|
7" Oval Dome Light with Switch & Dimming - 12/24V
The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.
Features:
12/24V
42 x 0.5-watt 2835 LEDs
Natural White (4250K)
680 Effective Lumens
Plastic housing with a high-impact plastic lens
Surface mount, 3 stainless steel screws Included
IP67
*The "P" within the part number indicates retail packaging
|
60.46 |
|
|
5" Dome Light with Switch & 3 Stage Dimming - 10-30V - IP67
The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.
Features:
12/24V
51 x 0.5-watt LEDs
Natural White (4250K)
720 effective lumens
Plastic housing with a high-impact plastic lens
Surface mount, 3 stainless steel screws Included
IP67
*The "P" within the part number indicates retail packaging
|
71.69 |
|
|
Lumishore's SMX90-CS, adds a multi-color surface mount underwater light to Lumishore's extensive true color change product line. HICOB (High Intensity Chip On Board) light engine combines high power LEDs, advacnced thermal management and intelligent driver electronics into a low profile, corrosion proof, advanced polymer body. Additional individual lights can be added to the system, up to four controlled by one switch.
Some Exciting SMX90-CS Features Include:
-Four Preset Colors: Blue, White, Green and Cyan, all from a single light fixture
-Two strobe speeds (any color)
-Light output equivalent to a 75W underwater light
-Simple installation with no external driver
-Wide 90 degree beam provides "Swimming Pool" effect, reducing the number of lights required per installation
-Supplied with light(s) and a rocker switch
|
|
|
Slim 5" Dome Light - Warm White/Blue - 10-30V
This low-profile dome light has warm white and blue LEDs.
Features:
12/24V, 6W
390 Lumens
26 Color LED (blue)
Surface mount
IP65
Touch switch
Switch glows blue
Specifications:
Dimensions: 5 in. diameter & 1/2 in. height
*The "P" within the part number indicates retail packaging
|
28.86 |
|
|
Slim 5" Dome Light - Warm White/Red - 10-30V
This low-profile dome light has warm white and red LEDs.
Features:
12/24V, 6W
390 Lumens
26 Color LED (red)
Surface mount
IP65
Touch switch
Switch glows blue
Specifications:
Dimensions: 5 in. diameter & 1/2 in. height
*The "P" within the part number indicates retail packaging
|
28.86 |
|
|
Surface Strip Light w/Switch - White LED - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
62.28 |
|
|
Surface Strip Light w/Switch - White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
68.35 |
|
|
Surface Strip Light w/Switch - White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Surface Strip Light w/Switch - Warm White/Red LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Surface Strip Light w/Switch - Warm White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
Wall Mount with Touch Dimming & Rotating Light
Beautiful 3 watt wall fixtures put out the light! Built-in touch dimming switch also produces a soothing blue glow. The main LED produces a warming light that will really light your cabin or dim to read by. Simply touch the switch and hold until you reach desired lighting.
|
52.68 |
|
|
Wall Mount with Touch Dimming
Beautiful 3W wall fixtures put out the light! Built-in touch dimming switch also produces a soothing blue glow. The main LED produces a warming light that will really light your cabin or dim to read by. Simply touch the switch and hold until you reach desired lighting.
|
52.68 |
|
|
10" Cabin Light with Switch - White & Blue - 10-30V
This surface-mounted cabin light features a touch-switch operation. Offering two colors, warm white and blue, this light provides ample output for reading and activities or just the right amount of blue light for ambiance. Touch the touch switch once to turn on the white light; touch the switch again to switch to the blue light. Composite end caps hide mounting screws for a finished look.
Features:
Works with 12V and 24V systems.
Touch switch
Surface mount
10-30VDC - 7.6 Watt
IP67
Specifications:
LEDs: 33 White, 30 Blue
Lumens: 760 (White), 123 (Blue)
*The "P" within the part number indicates retail packaging
|
39.49 |
|
|
Apelo A3 White/Blue Underwater Light - Bronze - White Lens
Supercharged with 6000-lumen light output, the Apelo A3 is the ultimate in the Hella Marine Apelo Underwater Light range.
The A3 model has an improved formula with double the light output, maximizing the vibrant blue and intense white. This version sports the edge lighting Apelo is known for.
Optical intelligence is at the heart of Hella Marine lighting, and Apelo is no exception. Intelligent optics spread light across the water without losing light to the depths, projecting wide across the transom. With the addition of nickel-silver to the extremely corrosion-resistant housing, the Apelo A3 is perfect for permanently submerged installations on larger boats and ships.
Features:
Suitable for fiberglass, timber, steel, and composite hulls
Only mount on aluminum-hulled vessels with a suitable isolation spacer
Made in New Zealand and backed by Hella Marine’s 5-year warranty (Apelo Underwater Lights are built to last)
Specifications:
Mounting: Transom/surface
Voltage: Multivolt™ 12 / 24V DC Nominal
Max. Power Consumption: Blue/white 70W / 5.9A @ 12V, 2.9A @ 24V & Edge Light <5W / 0.37A @12V, 0.2A @ 24V
Max. Light Output: 6000 lumens (white)
Color Temperature: 5000K (white)
Beam: 90° x 24°
Protection: Spike protected to +500 volts; reverse polarity protected to -700 volts; IP68 / IP69: Suitable for submersion in operation and high-pressure water jet cleaning; High-temperature thermal cutout for out-of-water
Cable Length: 2.5m / 8.2ft, tinned marine cable
Ideal Depth: 100–500mm
Ideal Width: 600–1200mm
Lens Material: Grilamid® (premium grade, UV stable, impact resistant nylon)
Base Material: Marine grade bronze
Compliance: CE, UKCA, EN55015 / CISPR 15, IEC60533, IEC61547, ICES-005, RCM
|
508.86 |
|
|
Apelo A3 RGBW Underwater Light - Bronze - White Lens
The A3 model has an improved formula with double the light output, maximizing the vibrant blue, intense white, or full-spectrum RGBW* color. The RGBW version includes dedicated white light emitting LEDs, adding brighter and more intense white light to RGBW underwater lighting. Both versions sport the edge lighting, which Apelo is known for.
Optical intelligence is at the heart of Hella Marine lighting, and Apelo is no exception. Intelligent optics spread light across the water without losing light to the depths, projecting wide across the transom. With the addition of nickel-silver to the extremely corrosion-resistant housing, the Apelo A3 is perfect for permanently submerged installations on larger boats and ships.
*Connect Apelo RGBW lights to an RGBW lighting controller for unlimited color selection (Not supplied).
Features:
Suitable for fiberglass, timber, steel, and composite hulls
Only mount on aluminum-hulled vessels with a suitable isolation spacer
Made in New Zealand and backed by Hella Marine’s 5-year warranty (Apelo Underwater Lights are built to last)
Specifications:
Mounting: Transom/surface
Voltage: Multivolt™ 12 / 24V DC Nominal
Max. Power Consumption: RGBW 70W / 5.9A @ 12V, 2.9A @ 24V and Edge Light <5W / 0.37A @12V, 0.2A @ 24V
Max. Light Output: 6000 lumens (white)
Color Temperature: 5000K (white)
Beam: 90° x 24°
Protection: Spike protected to +500 volts; reverse polarity protected to -700 volts; IP68 / IP69: Suitable for submersion in operation and high-pressure water jet cleaning; High-temperature thermal cutout for out of water
Cable Length: 2.5m / 8.2ft, tinned marine cable
Ideal Depth: 100–500mm
Ideal Width: 600–1200mm
Lens Material: Grilamid® (premium grade, UV stable, impact resistant nylon)
Base Material: Marine grade bronze
Compliance: CE, UKCA, EN55015 / CISPR 15, IEC60533, IEC61547, ICES-005, RCM
|
554.44 |
|