|
MP Pumps FM10-AB-SK SERVICE KIT
This kit contains the following items
22358
1
Flange Gasket
22240
1
Gasket
37138
1
O'Ring Viton
29715
1
Adapter O'Ring Viton
23040
1
Flapper Valve
22361
1
Shaft Seal
23385
1
Impeller
This kit is put together at time of order.
|
1631.39 |
|
|
MP Pumps FM15-AB-SK SERVICE KIT
This kit contains the following items
22358
1
Flange Gasket
23040
1
Flapper Valve
37138
1
O'Ring Viton
29715
1
Adapter O'Ring Viton
22240
1
Gasket
22361
1
Shaft Seal
23385
1
Impeller
This kit is put together at time of order.
|
1631.42 |
|
|
MP Pumps HHLF-AB-SK SERVICE KIT
This kit contains the following items
28907
1
O'Ring Viton
22256
1
Flange Gasket
23022
1
Flapper Valve
22361
1
Shaft Seal
36082
1
Impeller
This kit is put together at time of order.
|
806.95 |
|
|
MP Pumps 22361 SHAFT SEAL
MP Pumps Replacement Parts for the Flomax 15
For Pump Model 21381
|
122.72 |
|
|
MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump
MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 15
Part #: MP21381
Size: 3 in. NPT
Flow-Rate: 320 GPM
Head Feet: 145
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
OEM
|
1762.20 |
|
|
MP Pumps 21383 FM 15 BRONZE PUMP
MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only
FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
3" X 3" NPT Ports
Capacity up to 320 GPM
Total Head up to 145 feet
Bronze construction
5.75 inch diameter impeller
|
6386.81 |
|
|
MP Pumps FloMax FMX 100 1" x 1" Close Coupled 3/4HP Motor Single Phase 39529
The patented 1” x 1” FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A type 6A carbon / ceramic / viton mechanical seal is standard. With a maximum flow of over 55 GPM and pressure capabilities of nearly 60 feet, this rugged self-priming pump is capable of 17 feet suction lift when operating at 3450 RPM.
The FMX 100 has numerous applications in industries such as: construction, petroleum, diesel exhaust fluid, marine and marine air conditioning, agriculture for biocides and liquid fertilizers, and numerous industrial applications such as brine and calcium chloride.
Discharge 1"
Suction 1"
Materials of Construction 316 stainless steel
Flow Up to 55 GPM
Head Feet 60'
Impeller 4.0"
Drive Options Close Coupled 1 HP TEFC IEC80B34 Motor
Close coupled 3/4HP TEFC IEC80B34 Motor
Engine Mount for 3/4" Shaft
Pedestal Mount 3/4" Shaft
Seal Type 6A carbon/ceramic/viton
|
1337.40 |
|
|
MP Pumps 22272 SHAFT SEAL
MP Pumps Replacement Parts for the Flomax 5 and Flomax 8
Seal Assembly
T-2100 VITON
|
69.26 |
|
|
Series 110 MP Pump 23250 Cast Iron Pump with Pedestal Mount Cast Iron
MP Pump 1-1/2" x 1-1/4" End Suction Centrifugal Pump
The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron or bronze construction to suit a wide variety of liquids.
All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life.
Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
Suction And Discharge 1-1/2" x 1-1/4" NPT
Materials Of Construction Cast Iron Pump and Pedestal
Flow Up to 130 GPM
Head Feet Up to 60'
Impeller 4" semi-open
Motor Up to 2 HP, Motor not included
Drive Options Close coupled 56C, Close coupled 145TC,
Max Solid Size .32"
APPLICATIONS: Agricultural, Commercial, Industrial, OEM
|
694.80 |
|
|
MP Pump 24832 Cast Iron Pump
MP Pumps 24832, FLOMAX 10 Self Priming Centrifugal Pump End Only, 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: CCMTR 1.13 6.0
SUCTION AND DISCHARGE3" x 3" NPT
APPLICATIONAgricultural, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION316 stainless steel, Bronze, Cast iron
FLOWUp to 320 GPM
HEAD FEETUp to 145'
IMPELLER6.0" max. diameter, semi-open
MOTORUp to 7.5 HP
|
1397.70 |
|
|
MP Pumps 21380 Flomax 15 NPT Self Priming Centrifugal Pump
Pedestal Drive Bronze, 6.0" Impeller, 3" x 3"
MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in all bronze construction.
Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 300 GPM Maximum Discharge Pressure: 125 feet (54 PSI)
Suction & Discharge Connections: 3" X 3" FNPT
Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft; viton mechanical seal.
This item is 'build to order'.
|
6366.98 |
|
|
MP Pumps FM5-AB-SK SERVICE KIT
This kit contains the following items
22255
1
Gasket
22256
1
Flange Gasket
23022
1
Flapper Valve
34555
1
O'Ring Viton
37141
1
Discharge O'Ring Viton
22272
1
Shaft Seal
22292
1
Impeller
This kit is put together at time of order.
|
348.30 |
|
|
MP Pumps FM8-AB-SK SERVICE KIT
This kit contains the following items
22255
1
Gasket
22256
1
Flange Gasket
23022
1
Flapper Valve
34555
1
O'Ring Viton
37141
1
Discharge O'Ring Viton
22272
1
Shaft Seal
22292
1
Impeller
This kit is put together at time of order.
|
348.30 |
|
|
MP Pumps 22640 SHAFT SEAL
|
69.16 |
|
|
MP Pump 28399 Flomax 8 Pump SS: Ped 5.0
MP Pumps Flomax 8, 2" 140 GPM Stainless Steel Pedestal Mount Self Priming Pump 28399
MP Pumps Flomax 8, 2" NPT self priming centrifugal pumps # 28399. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM, all stainless steel construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 140 GPM Maximum Discharge Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Construction: Stainless Steel housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss, weight 49 lbs.; 304 stainless steel stub shaft; viton mechanical seal. Motor: None
Pump Capacity - MP Pumps Flomax 8 Self Priming Pumps At 0 Suction Lift, 3600 RPM
HPImp.Capacity At Total Dynamic Head In FeetShut
Off
20'30'40'50'60'70'80'90'
Gallons Per Minute (GPM)
1-1/24.10"105856020----54'
24.62"12711090704515--74'
35.0"1501401201008060401596'
|
2854.01 |
|