MKA-62 Cable-Steer Quick Release Bracket For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet, secure locking system. Fits 52" to 72" shaft foot-control motors and 62" shaft hand-control motors. They are designed to handle the increased torque of QUEST series motors. Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 52" to 72" shaft, foot-control motors, and 62" shaft hand-control motors

MKA-32 Electric Steer Quick Release Bracket with Cover  Features: Designed for fast removal of any Terrova™, PowerDrive™ V2, or PowerDrive bow-mount trolling motor Cam-lock design features ultra-tight tolerances that eliminate bracket movement and noise The locking lever includes a pin and lanyard Upper and lower plates include slots for securing with a padlock (not included) Includes a composite cover that attaches to the lower half of the bracket when the motor is removed, keeping the deck profile clean WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RTA-61 Cable-Steer Quick Release Bracket For quick, easy removal of your cable-steer, bow-mount trolling motor. The extruded aluminum design with side screws provides a quiet and secure locking system. Fits foot control motors with up to a 45" shaft and hand control motors with up to a 52" shaft. They are designed to handle the increased torque of QUEST series motors. Features: Recommended for the higher thrust associated with Ultrex™ QUEST™ series motors Allows trolling motors to be quickly removed from and reattached to the boat deck Top and bottom plates slide together and are tightened/secured to one another using dual-locking hardware Solid, anodized aluminum construction Includes both 5/16" and 1/4" stainless steel mounting hardware Brackets can be secured with a padlock (not included) for additional security Fits 45" shafts and smaller foot-control motors and 52" shafts and smaller hand-control motors

MKA-58 Boat Deck Reinforcement Kit Provides additional strength, stability, and versatility for mounting Minn Kota Quest series RT Instinct, Ulterra, Terrova, and RT Terrova trolling motors. Features: Provides additional strength and stability for mounting Minn Kota Quest series trolling motors Helps to distribute torque loads associated with higher thrust motors Can be installed directly to the boat deck or in combination with MKA-56 / RTA-55 quick-release bracket Multiple mounting hole patterns allow for flexible installation Includes stainless steel hardware Designed for use in saltwater Compatible with Ulterra, Terrova, Riptide Terrova, and Riptide Instinct QUEST series trolling motors

MKA-21 Composite Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.  Features Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the MKA-53 model. Designed for use in freshwater WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-16-03 Quick Release Bracket For quick, easy removal of your electric-steer, bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system. Compatible with Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40. - Allows trolling motor to be quickly removed from and reattached to boat deck - Sidescrew design attaches trolling motor to top bracket and slides into - deck-mounted bottom bracket, secured with tightening screw - Solid, anodized aluminum construction - Includes stainless steel mounting hardware - Brackets can be secured with padlock (not included) for additional security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-56 Quick Release Bracket Easily remove your electric steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and is specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. The locking handle with stainless steel pins can be secured with a padlock (padlock not included, sold separately). Features: Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

MKA-51 Quick Release Bracket The bracket and top plate allows you to easily slide the motor inboard (up to 6"), or easily remove it for storage and security. Features corrosion-resistant anodized aluminum construction with stainless steel hardware. Compatible with Ulterra™, Terrova®, PowerDrive™, PowerDrive V2 and DeckHand 40. Features: Slide motor inboard 6” for a better boat cover fit and more clearance when launching boat Allows trolling motor to be quickly removed from and reattached to boat deck Cam-lock design reduces bracket movement and noise Includes stainless steel mounting hardware, lanyard, and locking pin Upper and lower plates include slot for securing with padlock (not included) for added security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-57 Quick Release Bracket The bracket and top plate allow you to easily slide the motor inboard (10") or easily remove it for storage and security. Features anodized aluminum construction with stainless steel components and hardware for optimal corrosion protection in all saltwater or freshwater environments. Features: Slide motor inboard 10" for a better boat cover fit and more clearance when launching the boat Designed specifically for motors featuring QUEST technology to meet the increased stress created by high-thrust motors and long shaft lengths Allows trolling motors to be quickly removed from and reattached to the boat deck The dual Cam-lock design reduces bracket movement and noise Includes stainless steel mounting hardware, a lanyard, and a locking pin Upper and lower plates include slots for securing with a padlock (not included) for added security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

MKA-64 Quick Release Bracket Easily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors. Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security Designed for use in freshwater

RTA-62 Quick Release Bracket Easily remove your electric steer, bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" and 87" shaft trolling motors. Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security. Designed for use in freshwater or saltwater

MKA-42 Quick Release Bracket For quick, easy removal of your Fortrex or Maxxum bow-mount trolling motor. Extruded aluminum design of these brackets features a side screw that provides a quiet and secure locking system. Ultra-tight tolerances eliminate bracket movement and noise. Fits 42" shaft foot control motors, 42" and 52" shaft hand control motors. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MKA-49 Cable & Handle For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design with an ultra-strong, abrasion-resistant, coated stainless steel braided cable. Features: Compatible with cable steer bow-mount motors: Fortrex, Maxxum, Edge, Riptide SF, Riptide SM and Riptide SE WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RTA-55 Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor featuring QUEST technology. High-yield composite construction is super strong and impervious to corrosion and specifically designed for higher thrust motors and longer shaft lengths. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).  Designed specifically for motors featuring QUEST technology to meet the increased stress created by high thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration Locking handle can be secured with padlock (not included) for additional security Compatible with electric steer motors featuring QUEST technology Designed for use in freshwater or saltwater

RTA-17 Composite Quick Release Bracket Easily remove your electric-steer, bow-mount trolling motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included, sold separately).NOTE: Not for use with 72" shaft length motors.  Features: Allows trolling motor to be quickly removed from and reattached to boat deck Low-profile design attaches trolling motor to top bracket and drops in over deck-mounted puck Composite construction resistant to rust, corrosion, and discoloration Includes stainless steel mounting hardware and locking pin Locking handle can be secured with padlock (not included) for additional security Compatible with Riptide Ulterra, Riptide Terrova, Riptide ST, Riptide PowerDrive, and Riptide SP NOTE: Not for use with any 112 lbs. thrust motors or any motor with a shaft length of 72” or longer. Instead use the RTA-54 model. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.