Engine Cooling Pump for Kohler 4-6 Cylinder Diesel - 4-6.5kW Gas - 12.5 kW Gas Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models: 4-6 Cylinder Diesel 4-6.5 kW Gas 12.5 kW Gas Replaces Pump: Kohler - 267373, 246489, 344089 (Impeller Kohler 229826) Sherwood - G907P (Impeller Sherwood 9959K)

Engine Cooling Pump for Kohler - 5-7 Diesel kW Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models: Kohler 5-7 KW Diesel Replaces Pump: Kohler - 28487 359341 GM28487 (Impeller Kohler 359978) Sherwood - G8001 (Impeller Sherwood 8000K)

Engine Cooling Pump for Kohler Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models: N/A Replaces Pump: Kohler - GM46936, GM344371 (Impeller Kohler 229826) Sherwood - G910P (Impeller Sherwood 9959K)

Engine Cooling Pump for Kohler - 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, & 8EFKD Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines. For Engine Models: 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, and 8EFKD Replaces Pump: Kohler - GM63535 (Impeller Kohler 359978) Sherwood - G8005 (Impeller Sherwood 8000K)

Sherwood- Engine Cooling Pump  More Info: F85 F-85, Westerbeke Pilot 10-20 16423, The F-85 pump is no longer available directly from Sherwood so we use a G-65 pump and two bushings to reduce the port size to 1/2". FEATURES Pump Body: Bronze Ports: 1/2" NPT, (Bushed down from 3/4") Cam: Full Impeller: Neoprene Shaft Seal: Lip Type Drive: Flange Mounted to Engine.     APPLICATIONS / CHARACTERISTICS Flexible Impeller Engine Cooling Pump.  

Johnson 10-24268-4 Engine Cooling Pump  

2" Bronze Pedestal Pump Flow rate: Nominal 60 gallons/min at 1500 rpm Self-priming from dry up to 7.8ft Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear (this may affect performance - seek advice from your distributor). Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. APPLICATIONS MARINE: Engine cooling, pumping bilges, wash downs, circulating water in bait tanks, utility dock side pump. INDUSTRIAL: Circulating and transferring, Velocity-mixing, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Inks, Dyes, Alcohol, Tanning Liquors, Glycerin, Brine, etc. FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Jabsco 18930-0000 Pump 1 1/4" with Pulley Adapt Pump Body: Bronze Port Size: 1 1/4" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter A belt   Jabsco Engine Cooling Pump with 1 1/4" Hose Ports and Pulley Adaptor that fits Chris-Craft 454 C.I.  

Jabsco 18930-0010 Engine Cooling Pump Pump Body: Bronze Port Size: 1 1/4" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel  Pulley: 6 1/2" diameter A belt  

Jabsco 18930-0020 Engine Cooling Pump 1 1/4" Hose Ports Pump Body: Bronze Port Size: 1 1/4" ID Hose GPM: 15 Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Shaft Key: 3/16" Pulley: 6 1/2" diameter A belt   Self-priming from dry up to 2.4m. Constructed from marine quality bronze and stainless steel. Mechanical seal. Easy to service and maintain. Handles hard and soft solids without clogging. Will tolerate abrasive wear. Can pump in either direction.   Will not airlock.    

Jabsco 18940-0010 Engine Cooling Pump 1 1/4" Ports Pump Body: Bronze Port Size: 1 1/4" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter "A" belt     This Jabsco alternator mounted engine driven water pump has been used on a wide range of engines including Chrysler, Lehman, and Powerhouse Marine. Engineered for marine applications and a long service life, the body is cast bronze and features a stainless steel shaft. Impeller access is available by removing the front portion of the pump body. Hose barbs are cast into the pump body so that tail pieces are not required for installation. Pump is driven by a 6 1/2" pulley that is compatible with type A belts.   Key Features Flange mounted engine driven flexible impeller water pump Self-priming at slow RPMs Includes 6 1/2" pulley compatible with type A belts Corrosion resistant bronze pump body  Stainless steel shaft for superior corrosion resistance   Compatible engines   Chrysler: replaces Sherwood model G5 LM 318 LM 340 LM 360 LM 383 LM 400 LM 440 Lehman 302, 351 cu. in. Powerhouse Marine 302, 351 cu. in.  

Wash Down Pump - 12V - 3.4 GPM Premium wash down pump 12V with capacity 12,9l/min (3,4GPM). For efficient deckwash or wash down duties. Cut off pressure 5bar (70psi). Features: Easy to install with quick connect ports for 1/2″ hose  Inlet strainer 40 mesh included Specifications: Fuse Size: 15A

Jabsco 17540-0201 Engine Cooling Pump Jabsco 17540-0201 is a Detroit Diesel marine engine cooling pump   Impeller: Neoprene Shaft Seal: Carbon/Ceramic Mechanical Seal Port Size: 3 Inch   This is the Marine Engine Cooling Pump for Detroit Diesel Series 60 Engines,  Detroit Diesel pumps 23525200, 23522735, 23535447. 

Jabsco 17360-1001 Engine Cooling Pump For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973   Caterpillar, D-336, D-343, D-353, 3N1888   Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.   Pump Body: Bronze Port Size: 2-1/2" Flange Type Impeller: Neoprene use Jabsco 17370-0001-P Impeller Cam: Wear Resistant Polyurethane Cam/Liner Shaft Seal: Mechanical Face Seal Shaft: 316 Stainless Steel   Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Bronze flexible impeller engine cooling pump Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm Self-priming from dry up to 2.4m (7.8ft)   Minor plumbing modifications may be required for certain applications.   Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive   

Sherwood Engine Cooling Pump G-1010   More Info: G1010 G-1010, Replaces G-1010-01, G1010-01, Onan 132-0343 132-0347 132-0356 5 Cylinder Diesel FEATURES Pump Body: Bronze Ports: 1" Hose Cam: Full Impeller: Neoprene Shaft Seal: Mechanical Drive: Flange Mounted to Engine.     APPLICATIONS / CHARACTERISTICS Flexible Impeller Engine Cooling Pump.