4 LED Marine Cube Light - 3" SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W CREE LEDs) Raw Lumens: 960 Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .9amps at 13.8 volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Marine Cube Light - Flush Mount - 3" SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W CREE LEDs) Raw Lumens: 960 Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Lens Material: PC Mounting Bracket: Flush Mount Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 and includes a gasket and cut out template OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .9 amps at 13.8 volts per cube IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Marine Cube Light - Flush Mount - 3" SPECS Input Voltage: 10-30V DC Wattage: 18W (6-3W CREE LEDs) Raw Lumens: 1440 Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Lens Material: PC Mounting Bracket: Flush Mount Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 and includes a gasket and cut out template OPERATION Operating Temperature: -40degC to +60degC Current Consumption: 1.2 amps at Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" - 2 Pack Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Blackout Cube LED Light *2-Pack Heise’s Blackout Series high output cube LED lights are small but powerful for better coverage at night. These next-generation lights have refined frames and cleaner lines for a sleek yet minimalistic look. The upgraded optics have changed from a direct to an indirect placement allowing more control of the location and pattern of the beam. This allows the lights to be tailored to the vehicle, its entire lighting system, and for the driver’s lighting coverage needs. Each set is rated IP67 and includes a dual light wiring harness (HE-DLWH1) for installation. Flush mount options are also available and sold individually (without harness). Features: 2 Light Pack Input Voltage: 12-24V Dc Color Temperature: 5700K Beam Pattern: 10o Spot Housing Material: Die-Cast Aluminum Color: Black Lens Material: Polycarbonate Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 Operating Temperature: -40°F To +140°F Protection: Reverse Polarity Mounting: Side & Rear Limited Lifetime Warranty Specifications: Size: 2.5” 4 LEDs Wattage: 20W Raw Lumens: 1,920lm Lux at 10m: 635 Current Consumption @ 13.8V: 1.3A IP Rating: IP67 *Values are for a single light  Vehicle Applicatins: Universal *WARNING: THIS LIGHTING PRODUCT IS SOLD FOR OFF-ROAD USE ONLY. This product should not be used on the road. Owners should keep the original factory bulbs so that they can replace them for use on public roads. Keep the box that the new bulbs came in to store the bulbs and be sure to handle them with care when removing and re-installing.

4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Raw Lumens: 960 Each LUX @ 10M: 380 Color Temperature: 6000K Beam Pattern: 8° Spot CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Row Marine LED Light Bar - 8" SPECS Input Voltage: 10-30V DC Wattage: 36W (12-3W CREE LEDs) Raw Lumens: 2880 Color Temperature: 6000K Beam Pattern: Combo/Flood(90deg)/Spot(8deg) CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Membrane: Gore™ Lens Material: PC Mounting Bracket: Die-cast Aluminum Hole Dimensions: Brackets turned inward – 7.25in Brackets turned outward – 9.5in Mounting Bolt Drill – .25in Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC Current Consumption: 1.9 amps at 13.8 volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Dual Row Marine LED Light Light Bar - 14" SPECS Input Voltage: 10-30V DC Wattage: 72W (24-3W CREE LEDs) Raw Lumens: 5400 Color Temperature: 6000K Beam Pattern: Combo/Flood(90deg)/Spot(8deg) CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Membrane: Gore™ Lens Material: PC Mounting Bracket: Die-cast Aluminum Hole Dimensions: Brackets turned inward – 13.50in Brackets turned outward – 14.75in Mounting Bolt Drill – .25in Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC Current Consumption: 3.7amps at 13.8 volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Armor Underwater LED Light - 3 LEDs - Blue Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Armor Underwater LED Light - 3 LEDs - Green Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Light Armor Underwater LED Light - 3 LEDs - White Light Armor Underwater Lights from Attwood, a line of premium surface-mount LED lights that are engineered to be the brightest and most durable lights in the industry. Like all Light Armor products, they're technically advanced, built to perform in the harshest marine environments, and backed by an industry-leading 10-year warranty. Intelligently Engineered for Strength and Durability Exclusive Heat-Sync Cooling System with Active Overheat Protection Resistant to corrosion, chemicals, and UV Damage Extreme impact-resistant lens 3' sheathed wire Reverse polarity protection Fully-sealed waterproof electronics Simple installation with minimal mounting hardware Low-profile design Electro-polished 316 stainless steel cover WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2" Marine LED Pod Light - Flood Optics - White Housing - Pro Series 3.0 The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white marine POD provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine-rated, all backed by Black Oak's limited lifetime warranty. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Sheer Power This light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs!  Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Marine LED Pod Light - Diffused Optics - White Housing - Pro Series 3.0 The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white diffused POD LED provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine rated, all backed by Black Oak’s limited lifetime warranty. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Sheer Power This light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs!  Features: Diffused lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with diffused optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Marine LED Pod Light - Spot Optics - White Housing - Pro Series 3.0 The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white diffused POD LED provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine rated, all backed by Black Oak’s limited lifetime warranty. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Sheer Power This light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs!  Features: Spot lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with spot optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual