|
GT12M Bronze Thru-Hull - 350W - 0 Degree
Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display.
Midband Chirp Traditional Sonar
This 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater.
Broad Frequency Range
Use the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.
Optimum Ping Sensitivity
Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.
Thru-Hull Installation
A durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.
Auto-ID Technology
Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.
Fits Various Hull Types
Configurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block.
In the Box:
GT12M-THF transducer
Jam nut
Washer
Documentation
Specifications:
Transducer Frequency: Medium band CHIRP (85-165 kHz)
Transducer Power: 350 W
Transducer Beamwidth: 24° -16°
Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater
Transducer Cable Length: 50 ft
Transducer Depth/Speed/Temperature: Depth, temperature
Transducer Number of Pins: 8-pin
Housing Material: Bronze
Transducer Supported Deadrise/Transom Angles: 0° supports hull deadrise angles from 0° to 7°
|
359.99 |
|
|
GT12M Bronze Thru-Hull - 350W - 12 Degree
Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display.
Midband Chirp Traditional Sonar
This 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater.
Broad Frequency Range
Use the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.
Optimum Ping Sensitivity
Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.
Thru-Hull Installation
A durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.
Auto-ID Technology
Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.
Fits Various Hull Types
Configurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block.
In the Box:
GT12M-THF transducer
Jam nut
Washer
Documentation
Specifications:
Transducer Frequency: Medium band CHIRP (85-165 kHz)
Transducer Power: 350 W
Transducer Beamwidth: 24° -16°
Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater
Transducer Cable Length: 50 ft
Transducer Depth/Speed/Temperature: Depth, temperature
Transducer Number of Pins: 8-pin
Housing Material: Bronze
Transducer Supported Deadrise/Transom Angles: 12° supports hull deadrise angles from 8° to 15°
|
359.99 |
|
|
GT12M Bronze Thru-Hull - 350W - 20 Degree
Designed for reduced drag and optimum sonar performance on midsize fishing and cruising boats, this flush-mounted, 350-watt mid-band CHIRP transducer clearly defines fish arches, structure, and bottom depth returns on your display.
Midband Chirp Traditional Sonar
This 8-pin, 350-watt bronze thru-hull transducer features high-definition mid-band CHIRP sonar that clearly defines fish targets and structures down to 800’ in saltwater and 1,200’ in freshwater.
Broad Frequency Range
Use the perfect frequency for the waters you’re fishing. Covering the medium frequency range, this transducer pulses from 85–165 kHz, displaying a wide coverage area, crisp fish arches, and accurate depth readings.
Optimum Ping Sensitivity
Offering excellent sonar sensitivity, low noise, high resolution, and good separation of targets, this robust transducer makes it easier than ever to distinguish fish and structure on your compatible chartplotter display.
Thru-Hull Installation
A durable bronze housing and stem offer straightforward thru-hull flush mounting for minimum drag and optimum beam orientation for clear sonar returns.
Auto-ID Technology
Enjoy simple plug-and-play operation with Garmin auto-identification technology — which enables the sonar to automatically configure itself to the transducer being used.
Fits Various Hull Types
Configurable for a wide variety of boat hull materials, including fiberglass, composite, and wood, the transducer is available in a range of tilt versions to accommodate deadrise angles of 0–20° without a fairing block.
In the Box:
GT12M-THF transducer
Jam nut
Washer
Documentation
Specifications:
Transducer Frequency: Medium band CHIRP (85-165 kHz)
Transducer Power: 350 W
Transducer Beamwidth: 24° -16°
Transducer Maximum Depth: 800 ft saltwater / 1200 ft freshwater
Transducer Cable Length: 50 ft
Transducer Depth/Speed/Temperature: Depth, temperature
Transducer Number of Pins: 8-pin
Housing Material: Bronze
Transducer Supported Deadrise/Transom Angles: 20° supports hull deadrise angles from 16° to 24°
|
359.99 |
|
|
RealVision 3D™ All-In-One Bronze Thru-Hull Transducer - 0° - 8M Cable
Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.
The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells, and while maneuvering. The RV-200 also has a built-in fast response water temperature sensor for quick, accurate readings.
The RV-200 features a rugged cast-bronze through hull body suitable for fiberglass or wooden hulls. The RealVision 3D™ transducer elements are arranged with a 0° offset for boats with flat bottoms. The lowprofile design slips effortlessly through the water without causing drag or cavitation. The near-flush RV- 200 works great on trailered boats too, and with no fairing block to cut, installation is a breeze.
What’s in the Box?
RV-200 Bronze All-In-One Through Hull Transducer with 8-meter (26-foot cable)
Anti-rotation bolt kit
Installation instructions
|
1319.99 |
|
|
B117 Bronze Thru-Hull Depth/Temp - 8-Pin
This bronze thru-hull mount transducer performs well at high speeds.
An excellent choice for fiberglass and wood hulls, this 8-pin 600 W narrow stem transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Do not use on metal hulls.
When using with a 6-pin Garmin sounder, a transducer adapter cable is required
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
260.99 |
|
|
B265LM Bronze Thru-Hull Mount Transducer with Depth & Temperature
Garmin's best performing 1 kW thru-hull transducer, this bare wire mount performs well in deep water and has exceptional bottom and water column detail.
This transducer has a depth of 3,000 ft; an operating frequency of 42 to 65 kHz and 85 to 135 kHz; a beamwidth of 16 to 25 degrees and 11 to 16 degrees; and a 0 to 20 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Compatible Devices:
GSD™ 26 CHIRP Professional Sonar Module
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1574.99 |
|
|
B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-Pin
Garmin's best performing 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail.
This transducer has a depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees and 6 to 10 degrees; and a 0 to 20 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Compatible Devices:
GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv, 7616xsv
GSD™ 25 Premium Sonar Module
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1413.00 |
|
|
B258 1kW Bronze Thru-Hull Depth/Temp with FB - 8-Pin
Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-22° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
1343.99 |
|
|
B258 1kW Bronze Thru-Hull Depth/Temp w/FB - 8-Pin
Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. This transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-25° deadrise angle.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
854.99 |
|
|
Airmar B117 200/50kHz Bronze Thru-Hull Transducer - 6 Pin
010-10182-01
Connect our bronze, thru-hull mount transducer to your compatible device to receive depth and temperature data. This transducer has an operating frequency of 200 and 50 kHz; a beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz; and a 0 to 8 degree deadrise.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
278.52 |
|
|
SS75 High Chirp 12 Degree Bronze Thru-Hull xSonic Transducer
Airmar’s low-profile, Chirp-ready transducer models are the perfect addition to smaller boats, such as center consoles. The high-frequency band has a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs, and other structures. High frequency also shows amazing target separation on baitfish and schooling gamefish. The SS75H transducer, operating at 130 to 210 kHz, delivers up to 80 kHz of total bandwidth in just one installation for outstanding bottom detail and fish-target resolution.
This Tilted Element™ transducer has the element fixed at a 12-degree angle within the housing. Because the transducer is installed almost flush with the hull, the tilt corrects for the hull deadrise. It orients the ceramic element horizontally to ensure maximum echo returns to the transducer.
Features:
Depth and fast-response water-temperature sensing
600 W of power with a maximum depth of 214 m (700')
High frequency (130 to 210 kHz)
15- 9 degree beamwidth
High frequency delivers great shallow-water performance, bottom detail, and clear fish-target returns
Low-profile, thru-hull housing provides good display resolution at speed when installed properly
Recommended for stepped, planning, or displacement hull
Stainless steel housing for use in all hull materials
Patented Xducer ID® technology
Specifications:
Brand: Airmar Technology
Acoustic Window: Urethane
Cable-Length: 10 m (33')
Common Use: Fishing, Commercial Fishing
Connector: Simrad 9-Pin, Lowrance 9-Pin, Navico 9-Pin
Country of Origin: USA
Cross Reference: 000-13912-001
Deadrise Range: 8-15 degrees
Display Connector: 9N
Frequency Band: High
Functions: Depth, Temperature
High Frequency: 130-210 kHz
High Frequency Beamwidth: 15-9 degrees
Hole Size: Fiberglass or wood hull—70 mm or 2-13/16", Metal hull—79 mm or 3-1/8"
Hull Material: Compatible w/ all hull materials
Material: Stainless Steel
Max Deadrise: Up to 24 degrees
Max Deadrise Angle: 24 degrees
Max Depth: 214 m (700')
Max Vessel LOA: Up to 8 m (26')
Mix and Match Series: 12-Pin Chirp
Mounting Style: Tilted Element Thru-Hull
Power Rating: 600 W
Retractable housing: No
Sensor Connector: MMC
Single or Dual Frequency: CHIRP-Ready Single-Band
Tilt Angle: 12 degrees
Tilted Element: Yes
Weight: 1.4 kg (3 lbs.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
861.48 |
|
|
B45 Bronze Thru-Hull with Depth & Temperature - 8-Pin for Garmin
The B45 is Airmar’s smallest, bronze, thru-hull stem, offering quality design at an economical price. The classic housing is streamlined to deflect aerated water from the transducer’s face, providing solid echo returns.
Features:
Bronze housing
Depth and Temperature
Recommended for planning-hull powerboats and cruising sailboats up to 9 m (30’)
Good sensitivity in a compact housing
High-performance fairing included
Fast-response water-temperature sensor provides ±0.2°C (±0.1°F) accuracy
Specifications:
Fits: All Garmin 50/200 kHz units with 8-pin
Usable Shaft Length: 92 mm (3.62 in.)
Standard fairing block: 33-351-01
Frequency: 50/200 kHz
Beamwidth: 50 kHz—45°, 200 kHz—12°
RMS Power: 600 W
Maximum Depth Range (50 kHz): 235 m to 353 m (800 ft. to 1,200 ft.)
Maximum Depth Range (200 kHz): 118 m to 206 m (400 ft. to 700 ft.)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
336.82 |
|
|
B175HW CHIRP Bronze Thru-Hull 12° Tilt 1kW - 10-Pin Connector
High-Frequency, Wide-Beam CHIRP Transducer with Temperature with Bronze Thru-Hull with 12° Tilt.
Features:
Power: 1kW
Function: Depth,Temperature
Frequency: 150-250 kHz
Mount Style: Thru-Hull, Flush, 12 Degree Tilt
Housing Material: Bronze
10-Pin Connector
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1493.33 |
|
|
520T-BLD Bronze Thru-Hull Low Profile 600W - 10-Pin
Airmar B117 Housing Style Transducer
Features:
600 Watts
50/200 kHz
45/15 degree Beam Angles
Low Profile Bronze Thru-Hull with Temperature
30 Foot Cable with 10-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
240.00 |
|
|
CPT-S High CHIRP Bronze Thru-Hull Flush Mount Transducer - 0° Angle
The CPT-S High CHIRP transducer provides high resolution sonar imagery in a small and inexpensive package. With a simple design, the CPT-S is easy to install, while still offering excellent performance at speed. This CPT-S is a low profile, flush-mounted bronze Thru Hull High CHIRP transducer compatible with Raymarine's CP100 sonar module and embedded CHIRP MFD's. This single element conical CHIRP transducer provides a 25 degree fish targeting beam with a maximum depth of 900 feet. This model CPT-S accomodates hulls with a deadrise between 0-5 degrees.
Also connects to Axiom Pro S series Units with optional adapter cable A80490.
Features:
High Chirp Sonar
Max Depth: 900'
0 Degree Deadrise
|
299.99 |
|