E360 Engine Room Light - 12V - Cool White The E-3600 is a surface-mounted engine room light. The impact-resistant PC lens allows the wires to exit straight back through the mounting surface or be routed to the side through the end cap. Featuring a total of 36 LEDs, this fixture produces 1,154 lumens, comparable to a 160-watt standard bulb. Drawing a mere 1.1 Amps at 12V, this fixture is often used in multiple quantities to eliminate any dark spots in the engine room. Features: 12 Volt, 13.2 Watt Surface Mount (hardware included) Specifications: LED Quantity: 36 (4 rows of 9 LEDs) Lumens: 1,154 Protection: IP65 LED Type: SMD5630 cool white (5,500K-6,300K) Beam Angle: 180° *The "P" within the part number indicates retail packaging

E500 Engine Room Light - 10-30V - Cool White The E-500 is a multi-voltage (12/24V), surface-mounted engine room light that offers an impact-resistant PC lens, which allows the wires to exit straight back through the mounting surface or routed to the side through the end cap. Featuring a total of 50 LEDs, this fixture produces an impressive 1,520 lumens, comparable to a 220W standard bulb. Drawing only 1.5 amps (12V), this fixture is often used in multiple quantities to eliminate any dark spots in the engine room. Features: 12/24 Volt, 18 Watt Surface Mount (hardware included) Specifications: LED Quantity: 50 (5 rows of 10 LEDs) Lumens: 1,520 Protection: IP65 LED Type: SMD5630 cool white (5,500K-6,300K) Beam Angle: 180° *The "P" within the part number indicates retail packaging

Ibiza LED Engine Room Light - Non-Dimming White - White Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C :-31/35 to + 131/55 F  Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ibiza LED Engine Room Light - Non-Dimming White - Black Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens. Ibiza is IP67 compliant and completely sealed. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 F  Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

    Lumishore's SMX90-CS, adds a multi-color surface mount underwater light to Lumishore's extensive true color change product line. HICOB (High Intensity Chip On Board) light engine combines high power LEDs, advacnced thermal management and intelligent driver electronics into a low profile, corrosion proof, advanced polymer body. Additional individual lights can be added to the system, up to four controlled by one switch.     Some Exciting SMX90-CS Features Include: -Four Preset Colors: Blue, White, Green and Cyan, all from a single light fixture -Two strobe speeds (any color) -Light output equivalent to a 75W underwater light -Simple installation with no external driver -Wide 90 degree beam provides "Swimming Pool" effect, reducing the number of lights required per installation -Supplied with light(s) and a rocker switch  

Engine Room Light - Surface/Flush Mount This super-bright, vibration-resistant LED light meets the expectations of next-generation vessels, refits, or upgrades. This multi-voltage fixture can be powered by your DC battery system, an AC generator/shore power, or both. If connected to both, the PC board automatically switches to DC power when AC power is lost.  Features: Includes a trim ring for surface mount installation and stainless steel mounting hardware Meets Requirements and Standards for SAE J1171 USCG, ABYC & NMMA IP67 Flush or Surface Mount Daylight  white (6000K) 168 super-bright 2835 LEDs 12/24 VDC and/or 110/220 VAC Specifications: Lumens: 3400 (similar to 2 x T8 fluorescents) Beam Angle: 120° Watts: 42 *The "P" within the part number indicates retail packaging

Ibiza LED Engine Room Light - Red/White Dimming - White Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C :-31/35 to + 131/55 F  Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Ibiza LED Engine Room Light - Blue/White Dimming - White Finish As beautiful as it is brilliant, you may be surprised that Ibiza is tough enough for an engine room. But it is. And it’s just as bright, reliable, and easy to install as it’s sibling, the wildly popular Nevis. Delivering 1,000 integrating-sphere-measured lumens and dual-color output options, Ibiza is IP67 compliant, completely sealed and compatible with most PWM LED dimmers. And like Nevis, Ibiza’s carefully engineered optical system delivers a nearly perfect 180-degree beam pattern to illuminate even the farthest, darkest corners. Specifications: Lumens (White): 1000 Voltage: 10-30V DC 12V DC Amps: 1.3A 24V DC Amps: 600mA Rated Watts: 16 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 F  Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: 2in (5.08cm) Width: 9in (22.86) Depth: 1in (2.54cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Nevis - High Intensity Engine Room Light Another high output alternative to large, boxy, unreliable fluorescents. Certified Ignition protected and small enough to mount anywhere. Wide beam angle that douses hard to light areas with a bright even light. Completely sealed, IP67 compliant and intrinsically safe. Specifications: Voltage: 10 - 30V DC 12V DC Amps: 900mA 24V DC Amps: 450mA Correlated Color Temperature: 6500 Color Rendering Index: 70+ Rated Watts: 11 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 5.00" (12.7cm) Height: 2.5" (6.35cm) Depth: 0.63" (1.60cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1600 Lumen Indoor/Outdoor Engine Room Light Excellent for lighting up small to medium size areas.  Low profile design has an IP67 Rating. Hard-anodized aluminum housing with Baked Urethane finish for extreme durability.  Glass lenses will not become brittle or turn yellow like plastic lenses.  Features: Bake urethane corrosion-resistant finish IP67 Waterproof design Easy installation Technical Specifications: Lumens - 1600  Dimensions (H x W x D) - 2.9”  x 5.1”  x  0.59”  Voltage - 10 - 40 V *Sold as an Individual

NevisLT LED Engine Room Light - 1000 Lumens A high output LED alternative to large, boxy, unreliable fluorescents. With more than 1,000 integrating sphere tested lumens, the NevisLT douses hard to light areas with a 180 degree spread of bright even light. Ignition protected and perfect for many applications like mechanical spaces or compartments. Developed, designed, and manufactured in Florida, USA, the NevisLT delivers exceptional reliability and class-leading performance. As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability. Specifications: Voltage: 10-30V DC 12V DC Amps: 1.3A 2V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 12 Lumens (White): 1000 Width: 5" Height: 2.5" Depth: .63" IP67 Compliant Certified Ignition Protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1600 Lumen Engine Room/Utility Area Light - White Powerful, compact indoor/outdoor light utilizing the highest performance LED technology. Bake Urethane Corrosion Resistant Finish IP65 Waterproof Design 1600 Lumens uses only 8 Watts of Power 15 Watts 10-40VDC 2-Year Warranty Excellent for lighting up small to medium size areas. Low profile design has an IP65 Rating. Hard Anodized aluminum housing with Baked Urethane finish for extreme durability. Glass lens will not become brittle or turn yellow like plastic lenses.

Flush Mount Spreader Light - 10-30V - White This is a flush-mount spreader light with white trim. Features: 12/24 V, 12W High-Quality Composition Frame Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120-watt halogen bulbs 0.8 Amp draw at 12 volts IP68 Specifications: Dimensions (W x H x D): 6 x 2-1/2 H x 1-3/4 in. Cutout (W x H): 4-1/2 x 1-1/2 in. LED Lifetime: 50,000 Hours LED Beam Angle: 110° The temperature of the LED: Less than 158° with a 77° ambient temperature *The "P" within the part number indicates retail packaging

A-Series Black Low Power LED Light - Single - Cool White A-Series LED Accessory Light might be small, but it packs a punch. Available in two options, high or low power, the A-Series is extremely versatile. Whether it's used as a dome light in your truck, a deck light on your boat, or driving lights on your trailer, the A-Series is the perfect accent light for any application!  Contact your local dealer / distributor for more information about this and other high quality LED lighting products and accessories from RIGID Industries LED Lighting. Features: 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up Durable Polycarbonate Lens Billet Aluminum Housing Black Powder Coat Finish Designed, Engineered, & Assembled in the USA Specifications:  Watts: 4W Amp Draw: 0.3A LED's: 3 Raw Lumens: 200 Operating Temperature: -40°F to 140°F

A-Series White Low Power LED Light Pair - Cool White RIGID’s A-Series LED Accessory Light is the universal light that can be used just about anywhere. Vehicle cabs, boat cabins, work vehicle beds, under the hood of a vehicle and trunks are just a few of the places where the A-Series can provide handy bright lighting in otherwise dark environments.  The A-Series has a durable compact aluminum housing and includes rubber flat-mount, 3M™ VHB™, 2 way pad for flat mounting, and radius tube-mount adapters, which provide side or bottom wire exits to accommodate different applications. It is lightweight, waterproof, and available in a variety of different LED colors in high and low power versions.  The versatility of the A-Series makes it an easy installation on almost anything.  Features: Low Power and High Power Options Epoxy Sealed No Vent 24" Molded Wire Ingress IP68 Compliant -Dust / Water Ingress 50,000+ Hour Lifespan 10-28 V DC Patented Technology Impact Resistant Polycarbonate Lens Integrated Thermal Management System In the Box: Mounting Hardware 2 Mounting Hole Rubber Plugs 1 Adhesive Primer 1 VHB Mount Tape 1 Flat Mount Adapter 1 Tube Mount Adapter 3ft. Wire Extension 2-Wire Open Lead, No Connector ∗ Sold as a Pair