LED Starr Light - Recess Mount Operates 9-16 Volt DC Systems Rated @ 100,000 Hours of Service Life Requires 1.25" Hole Shock and Vibration Proof Cool to the Touch No Corrosion Rated for Underwater Use 3 LEDs 1.82" x 1.85" LED Color: White WARNING: This product can expose you to chemicals including STYRENE,Acrylonitrile which are known to the State of California to cause cancer, and 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Starr Light - Recess Mount Operates 9-16 Volt DC Systems Rated @ 100,000 hours of service life Requires 1.25" Hole Shock and Vibration Proof Cool to the Touch No Corrosion Rated for Underwater Use 3 LEDs 1.82" x 1.85" LED Color: Blue WARNING: This product can expose you to chemicals including STYRENE,Acrylonitrile which are known to the State of California to cause cancer, and 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Maxillume tr150 LED Flood Light - Recessed Mount Rugged, reliable, with 20,000 measured lumens – the Maxillume tr150 LED work light will change the way you work at night. Your workers will be safer, faster, more effective, and more productive. Completely sealed to IP67 standards. Tested to military specifications for shock and vibration. The member of Lumitec’s Maxillume family is the standard for 150W LED spot/flood lighting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Docking Lights - Stainless Steel - White LED - Pair Compared to its 55-watt halogen competition, the Attwood Surface Mount LED Docking Light draws a fraction of the power while producing a brighter output. The Attwood product also transmits light in a much broader pattern as opposed to a narrow beam generated by today’s competitors. Simply put, Attwood’s docking light performs like a true “docking light” instead of a narrow-beam headlight.  Power draw and performance are important, but what about assembly? At 1.2" thick, the lights are designed to be mounted directly to the surface of the hull. With only a small hole for wiring and three (3) screws for attachment, Attwood’s surface mount design makes installation quick and ncomplicated.  This new LED Docking Light allows for fewer hull cuts and minimal intrusion while producing results that are reliable and attractive. Backed by a 10-year warranty, Attwood’s LED Docking Light is designed and tested for extreme conditions. Attwood used only the highest grade Stainless Steel and aluminum components to ensure the product is resistant to corrosion. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED Courtesy Light - Surface Mount - White The light has an ABS housing featuring a diamond-cut lens and a white snap-on trim ring with white LEDs. It is great for illuminating walkways or steps and is available in 12V only. Features: Blue LEDs with white trim 15 Lumens 12 Volt 0.5 W IP65 *The "P" within the part number indicates retail packaging

4-LED Deck Light - Flat Mount - White Housing Unique, low profile LED multi-purpose deck light designed for flat mount. Ideal for hard tops, consoles, interior cabin, under gunnel. Features: USCG, ISO and SAE certified for Ignition Protection* 10.0 Watt equivalent to a 55 Watt halogen flood light Powerful 700 lumen output with 100° spread beam angle 12-24 volt applications Very low power consumption (0.9 amps @ 12V, 0.5 amps @ 24V) 8' hidden power cable Available mounting options: Stainless Steel Swivel Bracket or 3M adhesive tape Compact design bolts directly to any flat surface 5" long and 1-3/8" width Material Characteristics White or Black UV-resistant Polycarbonate housing Durable and self-extinguishing clear plastic lense Anodized Aluminum heatsink LED chips are silicone potted for IP67 Waterproof (non-submersible) *Completely sealed lights have been tested in an explosive environment and exposed to an explosive atmosphere in high temperature that includes powering on-off 50 times without igniting the atmosphere at a temperature not exceeding 200° C. These certificates demonstrate the ability to consistently provide product that meets statutory and regulatory requirements that assure customer satisfaction and safety. Ideal for use in engine rooms, battery compartments and anywhere fire safety is of most importance.

Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.   For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.   Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.   Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.    In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.   When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.   Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.   ACR RCL-300 Remote Controlled Searchlight - 12V/24V The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.   Underwater Lighting Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue. XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.   For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.     Fair Winds, Smooth Sailing. ____________________________________________________________________________________________________ To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.     Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com  

    Lumishore's SMX90-CS, adds a multi-color surface mount underwater light to Lumishore's extensive true color change product line. HICOB (High Intensity Chip On Board) light engine combines high power LEDs, advacnced thermal management and intelligent driver electronics into a low profile, corrosion proof, advanced polymer body. Additional individual lights can be added to the system, up to four controlled by one switch.     Some Exciting SMX90-CS Features Include: -Four Preset Colors: Blue, White, Green and Cyan, all from a single light fixture -Two strobe speeds (any color) -Light output equivalent to a 75W underwater light -Simple installation with no external driver -Wide 90 degree beam provides "Swimming Pool" effect, reducing the number of lights required per installation -Supplied with light(s) and a rocker switch  

Surface Strip Light w/Switch - White LED - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

3 LED Surface Mount Step Light - White with Black Case Features: Operates 9-16 Volt DC Systems 24 Volt Version Available Rated @ 100,000 Hours of Service Life Shock and Vibration Proof Cool to the Touch Energy Draw 26 Milliamps No Corrosion Potted to Seal Out Moisture 3 LEDs 1.69" x .65" x .40" 

Pro Series 3.0 Double Row 30" LED Light Bar - Combo Optics - Black Housing The 30'' Double Row Series is for users who want a painfully bright LED bar that won't break the bank. This light is perfect for mounting on a lower bumper, behind the grill, or across the top of an ATV and can throw a beam that will illuminate a whole air strip. Don't underestimate it's size.  At almost a meter long, Black Oak's 30" LED light bar has two rows of blindingly bright Osram 5W white LEDs (60 LEDs in total). Equipped with spot, flood and Combination beam pattern, this light bar will light up objects hundreds of yards ahead of a vehicle as well as objects in a vehicle’s blind spots with equal effectiveness, making it perfectly suited for every driving scenario. In order to take all the punishment that an off-road outing can throw, this 30" LED light bar is made using the most durable materials and proven manufacturing processes available today. Through this painstaking construction, this light was able to achieve a security rating of IP69K as well as pass US military standards. Black Oak's 30-inch light bar is completely waterproof, corrosion-resistant, and has an average lifespan of 50,000 hours of continuous use. All said, the 30" LED light bar is almost guaranteed to outlast the vehicle it is mounted on and is backed by Black Oak's limited lifetime warranty and money-back guarantee. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant Activities & Uses:  Off-Road combo light T-Top boat light Behind the grill light bar UTV trail riding Grill guard truck lights Technical Specifications: Total Wattage: 300W Amp. Draw: 12.7 LED Quantity: 60 Weight: 10.8 lbs. Raw Lumens: 39,600 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 31.4" x 4.125" In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual

2" Marine LED Pod Light - Flood Optics - White Housing - Pro Series 3.0 The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white marine POD provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine-rated, all backed by Black Oak's limited lifetime warranty. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Sheer Power This light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs!  Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Marine LED Pod Light - Diffused Optics - White Housing - Pro Series 3.0 The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white diffused POD LED provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine rated, all backed by Black Oak’s limited lifetime warranty. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Sheer Power This light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs!  Features: Diffused lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with diffused optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Marine LED Pod Light - Spot Optics - White Housing - Pro Series 3.0 The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white diffused POD LED provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine rated, all backed by Black Oak’s limited lifetime warranty. Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Sheer Power This light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs!  Features: Spot lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with spot optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual

2" Marine Flush Mount LED Pod Light - Diffused Optics - White Housing - Pro Series 3.0 Extremely Versatile, the Marine Flush Mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything else users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30+ types of harsh conditions. If users are looking at a reverse light or a light for their rear bumper, the Diffused option is the perfect setup, throwing light out in a 120° pattern! This flush-mount LED truck light puts out an unimaginable amount of light, considering its compact appearance.  Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market. Features: Diffused lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Front bumper lighting for trucks and Jeeps Reverse lights Work lights Headache rack lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions (Length x Height): 4-7/8" x 3-5/8" In the Box: 2” flush mount pod light with diffused optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual