|
Engine Room Light - Surface/Flush Mount
This super-bright, vibration-resistant LED light meets the expectations of next-generation vessels, refits, or upgrades. This multi-voltage fixture can be powered by your DC battery system, an AC generator/shore power, or both. If connected to both, the PC board automatically switches to DC power when AC power is lost.
Features:
Includes a trim ring for surface mount installation and stainless steel mounting hardware
Meets Requirements and Standards for SAE J1171 USCG, ABYC & NMMA
IP67
Flush or Surface Mount
Daylight white (6000K)
168 super-bright 2835 LEDs
12/24 VDC and/or 110/220 VAC
Specifications:
Lumens: 3400 (similar to 2 x T8 fluorescents)
Beam Angle: 120°
Watts: 42
*The "P" within the part number indicates retail packaging
|
221.75 |
|
|
Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.
For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.
Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.
Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.
In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.
When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.
Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White
One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.
ACR RCL-300 Remote Controlled Searchlight - 12V/24V
The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.
Underwater Lighting
Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue.
XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.
For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.
Fair Winds, Smooth Sailing.
____________________________________________________________________________________________________
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
E360 Engine Room Light - 12V - Cool White
The E-3600 is a surface-mounted engine room light. The impact-resistant PC lens allows the wires to exit straight back through the mounting surface or be routed to the side through the end cap. Featuring a total of 36 LEDs, this fixture produces 1,154 lumens, comparable to a 160-watt standard bulb. Drawing a mere 1.1 Amps at 12V, this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.
Features:
12 Volt, 13.2 Watt
Surface Mount (hardware included)
Specifications:
LED Quantity: 36 (4 rows of 9 LEDs)
Lumens: 1,154
Protection: IP65
LED Type: SMD5630 cool white (5,500K-6,300K)
Beam Angle: 180°
*The "P" within the part number indicates retail packaging
|
54.67 |
|
|
E500 Engine Room Light - 10-30V - Cool White
The E-500 is a multi-voltage (12/24V), surface-mounted engine room light that offers an impact-resistant PC lens, which allows the wires to exit straight back through the mounting surface or routed to the side through the end cap. Featuring a total of 50 LEDs, this fixture produces an impressive 1,520 lumens, comparable to a 220W standard bulb. Drawing only 1.5 amps (12V), this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.
Features:
12/24 Volt, 18 Watt
Surface Mount (hardware included)
Specifications:
LED Quantity: 50 (5 rows of 10 LEDs)
Lumens: 1,520
Protection: IP65
LED Type: SMD5630 cool white (5,500K-6,300K)
Beam Angle: 180°
*The "P" within the part number indicates retail packaging
|
83.83 |
|
|
A3 Downlight - Surface/Flush Mount - Stainless Steel
This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off).
Features:
316 stainless steel trim
6 x 0.5-watt warm white LED
242 Lumens
2.2 Watt
12 Volt
IP67
Applications:
A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel
Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture
*The "P" within the part number indicates retail packaging
|
23.09 |
|
|
Utility Light - Cool White - 10-30V
This is a surface-mount, low-profile E-330 LED compact engine room light. The white plastic end cap features a notch on the wire side to allow side access for the connection wires. A low-profile fixture extends a mere 5/8" from the mounting surface.
Features:
12/24 Volt (10-30 VDC) - 10 Watt
33 x 0.5-watt 2835 LEDs
Cool white (5700-6300K)
Polycarbonate lens with plastic housing
IP67
Meets requirements and standards for SAE J1171 USCG, ABYC & NMMA
Specifications:
Lumens: 727
Beam Angle: 120°
Surface Mount (wire can exit from the bottom or end of the fixture)
*The "P" within the part number indicates retail packaging
|
41.93 |
|
|
1600 Lumen Indoor/Outdoor Engine Room Light
Excellent for lighting up small to medium size areas. Low profile design has an IP67 Rating. Hard-anodized aluminum housing with Baked Urethane finish for extreme durability. Glass lenses will not become brittle or turn yellow like plastic lenses.
Features:
Bake urethane corrosion-resistant finish
IP67 Waterproof design
Easy installation
Technical Specifications:
Lumens - 1600
Dimensions (H x W x D) - 2.9” x 5.1” x 0.59”
Voltage - 10 - 40 V
*Sold as an Individual
|
115.50 |
|
|
Nevis - High Intensity Engine Room Light
Another high output alternative to large, boxy, unreliable fluorescents. Certified Ignition protected and small enough to mount anywhere. Wide beam angle that douses hard to light areas with a bright even light. Completely sealed, IP67 compliant and intrinsically safe.
Specifications:
Voltage: 10 - 30V DC
12V DC Amps: 900mA
24V DC Amps: 450mA
Correlated Color Temperature: 6500
Color Rendering Index: 70+
Rated Watts: 11
Lumens (White): 19
Operating Temp (°F): -31 to + 131 F
Operating Temp (°C): -35 to +55 C
Width: 5.00" (12.7cm)
Height: 2.5" (6.35cm)
Depth: 0.63" (1.60cm)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
162.62 |
|
|
Ibiza LED Engine Room Light - Non-Dimming White - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C :-31/35 to + 131/55 F
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
127.42 |
|
|
Ibiza LED Engine Room Light - Red/White Dimming - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C :-31/35 to + 131/55 F
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
157.06 |
|
|
Ibiza LED Engine Room Light - Blue/White Dimming - White Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output options, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55 F
Timed Toggled Protocol (TTP): Yes
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
157.06 |
|
|
Ibiza LED Engine Room Light - Non-Dimming White - Black Finish
As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners.
Specifications:
Lumens (White): 1000
Voltage: 10-30V DC
12V DC Amps: 1.3A
24V DC Amps: 600mA
Rated Watts: 16
CCT: 5000
CRI: 70+
Op. Temp F/C: -31/35 to + 131/55 F
Timed Toggled Protocol (TTP): No
Third Party Dimmer Compatibility (3PD): Yes
Color Match Commitment (CM): Yes
Mounting Hole Diameter: N/A
Length: 2in (5.08cm)
Width: 9in (22.86)
Depth: 1in (2.54cm)
Diameter: N/A
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
129.49 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with White Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
135.00 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
135.00 |
|
|
SR-L Series Marine Spreader Light - White Flush Mount - White Light with Red Halo
The RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle.
The halo backlighting is available in one of three colors: red, blue, or white. Forward projecting light is great for area/deck lighting
Use the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system. (Part #40300 - Sold Separately)
The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens.
Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.
Specifications:
2-Wire Input with Switch Logic to toggle between modes
High Power, Low Power and Accent Light modes
Accent light can be used for low level ambient lighting
*Sold as an Individual Light
|
112.49 |
|