|
MKA-60 Stabilizer Kit
Reduces bounce on bow-mount trolling motors. Equipped with a low profile mounting base that allows the stabilizer to be easily removed. The pivoting arm can be folded down when not in use.
Features:
Reduces motor bounce in the stowed position
Absorb vibrations to protect the motor shaft
Folds down when not in use
Multiple mounting orientations to fit your boat configuration
Easily removable, it leaves only a low-profile base
Stabilizer shafts can be cut to fit
Multi-position strap adjusts to accommodate all shaft sizes
Includes Stainless steel mounting hardware
Compatible with the QUEST series RT Instinct, Ulterra, RT Terrova, Terrova, and Ulterra, Riptide Ulterra, Terrova, Riptide Terrova, Riptide ST, PowerDrive, Riptide PowerDrive, PowerDrive V2, Riptide SP, and PowerDrive Pontoon
|
69.73 |
|
|
MKA-50 Bow-Mount Stabilizer Kit for Fortrex
Features:
Reduces motor bouncing when in stowed position
Attaches to the left or right side of bowguard
Pivots into vertical position and rests on the boat deck when motor is stowed
Rotates in the horizontal position with bowguard when the motor is deployed
Includes rubber bumper to protect deck finish
Stainless steel hardware tested for saltwater use
Fits any Fortrex or Riptide SF bow-mount trolling motor
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
47.93 |
|
|
MKA-58 Boat Deck Reinforcement Kit
Provides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors.
Features:
Provides additional strength and stability for mounting Minn Kota Quest series trolling motors
Helps to distribute torque loads associated with higher thrust motors
Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket
Multiple mounting hole patterns allow for flexible installation
Includes stainless steel hardware
Designed for use in saltwater
Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors
|
234.70 |
|
|
A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish.
34" deep x 22" diameter
Features 210 denier ripstop nylon with 4 heavy-duty 1" nylon straps
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
43.58 |
|
|
A durably constructed Minn Kota Drift Sock slows down your drift to enable proper bait presentation over holding fish.
34" deep x 22" diameter
Features 420 denier ripstop nylon with 4 heavy-duty 1" nylon straps
Weights at the bottom and floats at the top are sewn into the edge of the opening to allow the sock to open instantly when thrown into the water
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.30 |
|
|
MKA-49 Cable & Handle
For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable.
Features:
Compatible with cable steer bow-mount motors: Fortrex, Maxxum, Edge, Riptide SF, Riptide SM and Riptide SE
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
52.30 |
|
|
Rope & Handle
For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design and durable, abrasion-resistant 48" nylon rope.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.45 |
|
|
Double Down! 2019 Minn Kota Talon Promotion
To receive your rebate, purchase (2) two qualifying Minn Kota Talon 12' or 15' models now until June 30th, 2019. Receive up to $500 by submitting online only. Don't miss out on this fantastic offer!
Offer valid now until June 30th, 2019.
Save $500 on Two Minn Kota Talon
It's the only shallow water anchor that goes down to 15' deep. The only one you can control from anywhere on the boat. And the only one with User-Selectable Anchoring Modes that let you anchor in anything. When it comes to dominating shallow water, Talon is the only name you need to know.
Offer valid now until June 30th, 2019.
Specials Closeouts Remanufactured Rebates
|
|
|
Minn Kota
Minn Kota is the oldest manufacturer of electric fishing motors in the world with nearly 70 years of hard-earned experience in the lab and on the water. Their list of Minn Kota firsts supports this commitment to trolling motor development and the fishing community. Today, Minn Kota is the unquestioned leader in the trolling motor industry, enjoying dominant market share in both bow-mount and transom-mount motors.
|
|
|
Pontoon PowerDrive™ 70 Trolling Motor with Foot Pedal - 24V - 70LB - 48"
Put Minn Kota power to work on your pontoon. You get a quiet, steady, all-day performance that's right for you. And with quick and easy mounting, you get a motor that's built to let you sit back and appreciate a perfect day on the lake.
Deploy-Assist Lever
Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.
Aluminum Quick Release Bracket
Quickly, easily remove your motor with this aluminum bracket. It comes standard on PowerDrive Pontoon models and features a quiet, secure locking system.
PowerDrive Foot Pedal
Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Not included on GPS-enabled models.
Push-to-Test Battery Meter
Press a button to get an instant "stage of charge" reading.
Digital Maximizer™
Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Power Prop
Delivers extra power to push through any fishing scenario and excels in open water.
Indestructible Composite Shaft — Guaranteed for Life
At the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.
Cool, Quiet Power
Every Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.
What's Included
Pontoon PowerDrive 70 lb. 48" Foot-Control Motor, Corded Foot Pedal, MKP-37 Prop, MKA-16-03 Quick Release Bracket and Mounting Hardware
Specifications:
For Use In: Freshwater
Shaft Length (inch): 48"
Max Thrust (pounds): 70 lbs.
Voltage: 24
One-Boat Network Compatible: No
QUEST Series: No
Spot-Lock: No
Built-In Sonar: None
Foot Pedal Style: Side-to-Side / Electric
Control: Foot Pedal
Auto/Stow Deploy: No
Power Trim: No
Power Steering: Yes
Lift-Assist: No
Bowguard: No
Wireless Remote: No
i-Pilot Link (GPS): No
i-Pilot (GPS): No
AutoPilot: Yes
CoPilot: No
Speeds: Variable
Digital Maximizer: Yes
Battery Meter: Yes
Max Amp Draw: 42
Mount Style: Bolt-on
Mounting Location: Bow-mount
Motor Style: Electric-steer
Prop: Power Prop (MKP-37)
Warranty: Two-Year Warranty
|
1218.08 |
|
|
Don't miss out on Minn Kota's Endura Transom Mount trolling motors promotion now until June 15th, 2008. For all the detail please check out our Rebate Corner.
|
|
|
RAPTOR IS RELENTLESS
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
FIND THE RAPTOR FOR YOUR RIG
Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.
JUST THE RIGHT AMOUNT OF HOLD
Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.
Specials Closeouts Remanufactured Rebates
|
|
|
RAPTOR IS RELENTLESS
Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you're anchoring, what's happening to your boat, and what to do next. It reads the bottom, senses the anchoring force and reacts automatically to keep you locked down until the moment you're ready to change spots. Legendary Minn Kota durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.
FIND THE RAPTOR FOR YOUR RIG
Raptor shallow water anchors install hydraulically and can anchor down to 8' or 10'. Match your boat with black, red, silver, and white models.
JUST THE RIGHT AMOUNT OF HOLD
Select Raptor models features Active Anchoring, This revolutionary anchoring technology continuously monitors anchoring force and adjusts to keep you pinned to the bottom.
Specials Closeouts Remanufactured Rebates
|
|
|
Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" Spacing
The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions
The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
|
110.78 |
|
|
Troll-Tamer™ for Minn Kota Maxxum Trolling Motor Stabilizer Lock 5"-8" Spacing
The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions
The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.
|
110.78 |
|