flexibility accommodates large wire sizes and ring terminal stack up. Designed for MEGA fuses up to 500 amps, this bolt-down fuse holder also has a dovetail feature on the sides that allows you to connect multiple MEGA Flex Series fuse holders to create a fused high-power distribution block. This fuse holder (02981028-BP) includes stainless steel M8 studs, hex nuts, and split washers.
Features:
Blister packaging promotes the easy retail display
Compatible with MEGA high-current bolt-down fuses up to 500 amps
Black or red flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
The dovetailing feature lets you connect multiple MEGA Flex Series fuse holders together to create a fused high-power distribution block (busbars for multi-fuse applications are sold separately)
Slots molded into the base enable secure tie-wrap mounting
Bolt-down fuse holder base features an M6 mounting hole and an M6 slot measuring 6mm long
Includes stainless steel M8 studs, hex nuts, and split washers
The flexible cover has a UL 94 V-0 flammability rating
Applications:
Battery and Alternator Connections
High-Current Circuit Protection
Electric Construction Equipment
*Fuses not included
|
12.43 |
|
|
MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps
Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply.
Features:
Blister packaging promotes the easy retail display
Base style 2 with mounting brackets and M6 holes is designed for outboard mounting
M5 threaded studs, split washers, and hex nuts for simple fuse installation
Protective cover openings at the ends accommodate heavy-duty cables
Applications:
High-Current Circuit Protection
*Fuses not included
|
6.65 |
|
|
1 Ton Twing Block
The Twing block features a spring-loaded side opening mechanism for true one-handed rigging, even while wearing sailing gloves. Black anodized aluminum sideplates are edged with robust bumpers to protect the block, topsides, and deck. The sheave is aluminum rolling on a bearing system shared with Harken's existing 2.3T high-load snatch block.
Features:
Side opening side plate - Easy to rig and remove from sheet
Spring loaded button release - Quick one-handed rigging
Anti-capsize bar - Keeps sheave aligned on sheet
ULC main bearing - Sheave turns smoothly under extreme loading
Sideload balls - Carry loads especially when the block is not aligned in light air
Thimble at pivot base - Use 1:1 or 2:1 up-down control
Machined aluminum inner sideplates - High strength, low weight
Soft polyurethane outer side plate bumpers - Protects block and deck
Uses:
Twing, tweaker control for code zero sheets
Can be used as a snatch block when combined with a soft shackle
Spinnaker sheet and guy control
Specifications:
Sheave Ø (mm): 38.5 mm
Sheave Ø (in): 1-1/2 in
Maximum line Ø (mm): 11 mm
Maximum line Ø (in): .43 in
Maximum working load (kg): 1000 kg
Maximum working load (lb): 2205 lb
Breaking load (kg): 2000 kg
Breaking load (lb): 4409 lb
|
192.30 |
|
|
12mm Bolt-Down Fairlead - Single
Harken Bolt-Down Fairleads are used on boats 6–15 m (20–50 ft) as shallow-angle line deflectors. These weight-saving fairleads are built of 6061-T6 Hard Lube-anodized aluminum for durability. Smooth surfaces and radiused center holes minimize line wear.
Specifications:
Length (mm): 48 mm
Length (in): 1-7/8 in
Width (mm): 18 mm
Width (in): 11/16 in
Weight (g): 28 g
Weight (oz): 0.99 oz
Maximum line Ø (mm): 10 mm
Maximum line Ø (in): 3/8 in
Fasteners (mm): 6 SH mm
Fasteners (in): 1/4 SH in
Maximum working load (kg): 908 kg
Maximum working load (lb): 2000 lb
Breaking load (kg): 1816 kg
Breaking load (lb): 4000 lb
Height (mm): 28.2 mm
Height (in): 1-1/8 in
A (mm): 32 mm
Center hole Ø (mm): 12 mm
Center hole Ø (in): 15/32 in
|
35.27 |
|
|
Size 1 Single Swivel Block with Becket
With the unique super-low friction ball race systems, featuring acetal sheaves and delrin ball bearings, running on a large diameter center boss. This allows us to fit more load-bearing balls, which ensure extremely low friction performance, even under high loads.
Specifications:
Sheave size: 20mm x 8mm
Max rope diameter: 5mm
Safe working load: 275kg / 606lbs
Breaking load: 550kg / 1210lbs
Length: 39.1mm
Weight: 13g
|
15.98 |
|
|
NMEA 2000 T-Connector - 1-Way Extension Block
As the NMEA 2000 network expands beyond the 3-device limit of Digital Yacht’s NMEA 2000 Starter Kit, users can use one of these single T-pieces to add devices. With male > female > female connectors, multiple T-pieces can be plugged together or added to the 4-way T-piece included in the starter kit. The lower “drop cable” connector is female so that there are no exposed pins when the drop cable is removed.
*Digital Yacht can supply NMEA 2000 cables and connectors to expand the NMEA 2000 to whatever size is needed (up to the maximum 50 NMEA 2000 device limit).
Features:
NMEA 2000 Single T-Piece
Standard “Micro C” connectors make it very easy for future network expansion
Metal connectors improve reliability
Waterproof rating of IP68
|
26.83 |
|
|
40mm Twing Block
Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.
Features:
Opening side plate - Easy to rig and remove from sheet
Spring biased to open when unlatched - One-handed operation
Roller at pivot base - Use 1:1 or 2:1 up-down control
Carbo Air® block construction - High strength for durability and lightweight for maximum float in light air
Uses:
Dinghies, sport boats, and small keelboats
Spinnaker sheet and guy control
Code zero sheet up-down control
Specifications:
Sheave Ø (mm): 40 mm
Sheave Ø (in): 1-9/16 in
Length (mm): 89 mm
Length (in): 3-1/2 in
Weight (g): 86 g
Weight (oz): 3 oz
Maximum line Ø (mm): 12 mm
Maximum line Ø (in): 3/8 in
Maximum working load (kg): 275 kg
Maximum working load (lb): 606 lb
Breaking load (kg): 825 kg
Breaking load (lb): 1818 lb
|
63.43 |
|
|
RAM Universal Drill-Down Laptop Mount
Compatible Vehicles:
Universal for All Vehicles
This universal drill type Laptop Stand System installs quickly and easily into most vehicles by using self tapping screws, or by drilling and then bolting down the mount base to the vehicle. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Hardware to secure mount base to vehicle is not provided.
|
205.03 |
|
|
Laser Replica 15:1 Boom Vang Assembly
The Barton boom vang assembly gives all the advantages of systems costing twice the price. 15:1 purchase is achieved through clever design of the base plate, fitted with the unique Barton swivelling triple cam block.
It is simple to fit and easy to use.
Compatible With:
Laser class sailboats
In the Box:
Barton base plate - Spectro anodised aluminium with three fixing bolts
00 931 Series 0 triple swivel cam block (attached to base plate by shackle)
00 110 Series 0 single fixed eye block (attached to base plate by shackle)
00 211 Series 0 double block with becket
01 091 Series 1 single tang block with becket and curved kicker key for boom
3' 11" (1.2 M) of 5/32" (4 mm) - dyneema line for primary Red control line
9' 11"(3 M) of 5/32" (4 mm) line for secondary Red control line
*Sold as and Individual
|
179.70 |
|
|
Blokart Land Sailing Mainsheet Block Kit
Upgrade or replace your current Mainsheet line hardware with the Barton class-approved Blokart Land Sailing Mainsheet Block Kit. Creates a user-friendly mechanical advantage on the mainsheet line. Complete with all hardware and instructions.
*Mainsheet line sold separately.
Compatible With:
Blokart Land Sailing vessel
In the Box:
1 x Ratchet Block (90500)
1 x 30mm Single swivel block (N01130)
1 x Stand up Spring
2 x Rope Stopper Black (6mm & 8mm)
*Sold as a Kit
|
141.50 |
|
|
Manta/Odyssey Land Sailing Mainsheet Block Kit - 2:1
Upgrade or replace your current Mainsheet line hardware with the Barton class-approved Manta/Odyssey Land Sailing Mainsheet Block Kit. Creates a 2:1 mechanical advantage on the mainsheet line. Complete with all hardware and instructions.
*Mainsheet line sold separately.
Compatible With:
Manta Land Sailing vessel
Odyssey Land Sailing vessel
In the Box:
1 x Ratchet Block (90500)
2 x 45mm Single swivel block (N03130)
1 x 45mm Single swivel with Becket (N03131)
1 x Stand up Spring
*Sold as a Kit
|
165.16 |
|
|
Barton Manta/Odyssey 2 Land Sailing Mainsheet Block Kit - 3:1
Upgrade or replace your current Mainsheet line hardware with the Barton class-approved Manta/Odyssey 2 Land Sailing Mainsheet Block Kit. Creates a 3:1 mechanical advantage on the mainsheet line. Complete with all hardware and instructions.
*Mainsheet line sold separately.
Compatible With:
Manta 2 Land Sailing vessel
Odyssey 2 Land Sailing vessel
In the Box:
1 x Ratchet Block (90500)
3 x 45mm Single swivel block (N03130)
1 x 45mm Single swivel with Becket (N03131)
1 x Stand up Spring
*Sold as a Kit
|
188.23 |
|
|
The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlasses. The new HRC6 and HRC8 are packed with original and proven features including rode management technology developed by Maxwell.
HRC6
Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up
Guaranteed trouble free rode transition from rope to chain, by means of an innovative, proven and patented pressure arm system, within a safe enclosed design
Integrated composite nylon, through deck hawse pipe for ease of installation and smooth, snag-free operation
High efficiency spur gearbox incorporating a robust non-backwind mechanism
High speed, jam-free retrieval of rope and chain controlled from a remote panel mounted Up/Down switch
Emergency "free fall" function in the event of onboard power failure
Revolutionary new chainwheel - see over
Heavy duty, dual direction motor incorporating new technology features, including integrated wiring for quick electrical installation, is easily removed for simple routine electric brush maintenance
Now incorporating Maxwell's automatic free-fall technology. Simply activate the windlass 'free fall' lever, operate your down control (helm station or footswitch) and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control and the 'free fall' device automatically disengages allowing you to power up your anchor
Aesthetically pleasing above deck design, encapsulating the motor and drive in a watertight case, saving space below deck and allowing simple routine maintenance
Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection
Specifications:
Model: HRC6
Maximum Pull: 900lbs
Chain Short Link: 1/4"
Rope Size (Nylon): 1/2"
Line Speed(Anchor Retrieval): 108'/min
Power Supply(DC): 12V or 24V
Motor Power: 600W
Net Weight: 25lbs
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1038.07 |
|