|
Multi-Function Battery Operated Sport Flood Light
Attwood's Multi Function Sport Light is a durable multi purpose light for fishing, boating, hunting, camping and more. Seven hour battery life off of 6 AA (not included) . Constructed out of water resistant material. Four different mounting options. Includes an adapter that is compatible with the Attwood rod holder mount. Provides white, red and ultraviolet light. Up to 300 lumens of power.
Battery operated (6 AA)(Not Included
White / red / ultraviolet light
Up to 300 lumens
7 hour battery life
Four Mounting Options
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
44.30 |
|
|
Multi-Function Battery Operated Sport Flood Light - Camo
Attwood's Multi Function Sport Light is a durable multi purpose light for fishing, boating, hunting, camping and more. Seven hour battery life off of 6 AA (not included) . Constructed out of water resistant material. Four different mounting options. Includes an adapter that is compatible with the Attwood rod holder mount. Provides white, red and ultraviolet light. Up to 300 lumens of power.
Battery operated (6 AA)(Not Included
White / red / ultraviolet light
Up to 300 lumens
7 hour battery life
Four Mounting Options
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.38 |
|
|
Portable Navilight 360° 2NM - White w/Bendable Suction Cup Mount
The Navilight 360° 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It uses super bright LED light, is waterproof, floats and attaches almost anywhere through its double magnetic mounting system.
Examples of Usage:
*Based on the Convention of the International Regulations for Preventing Collisions at Sea
On a power-driven vessel underway of 12 meters or more in length but less than 50 meters in length:
Sternlight
All-round white light
On a power-driven vessel underway of less than 12 meters in length:
Masthead light
Sternlight
All-round white light
On a power-driven vessel underway of less than 7 meters in length whose maximum speed does not exceed 7 knots:
All-round white light
Rowing/Paddle Vessels
All-round white light
Anchored vessels and vessels aground
Anchor lights must always be shown from sunset to sunrise
All-round white light
Specifications:
USCG Approval, 2 Nautical Miles
5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light
Floatable, waterproof (20 m) and air-tight
Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
Powered by three AAA batteries (not included)
Size: H = 35 mm, Diameter = 68 mm
Weight (net): 113 g
Modes / approximate burn time:
16 white LED, 360° All-round light, Anchoring light / 15hrs
16 white LED, 360° Flashing light / 85hrs
10 white LED, 225° Masthead light / 24hrs
6 white LED, 135° Sternlight / 32hrs
4 white LED, 360° Cabin light / 72hrs
Bendable Suction Mount
Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.
Examples of Usage:
Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:
The outboard engine
The steering console, the windshield or any place on the hull where the lights are seen best
On canoes and kayaks with a smooth and flat surface
Specifications:
Secure suction cup base
Quick release suction cap
Bendable shaft moves through 180°
Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
Size: L = 68mm, H = 157mm
Weight (net): 80g
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
116.96 |
|
|
Navilight All-White 5 Mode 360 Degree 2NM with Magnet Base
The Navilight 360° 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It uses super bright LED light, is waterproof, floats and attaches almost anywhere through its double magnetic mounting system.
Examples of Usage:
*Based on the Convention of the International Regulations for Preventing Collisions at Sea
On a power-driven vessel underway of 12 meters or more in length but less than 50 meters in length:
Sternlight
All-round white light
On a power-driven vessel underway of less than 12 meters in length:
Masthead light
Sternlight
All-round white light
On a power-driven vessel underway of less than 7 meters in length whose maximum speed does not exceed 7 knots:
All-round white light
Rowing/Paddle Vessels
All-round white light
Anchored vessels and vessels aground
Anchor lights must always be shown from sunset to sunrise
All-round white light
Specifications:
USCG Approval, 2 Nautical Miles
5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light
Floatable, waterproof (20 m) and air-tight
Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
Powered by three AAA batteries (not included)
Size: H = 35 mm, Diameter = 68 mm
Weight (net): 113 g
Modes / approximate burn time:
16 white LED, 360° All-round light, Anchoring light / 15hrs
16 white LED, 360° Flashing light / 85hrs
10 white LED, 225° Masthead light / 24hrs
6 white LED, 135° Sternlight / 32hrs
4 white LED, 360° Cabin light / 72hrs
Mounting System
The double magnetic system consists of the Navilight with its magnetic base, a separate magnetic plate and a screw for attaching the plate to a wooden deck for example. It also holds the light safely on many plastic boats, biminis or any other material by placing the light on top and the magnetic plate underneath. Additionally Navisafe offers a wide range of specially designed magnetic mountings such as the Clamp-on Rail mount, Bendable Suction-mount and the Telescopic Poles that easily allow the lights to be attached.
|
82.00 |
|
|
Navilight All-White 5 Mode 360° 2NM with RAILBLAZA Base
The Navilight All-Around white RB 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It is battery operated, uses super bright LED light, is water proof, floats and is fully compatible with the RAILBLAZA StarPort Mounting system. RAILBLAZA is a New Zealand based supplier of one of the most versatile and EASY-TO-USE Mounting systems for boats, ATVs, RVs or trailer. The base of the Navi light has the form of a star and will fit directly in many Anchor Winches and Winches as well as to specially designed mountings, such as the Navisafe RAILBLAZA Sideport, the Navisafe RAILBLAZA Starport and the Navisafe RAILBLAZA RailMount.
Examples of Usage:
*Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs.
On a power driven vessel underway of 12M or more in length but less than 50M in length:
Sternlight
All-round white light
On a power driven vessel underway of less than 12M in length:
Masthead light
Sternlight
All-round white light
On a power driven vessel underway of less than 7M in length whose maximum speed does not exeed 7 knots:
All-round white light
Rowing / Paddle vessels:
All-round white light
Anchored vessels and vessels aground:
Anchor lights must always be shown from sunset to sunrise.
All-round white light
|
71.12 |
|
|
Corsica Spreader Light - Spectrum Halo
Sleek, clean and powerful, the Corsica Flood Light is our newest addition to the mold-in Contour series. Corsica’s design allows it to be sculpted into hardtops, wheelhouses or arches for a cohesive and integrated look. Corsica delivers more than 1,200 darkness piercing lumens and is our first light to feature the all new Spectrum Halo™. Spectrum Halo™ casts an even, dimmable, colored glow while enhancing a vessel’s nighttime aesthetics. TTP and PLI enabled, Corsica can be controlled with any normal on/off switch and and is also compatible with our Poco Digital Lighting Control System.
Features:
The Corsica designs allows to sculpted into hardtops
More than 1200 lumens
Compatible with POCO Digital Control System
Made in USA
3-Year Warranty
Specifications:
5.76” W X 2.8” H X 4.1” D
Voltage 10-30vDC
Amp Draw 1A @ 12V
Amp Draw .5A @ 24V
Lumens 1200 +
Full WRGB
5000 CCT
|
169.06 |
|
|
Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.
For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.
Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.
Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.
In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.
When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.
Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White
One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.
ACR RCL-300 Remote Controlled Searchlight - 12V/24V
The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.
Underwater Lighting
Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue.
XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.
For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.
Fair Winds, Smooth Sailing.
____________________________________________________________________________________________________
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
D-SS Driving, Spot & Flood LED Lights
One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.
The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.
The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.
Ignite Surface Mount Diffused, Flood & Spot LED Lights
The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.
The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.
*Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.
Specials Closeouts Remanufactured Rebates
|
|
|
Safety First when it comes to Trailer Lighting
Safety is important, not only on the water, but on the road going to and coming from the water. If your trailer is more than a few years old, most likely you have had or are having some issues with the lights and the electrical system on your trailer. Fortunately, most issues are pretty easy to fix.
The first thing to do is to test the lights by hooking up to the vehicle harness and checking all lights to make sure they are bright and working. If any are dim or not functioning, connect a tester to the vehicle harness to see if there might be an issue with the electrical source. Cleaning the connectors of the harness on both the vehicle and trailer side is critical, and can easily be done with a can of electrical connector spray and a fine wire brush. Also, clean the ground contact and tighten the ground wire.
Make sure to check the ground screw and replace it if it is corroded. Most bulbs are easily replaceable by simply twisting them to remove and install them. You can also clean up corroded sockets by gently sanding away the corrosion with fine sandpaper. It's possible you may have to replace wiring, which can be purchased as part of a complete kit that includes new lights, connectors, and lenses.
We suggest if you do not have LED light on your trailer to switch over to them. Led lights are brighter, more efficient and has multiply bulbs so you will never have a taillight completely unlit if one bulb burns out.
CLR Marine carries trailer lights and lighting kits, which are complete with license plate holder, wiring and side lights. Along with any other trailer accessory you may need.
Specials Closeouts Remanufactured Rebates
|
|
|
Eagle Ray LED Light Bar - White Housing & Dual Optics
Utilizing automotive lighting technology and novel beam shaping optics, Shadow-Caster has created the Eagle Ray – a unique light bar with a combination of focused laser-driven white light beams and a wide 60-degree LED flood array to efficiently light the way.
The focused white lights are ideal for long-distance viewing and penetrating fog, rain, and mist. The beam angle and brightness are adjustable with a push button or the Shadow-Caster® NMEA 2000 Light Commander interface.
Laser Features:
Automotive-grade laser-driven white lights
Blue halo illumination around optics indicates a power state
Adjustable 5-100° beam angle control with a switch or MFD interface
Flood Features:
24 bright white LEDs
Blue accent light strips indicate the brightness level
60-degree beam angle
Adjustable brightness control with a switch or MFD interface
Technical Information:
20,000 lumens
Billet Aluminum housing in white finish
Remote power trigger to provide simpler installation (main current supply is not controlled through a switch)
Borosilicate glass window
10-30V input
200W max power
16.5A current draw at 12V DC
2.5” H x 20” W x 5.4” D [65.3 x 506.5 x 136.9mm]
Control Options
On/off Push Buttons
Click the on/off button to turn the laser/flood lights on. Press and hold the button to adjust the beam angle (laser) or brightness (flood). Click the on/off button to turn the laser/flood lights off.
Standard Marine Rocker Switch
Click the rocker switch up/down button to turn the laser/flood lights on. Press and hold the switch up/down to adjust the beam angle (laser) or brightness (flood). Click the rocker switch up/down button to turn the laser/flood lights off.
Shadow-NET®/ NMEA 2000 Control
Full feature control through a Multi-Function Display (MFD). The Shadow-NET® Light Commander allows for easy and independent control of brightness and beam angle for the Eagle Ray Light Bar. Create and store pre-configured light settings for use as part of a lighting ‘scene’ for convenience at night.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2158.80 |
|
|
Eagle Ray LED Light Bar - Black Housing & Dual Optics
Utilizing automotive lighting technology and novel beam shaping optics, Shadow-Caster has created the Eagle Ray – a unique light bar with a combination of focused laser-driven white light beams and a wide 60-degree LED flood array to efficiently light the way.
The focused white lights are ideal for long-distance viewing and penetrating fog, rain, and mist. The beam angle and brightness are adjustable with a push button or the Shadow-Caster® NMEA 2000 Light Commander interface.
Laser Features:
Automotive-grade laser-driven white lights
Blue halo illumination around optics indicates a power state
Adjustable 5-100° beam angle control with a switch or MFD interface
Flood Features:
24 bright white LEDs
Blue accent light strips indicate the brightness level
60-degree beam angle
Adjustable brightness control with a switch or MFD interface
Technical Information:
20,000 lumens
Billet Aluminum housing in black finish
Remote power trigger to provide simpler installation (main current supply is not controlled through a switch)
Borosilicate glass window
10-30V input
200W max power
16.5A current draw at 12V DC
2.5” H x 20” W x 5.4” D [65.3 x 506.5 x 136.9mm]
Control Options
On/off Push Buttons
Click the on/off button to turn the laser/flood lights on. Press and hold the button to adjust the beam angle (laser) or brightness (flood). Click the on/off button to turn the laser/flood lights off.
Standard Marine Rocker Switch
Click the rocker switch up/down button to turn the laser/flood lights on. Press and hold the switch up/down to adjust the beam angle (laser) or brightness (flood). Click the rocker switch up/down button to turn the laser/flood lights off.
Shadow-NET®/ NMEA 2000 Control
Full feature control through a Multi-Function Display (MFD). The Shadow-NET® Light Commander allows for easy and independent control of brightness and beam angle for the Eagle Ray Light Bar. Create and store pre-configured light settings for use as part of a lighting ‘scene’ for convenience at night.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2158.80 |
|
|
Single Zone Lighting Control
Simply toggle power to set color and brightness and to select multiple fade modes.
The Shadow-Caster® single-zone lighting controller is a low-cost, marine-grade RGBW LED controller that can be operated from a standard switch. Simply toggle power to set color and brightness. The SCM-SNLC also has a built-in Shadow-NET® interface that allows the controller to synchronize color and lighting control with other Shadow-NET® devices. This enables a convenient way to make Shadow-Caster® underwater lights match the color of interior RGBW lighting.
The SCM-SNLC control also has a built-in ShadowNET® interface that allows the controller to synchronize color and lighting with other ShadowNET® devices. This provides a convenient way to make Shadow-Caster® underwater lights match the color of interior RGBW lighting.
Shadow-NET® is a multi-channel communications platform created by Shadow-Caster® to allow seamless integration and control of all of your boat’s lighting.
For use with fishing boats, pontoon boats, sports boats, and yachts.
Features:
Selectable RGB or RGBW output to support an optional white channel
Color-coded connections make for easy installation
Integrated Shadow-NET® interface broadcasts lighting commands to synchronize other Shadow-NET® enabled lighting products such as underwater lights and downlights
This device can be added to an existing Shadow-NET® network as an additional RGBW zone
Control brightness, color, and select multiple fade modes • Compatible with RGBW strips from other manufacturers
Internal RGBW backlight to indicate current color and mode
Exclusive power control technology to mitigate effects of electrical noise
Custom software versions available for boat builder applications
Specifications:
5.2” (132mm) x 2” (51mm) x 2.75” (70mm)
IP65 washdown rated enclosure
10-30 volts input range
Power: Support for 250W of RGBW lighting, 20 amps
ATC fuse for protecting the output
Includes:
Lighting controller
Mounting hardware
Quick start guide
Standard 2-year warranty
|
202.80 |
|
|
Pro Series 3.0 Double Row 20" LED Light Bar - Combo Optics - Black Housing
The 20-inch Double Row Series is Black Oak's most popular light by a landslide! With its compact yet over-achieving attitude, this aggressive dual-row off-road flood light fits literally anywhere! Cars, trucks, snowmobiles, lawnmowers, tractors, trailers, etc. This powerful 100W light bar will send most full-size light bars back home to their momma. With its completely customizable spot, flood, or combo configurations, users control what is needed!
Consisting of a combination of both flood and spot beam pattern LEDs, this 20-inch LED bar is capable of both lighting up objects and potential hazards far down the road as well as providing a wash of light on the sides of a vehicle, making it suited for driving in any number of conditions and scenarios. With a variety of mounting options, this light bar is well suited for Jeep hood mounts, ATVs, trucks, UTVs, motorcycles, boats, heavy equipment, and a variety of other vehicles.
As with all Black Oak LED light bars, this 20-inch dual-row light bar is backed by Black Oak's 30-day money-back guarantee as well as our limited lifetime warranty.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Premium Dupont powder-coating for the highest quality and most resistant finish
Combination Flood/Spot light pattern offers a superior lighting pattern
Multi-mount brackets made of 9 gauge marine grade Stainless Steel
Lens cover made of Lexan with a UV protectant
Activities & Uses:
Off-road Spot light
T-Top boat light
Jeep hood light
UTV dune riding
Ram Rebel grille light
Technical Specifications:
Total Wattage: 200W
Amp. Draw: 8.4
LED Quantity: 20
Weight: 7.8 lbs.
Raw Lumens: 26,400
Warranty: Lifetime
IP Rating: IP69K
Connection: Deutsch connector
Dimensions with Mounting Bracket (Width x Height): 21.4" x 4.125"
In the Box:
Light bar
Complete wiring harness with fuse, relay, and switch
12 gauge wire
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
571.20 |
|
|
Pro Series 3.0 Single Row 6" LED Light Bar - Combo Optics - Black Housing
READY FOR ANYTHING! This light bar is barely even noticeable in a grill, mounted to a bumper, or across the front of a boat or ATV. From bracket to bracket, it spans only 9 inches, so it has an unbelievable amount of applications with its 5 watt spot and flood combo options to blast a path ahead of the user.
With the flick of the switch, users can see that this light is built with quality parts. From the moment users put the 6-inch single-row LED light bar in their hands, it becomes completely clear how this light can take the beating Black Oak claims it can. This affordable LED light bar comes complete with a wiring harness, stainless steel brackets and hardware, relay, fuse, and water-resistant switch. Everything users need to mount and get going right when the light arrives!
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Combination Flood/Spot light pattern offers a superior lighting pattern
Multi-mount brackets made of 9 gauge marine grade Stainless Steel
Activities & Uses:
UTV reverse flood light
Headache rack lighting
ATV spot light
Motorcycle lighting
Technical Specifications:
Total Wattage: 30W
Amp. Draw: 2.4
LED Quantity: 6
Weight: 1.6 lbs.
Raw Lumens: 3,960
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 9" x 2.6"
In the Box:
Light bar
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware is ready to install!
*Sold as an Individual
|
172.20 |
|
|
Caprera3 Spreader Light - Spectrum - White Housing
Now with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.
Features:
The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread.
Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control.
Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop.
Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop.
Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app.
Specifications:
COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum
LUMENS: 1,200+ TRUE measured lumens
VOLTAGE: 10-30vDC
12VDC: 1A
24VDC: 0.5A
CCT: 5000
CRI: 70+
BEAM PATTERN: Flood
|
151.14 |
|