B3 Downlight Surface Mount - Blue - SS Trim - IP67 - 12/24V Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes. Features: The light color is blue 13 Lumens 10-30 VDC 1 Watt IP67 *The "P" within the part number indicates retail packaging

B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes. Features: The light color is cool white 95 Lumens 10-30 VDC 1 Watt IP67 *The "P" within the part number indicates retail packaging

LED Courtesy Light - Surface Mount - Blue The light has an ABS housing featuring a diamond-cut lens and a white snap-on trim ring with blue LEDs. It is great for illuminating walkways or steps and is available in 12V only. Features: Blue LEDs with white trim 15 Lumens 12 Volt 0.5W IP65 *The "P" within the part number indicates retail packaging

Courtesy Light - 4 LED Surface Mount - Blue LED White Case Features: Operates 9-16 Volt DC Systems Rated at 100,000 Hours of Service Life Shock and Vibration Proof Cool to the Touch Energy Draw 30-65 mA depending on color No Corrosion Potted to Seal Out Moisture 4 LEDs WARNING: This product can expose you to chemicals including STYRENE,Acrylonitrile which are known to the State of California to cause cancer, and 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Headhunter XRS-124 X-CAL 12/24V Pump X-Caliber – 12-24V DC Water Pressure Pump Quiet, reliable, blasting water pressure. Combining advanced DC motor and control technology with a proven self-priming centrifugal pump, the X-caliber surges past the competition with a flood of features. A built in microprocessor interfaced with a rugged ceramic temperature and pressure sensor provides variable speed operation, prevents dry running damage and ensures complete electrical protection.   Part#Description   XRS-124X-Caliber 12-24 VDC Saltwater Pressure System   Control Panel: Program power and pressure settings via the integrated control panel. Four colored LED’s display current settings and alarm conditions.   Advanced Features: Adjustable cut in pressure Adjustable power setting Operates on 12 or 24VDC Over voltage protection Under voltage protection Over current protection Anti-flooding protection Dry run protection Variable Speed Rotating bracket   Product Details/Specifications:   Liquid Temp 32°F (0°c)-104°F (40°c) Ambient Temp 32°F (0°c)-122°F (50°c) Max Pressure 67 PSI (4.5 bar) Max Flow 10 GPM (38 lpm) Suction/Discharge 3/4” FPT (Optional metric adapter) Weight 16lbs (7.2 kg) Dimensions 15”(382mm)L 8”(203mm)W 7”(178mm)H      

A3 Downlight - Surface/Flush Mount - Stainless Steel This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).  Features: 316 stainless steel trim 6 x 0.5-watt warm white LED 242 Lumens 2.2 Watt 12 Volt   IP67 Applications: A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture *The "P" within the part number indicates retail packaging

A3C Downlight Kit - Warm White with Stainless Steel, White, & Black Trim Rings Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate. Features: Warm white (includes stainless steel, white, and black trim rings) 12 Volt - 2.8 Watt 12 pieces LEDs 300 Lumens IP67 Applications: It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel Other applications include hard tops, arches, walkways, overhangs, and shower stalls *The "P" within the part number indicates retail packaging

A3C Downlight Kit - Cool White with Stainless Steel, White, & Black Trim Rings Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate. Features: Cool white (includes stainless steel, white, and black trim rings) 12 Volt - 2.8 Watt 12 pieces LEDs 300 Lumens IP67 Applications: It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel Other applications include hard tops, arches, walkways, overhangs, and shower stalls *The "P" within the part number indicates retail packaging

7" Oval Dome Light with Switch & Dimming - 12/24V The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark. Features: 12/24V 42 x 0.5-watt 2835 LEDs Natural White (4250K) 680 Effective Lumens Plastic housing with a high-impact plastic lens Surface mount, 3 stainless steel screws Included IP67 *The "P" within the part number indicates retail packaging

4" Locker Light with Touch Switch - 10-30V - Stainless Steel This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light features a 316 stainless steel trim ring and a built-in on/off switch that is backlit with a blue LED so that it is easily located even in the darkest of lockers. A touch-switch sensor immediately turns on the light when activated. Features: IP65 rated for installation in wet lockers Works with 12V and 24V systems Impact-resistant plastic lens 316 Stainless Steel Trim Ring 6 Warm White LEDs (2900-3200K) Surface mount, 2 SS Screws included Specifications: 10-30V Amps: 0.03 Lumens: 210 *The "P" within the part number indicates retail packaging

LED Courtesy Light - Surface Mount - White The light has an ABS housing featuring a diamond-cut lens and a white snap-on trim ring with white LEDs. It is great for illuminating walkways or steps and is available in 12V only. Features: Blue LEDs with white trim 15 Lumens 12 Volt 0.5 W IP65 *The "P" within the part number indicates retail packaging

4" Locker Light with Motion Sensor - 10-30V - Stainless Steel This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light will automatically turn on when you open the hatch or door. The sensor immediately turns on the light when triggered by a combination of movement within 6 feet and a temperature of 98 degrees. The light will shut off after 20 seconds unless there is movement. Features: IP65 rated for installation in wet lockers Works with 12V and 24V systems Impact-resistant plastic lens 316 Stainless Steel Trim Ring 6 Warm White LEDs (2900-3200K) Surface mount, 2 SS Screws included 10-30V Specifications: Amps: 0.03 Lumens: 210 *The "P" within the part number indicates retail packaging

Profile P1100 1.5W Surface Mount Light - Blue - Chrome Finish The Profile couples the ease of surface mount installation with beautiful light and a premium titanium-coated finish.  Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch Multiple color options - 1 fixture Simple 2 wire hookup 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1100 1.5W Surface Mount Light - Blue - Brushed Nickel Finish The Profile couples the ease of surface mount installation with beautiful light and a premium titanium-coated finish.  Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch Multiple color options - 1 fixture Simple 2 wire hookup 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House

Profile P1100 1.5W Surface Mount Light - Blue - White Finish The Profile couples the ease of surface mount installation with beautiful light and a premium titanium-coated finish.  Small in size and simple to install, fixture mounts to most any marine surface - inside and out. Rugged & Waterproof With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*. *IP67 rated. Not for use in submersible applications. Features: Surface Mount - Less than 3/4" thick Use your existing wiring and switch Multiple color options - 1 fixture Simple 2 wire hookup 3.48" Round 0.72" Deep LED Marine Grade Refit friendly Power: 1.5W Beam Angle: 120° Typical Applications: Hardtop Arch Cockpit Courtesy Pilot House