MP Pumps 36067 PUMP HHLF HR 2" GAS/DIESEL MP Pumps 36067, HHLF High Head Low Flow Self Priming Centrifugal Pump End Only, 1-1/2" or 2" x 1-1/2" or 2"   High Pressure USCG Secifications Auxilary Fire Control HHLF2.0PPK B: ENG 1.0 6.7 HR

MP Pumps 21312, FLOMAX 5 Self Priming Centrifugal Pump 1-1/2" X 1-1/2" NPT Ports, Capacity up to 145 GPM, Total Head up to 100 feet.   FM5PMP C: PED 5.0   MP Pumps Flomax 5, 1-1/2" pedestal mount self priming cast iron pump # 21312. MP Pumps Flomax 5, rated at 100 GPM in cast iron construction with viton mechanical seal.   Specifications   Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft to fit 5/8"; viton mechanical seal.   Features:   Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift 5 blade impeller available for higher flows Base plate shown above is optional Double seal available for dry run applications Hydraulic motor .22 cu. in. Hydraulic motor .37 cu. in. Hydraulic motor .45 cu. in. Stainless steel impeller

MP Pumps 36088 2" PEDESTAL HHLF-CI PUMP MP Pumps HHLF High Head 140 GPM Self Priming Cast Iron 2" NPT Centrifugal Pump #36088. Up to 140 GPM, 3600 RPM, cast iron construction. The volute and impeller are removable and easily replaced. All pumps fitted with stainless steel fasteners and viton mechanical seals.   Meets USCG Secifications for Auxilary Fire Control   Specifications Rated Capacity 140 GPM Impeller Size: 6.5" Suction & Discharge Connections: 2" NPT Construction: Cast iron housing, impeller and adaptors; 304 SS drive sleeve; stainless steel fasteners; Carbon/Ceramic/Viton seal type 21.

MP Pumps 36085, HHLF High Head Low Flow Self Priming Centrifugal Pump End Only,   Self priming high head centrifugal pump, for close coupled to an electric motor supplied seperately. Auxiliary Fire Control 46 CFR, Compliant US Coast Guard.   High Pressure USCG Secifications Auxilary Fire Control   HHLF1.5PPK C: CCMTR 1.12 6.5 HR

MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part #: MP21381 Size: 3 in. NPT Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine OEM  

MP Pumps 21371 Flomax 15 NPT Self Priming Centrifugal Pump Pak Bronze, 6.0" Impeller with Base and Fasteners, 3" x 3"   FLOMAX 15 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.    A FLOMAX 15 PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 184TC and 215C frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller.    The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Wash-down Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift    This item is 'build to order'.  

MP Pumps 21383 FM 15 BRONZE PUMP MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   3" X 3" NPT Ports Capacity up to 320 GPM Total Head up to 145 feet Bronze construction 5.75 inch diameter impeller

MP Pumps 21372 Flomax 15 Self Priming Centrifugal Pump for Water & Fertilizer FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part# 21372 Configuration: Pumpak PORTS: 3 in. Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine

MP Pumps 26164 PEDESTAL C/I STD SEAL

MP Pumps FloMax FMX 100 1" x 1" Close Coupled 3/4HP Motor Single Phase 39529 The patented 1” x 1” FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A type 6A carbon / ceramic / viton mechanical seal is standard. With a maximum flow of over 55 GPM and pressure capabilities of nearly 60 feet, this rugged self-priming pump is capable of 17 feet suction lift when operating at 3450 RPM.   The FMX 100 has numerous applications in industries such as: construction, petroleum, diesel exhaust fluid, marine and marine air conditioning, agriculture for biocides and liquid fertilizers, and numerous industrial applications such as brine and calcium chloride.     Discharge 1" Suction 1" Materials of Construction 316 stainless steel Flow Up to 55 GPM Head Feet 60' Impeller 4.0" Drive Options Close Coupled 1 HP TEFC IEC80B34 Motor Close coupled 3/4HP TEFC IEC80B34 Motor Engine Mount for 3/4" Shaft Pedestal Mount 3/4" Shaft Seal Type 6A carbon/ceramic/viton

MP Pump 25470 Pedestal Cast Iron

MP Pump 26290 Pedestal Clutch Hyd Dr

MP Pump 26142 Pedestal Assy 3/4" Shaft

MP Pump 28958 Pedestal 12V Clutch

  MP Pumps 21380 Flomax 15 NPT Self Priming Centrifugal Pump Pedestal Drive Bronze, 6.0" Impeller, 3" x 3"   MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in all bronze construction.    Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.   Specifications Rated Capacity 300 GPM Maximum Discharge Pressure: 125 feet (54 PSI) Suction & Discharge Connections: 3" X 3" FNPT Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft; viton mechanical seal.    This item is 'build to order'.