A2.5 4 Color Downlight with Stainless Steel Trim - 8-30V Scandvik’s A2.5 LED Down Light with class-leading output, sealed weatherproof construction, and simple 2-wire installation is a favorite amongst boatbuilders. Intelligent circuitry allows color changes from white to blue, red, and green without specialized switches or controllers. Only a simple 2-position (on/off) toggle switch is needed. Switch the light off and on again within 1.5 seconds to cycle through each of the four colors. Turning the light off for more than 1.5 seconds resets the light to white. Features: Easy to install, spring-loaded butterfly clips hold the A2.5 firmly in place Works on 12V & 24V systems The light colors are white, blue, red, and green 2 in. mounting hole Recessed mount with spring clips 286 lumens IP67 Applications: This 316 stainless steel fixture is suitable for overhead exterior locations such as T-tops, hard tops, and mezzanines *The "P" within the part number indicates retail packaging

13.5" CM Mooring Buoy w/SS Iron - Red The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.  With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS).  To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).  The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.  Features: Large eye (4-3/8") and swivel (1-1/2") provide maximum strength Soft vinyl surface won't harm boat finishes Polyform's unique vinyl valve seals securely Even wall thickness for strength and durability One (1) piece design Technical Specifications: Mooring Iron - Stainless Steel Size - 13.5" x 18" (34.3 x 45.7cm) Tube Diameter - .625" (1.6cm) Circumference -  42.4" (107.8cm) Volume - 6.6 gallons (25L) *Sold as an Individual

13.5" CM Mooring Buoy w/SS Iron - White Blue Stripe The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.  With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS).  To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).  The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.  Features: Large eye (4-3/8") and swivel (1-1/2") provide maximum strength Soft vinyl surface won't harm boat finishes Polyform's unique vinyl valve seals securely Even wall thickness for strength and durability One (1) piece design Technical Specifications: Mooring Iron - Stainless Steel Size - 13.5" x 18" (34.3 x 45.7cm) Tube Diameter - .625" (1.6cm) Circumference -  42.4" (107.8cm) Volume - 6.6 gallons (25L) *Sold as an Individual

4" Locker Light with Touch Switch - 10-30V - Stainless Steel This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light features a 316 stainless steel trim ring and a built-in on/off switch that is backlit with a blue LED so that it is easily located even in the darkest of lockers. A touch-switch sensor immediately turns on the light when activated. Features: IP65 rated for installation in wet lockers Works with 12V and 24V systems Impact-resistant plastic lens 316 Stainless Steel Trim Ring 6 Warm White LEDs (2900-3200K) Surface mount, 2 SS Screws included Specifications: 10-30V Amps: 0.03 Lumens: 210 *The "P" within the part number indicates retail packaging

4" Locker Light with Motion Sensor - 10-30V - Stainless Steel This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light will automatically turn on when you open the hatch or door. The sensor immediately turns on the light when triggered by a combination of movement within 6 feet and a temperature of 98 degrees. The light will shut off after 20 seconds unless there is movement. Features: IP65 rated for installation in wet lockers Works with 12V and 24V systems Impact-resistant plastic lens 316 Stainless Steel Trim Ring 6 Warm White LEDs (2900-3200K) Surface mount, 2 SS Screws included 10-30V Specifications: Amps: 0.03 Lumens: 210 *The "P" within the part number indicates retail packaging

Furuno FCV588 8.4" Color Fishfinder w/ Rezboost The 8.4" FCV588 is a dual-frequency fish finder equipped with revolutionary new RezBoostT signal processing technology that increases resolution and improves target separation by up to 8x, utilizing a compact narrowband transducer. It offers improved clarity and resolution previously impossible with conventional narrowband transducers. A fast transmission rate of 3,000 PRR (Pulse Repetition Rate) per minute (at 5 m depth range), ensuring excellent target separation and clarity. The FCV588 includes a White Line feature to easily and accurately discriminate fish lying near the bottom. The top edge of the bottom echo is displayed in white to clearly show bottom structures. This feature helps to discriminate between weeds and bottom fish. The FCV588 also offers a number of unique features only found on Furuno Fish Finders. ACCU-FISHT is a unique fish size analyzer based on the latest digital technology. Accu-Fish allows the FCV588 to display the actual fish size on individual fish echoes on-screen. When used concurrently with Fish Marks, Accu-Fish is a great help in identifying fish targets on the display. Alternatively, Accu-Fish can display the actual depth of the fish target instead of fish size. Bottom Discrimination provides an at-a-glance recognition of bottom composition with four types of graphical displays (Rocks/Sand/Gravel/Mud) when connected to a supported thru-hull or transom mount transducer. Configurable Alarm function (depth, fish echoes, etc.) Furuno's TLL (Target Lat/Lon) output allows you to share and display information on a chart plotter. Easily interface the FCV588 with your Furuno Chart Plotter so that you can mark fishing grounds with various information (L/L, Depth, Water Temp, Fish size and Bottom type).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

5" Weatherproof PA Speaker w/Plastic Base Frequency Response: 300Hz 15kHz Max Power: 15W Sensitivity: 105dB 1W/1M Impedance: 8 Ohms Size: 5” Diameter x 4-3/4” Length Weatherproof ABS construction Includes 10' cord with 3.5mm plug

March 0156-0004-0300-4.187 Imp W/Mica Teflon Bsg 4.187

March 893-10-1/4" 24V Pump W/ 1286-0002-0100

B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes. Features: The light color is cool white 95 Lumens 10-30 VDC 1 Watt IP67 *The "P" within the part number indicates retail packaging

B3 Downlight Surface Mount - Blue - SS Trim - IP67 - 12/24V Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes. Features: The light color is blue 13 Lumens 10-30 VDC 1 Watt IP67 *The "P" within the part number indicates retail packaging

Ted CT Downlight - 2W - SS Round Touch - Warm The Ted Club Touch is an IP40 recessed Power LED downlight. It has a 72mm round trim composed of AISI 316 stainless steel and a frosted lens. Specifications: Weight: 0.25 lbs. Dimensions: 0.25 × 0.25 × 0.25 in Trim Finish: Stainless steel Power Type: Constant voltage Light Source: 1 x high luminosity Supply: 10 - 30 V Power Consumption: 2 W Current Consumption: 0.09 A @ 24V Average Lifetime: 50,000 hours Dimmable: Yes IP Security degree: 40 Frame Diameter: 2-53/74″ Recess: 5/8" Hole Diameter: 2-1/8" Frame Material: AISI 316 stainless steel  Light Color: Warm Mounting: Screws Warm White Specifications: Angle: 100° Light Flow: 105 lm     Efficiency: 58 lm/W    Light Beam – Distance 1 m: Diameter 2.43 m / 40.8 lux     Light Beam- Distance 2 m: Diameter 4.85 m / 10.2 lux     Light Beam- Distance 3 m: Diameter 7.28 m / 4.5 lux  

LED 304 Stainless Steel LED Reading Light - 8-30V This is a 304 stainless steel LED cabin and reading light. Features: 12/24V Adjustable swivel light On/off rocker switch 8-30 VDC, 3.1 Watt 16 SMD 2835 warm white LEDs 154 lumen 120° Beam angle *The "P" within the part number indicates retail packaging

8" Scan-Strip 4 Color LED Light - RGBW This 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green. Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 1.2 Lumens: 94 Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging

16" Scan-Strip 4 Color LED Light - RGBW This 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green. Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 2.4 Lumens: 180 Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging