|
4 LED Cube Light - Flood - 3" - 2 Pack
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
169.08 |
|
|
4 LED Cube Light - Flood - 3"
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.32 |
|
|
6 LED Cube Light - Flood Beam - 3" - 2 Pack
Heise HE-DLWH1 Dual Light Wiring Harness Included
Advanced thermal management- short circuit and open circuit protection and many other innovative features.
Surface mount and flush mount LED cubes give you tons of options for every application you need.
SPECS
Input Voltage: 10-30V DC
Power Consumption: 12W Each
Pair (4-3W CREE LED)
Lumen Flux: 900lm Each
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
183.74 |
|
|
4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack
Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Raw Lumens: 960 Each
LUX @ 10M: 380
Color Temperature: 6000K
Beam Pattern: 8° Spot
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
178.51 |
|
|
6 LED Cube Light - Flood Beam - 3"
Advanced thermal management- short circuit and open circuit protection and many other innovative features
Surface mount and flush mount LED cubes give you tons of options for every application you need
SPECS
Input Voltage: 10-30V DC
Power Consumption: 18W
(6-3W CREE LED)
Lumen Flux: 1440lm
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.60 |
|
|
4 LED Marine Cube Light - 3"
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W CREE LEDs)
Raw Lumens: 960
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: .9amps at 13.8 volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
69.94 |
|
|
Blackout LED Cube Light - Flush Mount - 3"
SPECS
Input Voltage- 10-30V DC
Wattage- 12W
(4-3W CREE LED)
Raw Lumens- 960
LUX at 10M- 17
Color Temperature- 6000K
Beam Pattern- 90 degree Flood
CONSTRUCTION
Housing Material- Die-cast Aluminum Housing
Housing Color- Black
Lens Material- PC
Mounting Bracket- Flush Mount
Electronics- Integrated-Epoxy Encapsulated
Hardware- Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature- -40 degree C to +60 degree C
Current Consumption- .9 amps @ 13.8 volts
IP Rating- IP68
Protections- Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
80.69 |
|
|
3" 4 LED Cube Light - 2-Pack
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
239.04 |
|
|
3" 4 LED Cube Light
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
67.51 |
|
|
D-SS Driving, Spot & Flood LED Lights
One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.
The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.
The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.
Ignite Surface Mount Diffused, Flood & Spot LED Lights
The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.
The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.
*Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.
Specials Closeouts Remanufactured Rebates
|
|
|
Lumishore's SMX90-CS, adds a multi-color surface mount underwater light to Lumishore's extensive true color change product line. HICOB (High Intensity Chip On Board) light engine combines high power LEDs, advacnced thermal management and intelligent driver electronics into a low profile, corrosion proof, advanced polymer body. Additional individual lights can be added to the system, up to four controlled by one switch.
Some Exciting SMX90-CS Features Include:
-Four Preset Colors: Blue, White, Green and Cyan, all from a single light fixture
-Two strobe speeds (any color)
-Light output equivalent to a 75W underwater light
-Simple installation with no external driver
-Wide 90 degree beam provides "Swimming Pool" effect, reducing the number of lights required per installation
-Supplied with light(s) and a rocker switch
|
|
|
4 LED Marine Cube Light - Flush Mount - 3"
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W CREE LEDs)
Raw Lumens: 960
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Lens Material: PC
Mounting Bracket: Flush Mount
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: .9 amps at 13.8 volts per cube
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.56 |
|
|
Pro Series 3.0 Curved Double Row 10" LED Light Bar - Combo Optics - Black Housing
This 10-inch curved double-row light bar isn't one to be underestimated. It may be smaller than its bigger brothers, but man does it still pack a punch. If users drive an ATV, UTV, or bike, then this curved LED light bar was made for them. The slight curve of the ATV LED bar spreads the light across a broader plane than the straight, but still gives users the flood, spot, or combo light pattern to completely customize this curved light bar for what users need it for.
Black Oak will put this 10-inch LED light bar against any of the company's big boys and expect the same result at the end of the day. Throw it into a full tub of water, hit it with a bat, and run it over with a truck. This dual-row LED will shine just as brightly as its high-end Osram LEDs. Also, Black Oak guarantees all ATV light bars with an LLT warranty.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Premium Dupont powder-coating for the highest quality and most resistant finish
Combination Flood/Spot light pattern offers a superior lighting pattern
Multi-mount brackets made of 9 gauge marine grade Stainless Steel
Lens cover made of Lexan with a UV protectant
Activities & Uses:
Perfect duck boat bow light
Marine Spot light
ATV or UTV brush guard lights
Front bumper truck lights
Technical Specifications:
Total Wattage: 100W
Amp. Draw: 4.1
LED Quantity: 20
Weight: 5.2 lbs.
Raw Lumens: 13,200
Warranty: Lifetime
IP Rating: IP69K
Connection: Deutsch connector
Dimensions with Mounting Bracket (Width x Height) – 11.4" x 4.125"
In the Box:
Light bar
Complete wiring harness with fuse, relay, and switch
12 gauge wire
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
348.60 |
|
|
2" LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0
The Cree flood light pod by Black Oak LED offers two levels of power to fill any need users might possibly have. This CREE LED floodlight delivers extreme IP69K durability to match such high-performance LEDs, allowing users to have confidence that their lights are going to perform when needed.
Cree and Osram are the biggest names on the LED market for a reason. The Cree flood lights put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. These mount virtually anywhere, and with all the hardware needed in the box, this CREE LED floodlights is ready to go.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Fog light replacements
Bow light's on flats boats with trolling motor
Lower A-Pillar ditch lights on UTV's and trucks
Trailer lighting
Front bumper lights
Auxiliary motorcycle lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
116.10 |
|
|
Pro Series 3.0 Double Row 4" LED Light Bar - Flood Optics - Black Housing
Sometimes, great things come in small packages. If users are looking for a compact, affordable light bar that will still light up the road with blinding clarity, then this Black Oak 4-inch dual-row LED light bar is the perfect choice. This light bar has a flood-optic pattern.
Made from two rows of ultra-bright Osram LEDs (eight LEDs in total), this light is able to produce a total of 2,240 beaming lumens of light, making it one of the brightest 4-inch LED light bars on the market.
Along with being bright, our 4-inch LED light bar is made to withstand all the punishment of a rough backroad as well. Constructed using only the finest materials and most proven manufacturing processes in the industry, this small LED light bar has achieved a security rating of IP69K (the highest possible), is E-Mark Certified, and has passed United States military standards, meaning it is able to take all the abuse an off-road outing can throw, including full water immersion and jarring bumps and jolts. Even through all of this, Black Oak's small LED light bar still maintains an average lifespan of 50,000 hours of continuous use and is backed by Black Oak's limited lifetime warranty and industry-leading money-back guarantee.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Premium Dupont powder-coating for the highest quality and most resistant finish
Flood light pattern
Multi-mount brackets made of 9 gauge marine grade Stainless Steel
Lens cover made of Lexan with a UV protectant
Activities & Uses:
Perfect Jon boat bow light
Motorcycle fork light
ATV rack or bumper lights
Front bumper flood lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 1.5
LED Quantity: 8
Weight: 4 lbs.
Raw Lumens: 5,280
Warranty: Lifetime
IP Rating: IP69K
Connection: Deutsch connector
In the Box:
Light bar
Complete wiring harness with fuse, relay, and switch
12 gauge wire
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
193.20 |
|