|
Tortuga Dimmer - 12/24V
The Tortuga Dimmer is designed to easily adjust the interior or exterior light level from 0-100% output. Touch the "up" button to turn the light on, and touch the "down" button to turn the light off.
Press and hold either up or down on the included switch to increase or decrease the light output level to your liking. Release it at any point to maintain the current brightness.
If users are leaving the boat, the Tortuga features an exit mode. Push the "down" button two times within 1.5 seconds, and the light will flash twice and turn off after 1 minute.
Features:
The Tortuga is pulse width modulated, so it will work with LED, incandescent, or halogen lights
It is also rated for 12V or 24V
Die-cast aluminum housing
IP66
10-30VDC
Rated for 8A
Includes switch
*The "P" within the part number indicates retail packaging
|
54.07 |
|
|
Headhunter XRS-124 X-CAL 12/24V Pump
X-Caliber – 12-24V DC Water Pressure Pump
Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features.
A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.
Part#Description
XRS-124X-Caliber 12-24 VDC Saltwater Pressure System
Control Panel:
Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.
Advanced Features:
Adjustable cut in pressure
Adjustable power setting
Operates on 12 or 24VDC
Over voltage protection
Under voltage protection
Over current protection
Anti-flooding protection
Dry run protection
Variable Speed
Rotating bracket
Product Details/Specifications:
Liquid Temp
32°F (0°c)-104°F (40°c)
Ambient Temp
32°F (0°c)-122°F (50°c)
Max Pressure 67 PSI (4.5 bar)
Max Flow 10 GPM (38 lpm)
Suction/Discharge 3/4” FPT (Optional metric adapter)
Weight 16lbs (7.2 kg)
Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H
|
2422.73 |
|
|
DeckHand Dimmer - 12 Amp/24V
Features:
Illuminated exit with adjustable time delay
Digitally controls dimming of non-regulated LEDs, incandescent, and halogen lights
Memory for last setting
Provides continuous voltage control from 0 to 100% of input voltage
Offset mounting tabs allow dimmers to be mounted close together
Retail package includes momentary (ON)-OFF-(ON) switch
Specifications:
Nominal Voltage: 12 Volts DC
Temperature Rating: -40 degrees C to 85 degrees C
Maximum Parasitic Current: 2mA
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
81.95 |
|
|
B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is cool white
95 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
B3 Downlight Surface Mount - Blue - SS Trim - IP67 - 12/24V
Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.
Features:
The light color is blue
13 Lumens
10-30 VDC
1 Watt
IP67
*The "P" within the part number indicates retail packaging
|
17.82 |
|
|
7" Oval Dome Light with Switch & Dimming - 12/24V
The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.
Features:
12/24V
42 x 0.5-watt 2835 LEDs
Natural White (4250K)
680 Effective Lumens
Plastic housing with a high-impact plastic lens
Surface mount, 3 stainless steel screws Included
IP67
*The "P" within the part number indicates retail packaging
|
60.46 |
|
|
DeckHand Dimmer - 12 Amp/12V
Works with all incandescent and non-regulated LED lamps
Memory for last setting
Illuminated exit with adjustable time delay
Provides continuous voltage control from 0 to 100% of input voltage
Offset mounting tabs allow dimmers to be mounted close together
Retail package includes momentary (ON)-OFF-(ON) switch
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
71.58 |
|
|
Adjustable Linear LED Light with Built-In Dimmer - 12" Length, 12VDC, Warm White with Switch
These sleek Light Bars are compact and put out the light. >80 CRI LED.
Features:
Only 9.5mm Thick!
Built-in Touch Switch and Easy Mounting
High CRI Light for beautiful surroundings
|
42.14 |
|
|
135Amp 12/24V Windlass Isolator
Maxwell circuit breaker/isolator panel, 135 Amp 12/24-volt, suitable for all 800 to 3500 Series 12V & 4000 24V windlasses.
Features:
For protection of the main conductor circuit for DC winches and the control circuit for hydraulic winches
Mount as close as possible to the battery power source to ensure protection against short circuit and to reduce the risk of DC motor burn-out in the event of winch overloading
Enables the battery, or electrical supply, to be isolated when winch is not in use
Suitable for 12V or 24V DC systems
|
130.44 |
|
|
3-Way Bilge Panel - 12/24V
Three- positions switch bilge pump control panel 12/24V. Manual, automatic and off.
Features:
The automatic feature operates in combination with automatic bilge level switches or automatic bilge pumps
Integrated fuse holder, fuse and operating light
|
35.86 |
|
|
35W Slimline LED Floodlight, 12/24V, Cool White, 4800 Lumens, 3' Cord - White Housing
Lunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful.
Specifications:
Power: 35W
Voltage Range: 12/24V
Output: 4800 Lumen, 5700K, >80CRI
Dimensions: 211 (8.3”) W x 165 (6.5”) H x 39 (1.5”) D
|
225.36 |
|
|
Gen II 3010 HD Series 12/24V Driver
Features:
12/24V DC Driver for Pro Series HD Gen2 3010 models
Input Voltage: 12 VDC, 24 VDC
Current: 8.2 Amps, 4 Amps
Recommended Fuse: 10 Amp, 6.3 Amp
|
743.75 |
|
|
Wireless Remote Spot Light
Universal 12/24V circuit with bright 100W, H3 halogen bulb
UV resistant, IP56 Weatherproof ABS housing and Lexan® lens
O-ring sealed housing, designed for the harsh marine environment - moisture, salt, shock and vibration tested
Universal snap-in mounting system (can be mounted upside down)
Super-quiet, all-weather motor with limit stops provides a full range of coverage
370° sweep and 120° Tilt (75° up and 45° down)
One touch auto sweep and S.O.S. function
Wireless dash mount remote standard; (hard wired & handheld remotes are optional)
3-Year limited warranty
Bulb: 100W, H3 Halogen
Power (Input voltage): 12/24V
Current draw (idle/in use): 0.03 amps / 7.0 amps
Peak Beam Intensity: 210,000 Cp
Peak Beam Distance: 917' (280M)
Lux @ 66' (20M): 525 Lux
Coverage at 66' (20M): 132 sq ft (12 sq m)
Rotation: 370° (built in limit stops)
Tilt: 120° Tilt (75° up & 45° down)
Wireless range: 200' (65M)
Dimensions: 7.5"W x 7.5"H x 9.25"D (19cm x19cm x 23.5cm)
Weight: 3.30lbs (1.5 kg)
Housing material: UV resistant PC/ASA
Lens material: UV resistant Lexan®
Operating temp range: 5°F - 113°F (-15°C -45°C)
IP Rating: IP56
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
397.22 |
|
|
JABSCO 31777-0000 VARIABLE SPEED PUMP DRIVE 12/24V
Compatible Pump Requirements:
•Diaphragm pumps with 3, 4 or 5 pumping chambers.
•12 or 24 VDC.
•12 amp maximum at 12 Volts.
•6 amp maximum at 24 Volts.
•3 amp minimum pump rating.
•MPU pressure switch rating: 30 to 65 psi.
•Motor voltage must match system voltage.
•Not compatible with Flojet 4405 and Jabsco 31295/31395 Series pumps.
|
144.29 |
|
|
Bilge Boat Monitor System - 12/24V
A complete monitoring system that provides you with real time data to your smartphone or your computer such as bilge water level alarm, battery status, positioning/tracking alarms if your boat is being moved and more! Easy to install, suitable for virtually any floating vessel with 12/24 V DC power onboard.
Features:
SIM card that works with all international GSM communication standards with outstanding connectivity; optional use your own SIM card.
Latest technology and designed for marine use, robust and very compact.
Built-in battery allows the device to continue to send information over a period of time if the power is cut.
IPX6 water protected and withstands rough movements at sea.
Approved by international insurance companies.
CE and FCC certified
*Reduce your insurance costs up to 20% by having an approved high-water alarm and positioning system installed onboard
|
282.92 |
|