Cat Pump Flange Mount Use the CAT Pumps 8021 Assembly to safely mount a 3-frame pump. This is an OEM CAT Pumps accessory.   Used with CAT Pumps 230, 240, 270 pump models Genuine CAT Pumps component

Cat Pump Electric Adptor Mount for 3 & 5Hp The CAT Pump 08022 is a motor flange for CAT 5 Frame pumps with hollow shafts, including the 8026ES, 8027ES, 8028ES, and 8029ES pumps. For connection to 3HP and 5HP power sources. Genuine CAT accessory, guaranteed to fit. Exact replacement part, don't have to worry about tweaks or adjustments OEM parts guarantee use of correct materials for increased longevity OEM parts come with manufacturer support Check with pump manual to ensure correct part number

Cat Pump 34964 Clutch 12 Volt Industrial-duty clutch mated to high-performance Cat Pump increases durability and dependability. Convenient remote control of on-off function optimizes system performance. Superior strength forged rotor, hub and armature offer superior flux and maximum torque for long life. Double groove 7 pulley, A type belt and 16.5mm shaft. Fits Cat Pumps models 280, 290, 333 and 430 piston pumps and 230, 240 and 270 plunger pumps.   Technical Specifications Accessory Type: Clutches Description: 3FR & 4FR Series - 7" Double Groove “A” Belt  

Cat Pump Motor Electric Flange Mount 8020

Cat Pumps 2SF22ES Direct Drive Plunger Pump Pump Features:   • UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life • Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities. • Ultimate portability, less than 11 pounds, less than 10" long • Regulating unloader is standard on each pump to assure system pressure control and pump protection   Specifications:   • Triplex plunger pump • Direct drive with electric flange • Maximum volume: 2.0 GPM • Maximum discharge pressure: 1200 PSI • Maximum inlet pressure: 75 PSI • Maximum pump speed: 3450 RPM • Minimum horsepower requirements: 1.6 BHP • Bore: .708" (18mm) • Stroke: .122" (3.1mm) • Crankcase capacity: 11 oz. use CAT pump hydraulic oil • Inlet port: 3/8" FPT • Discharge ports: Dual 3/8" FPT • By-pass port: 1/4" FPT • Dimensions: 9.13" x 6.65" x 6.50"  

Cat Pump 8120 Motor 2Hp 1Ph 115/208-230V The CAT Pumps 8120 is a 2 horsepower, 1 phase,60 Hz Electric Motor,  electric powered industrial duty motor. It runs a maximum speed of 1750 RPM. Compatible with 115/208-230V electrical connections. Shaft diameter measures 5/8". The motor is housed in a 56HC frame. Specifications: Horsepower: 2 Shaft Diameter: 5/8" Maximum Volts: 115/208-230V Frequency: 60 Hz Full Load Amps: 17.2/9.53–8.62 RPM: 1750 Thermal Overload: No Phase: 1 Frame Size: 56HC Service Factor: 1.4 CSA, CE and UL recognized

Cat Pump Plunger Pump 1" 3400 Rpm   This is a direct-drive triplex [three plunger rods] plunger pump, constructed of a brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. This high performance, economy pump is a flange-mount, hollow-shafted pump designed to bolt directly to a gas engine drive, providing an easy, compact installation. This pump comes standard with a Regulating Unloader and fixed Chemical Injector that mounts onto the unloader.   Technical Specifications Max Flow:3.5  Min Pressure:100  Max Pressure:4000  Inlet Port Size:0.5 Discharge Port Size:0.37 RPM:3400 Drive Type(s):Direct   Material:Brass (BB)  

Cat Pump 76056.3FR Bell Housing Cat Pumps Direct-Drive Bell Housings provide a compact direct mounting feature resulting in reduced space requirements compared to belt or gearbox assemblies. Bell Housings also eliminate the need for belt selection, sizing, and adjustment. For a complete drive package, combine with Cat Pumps Flexible Couplings designed for extended life in high temp and high RPM conditions.   Model 76056.3FR Bell Housing adapts to Cat Pumps 3 Frame plunger pumps and mounts directly to 56C - 145C motors. Refer to the data sheet for proper selection and more detailed information.   Technical Specifications Accessory Type: Bell Housings Description: 3FR Series to 56C-145TC NEMA Motor

Cat Pumps 8275 Direct-Drive Flexible Couplings Cat Pumps Direct-Drive Flexible Couplings feature special urethane flexible spyder designed for extended life with high temperature and high RPM. Selecting a compact direct drive package allows you to reduce space requirements compared to belt or gearbox assemblies as well as eliminating the need for belt selection, sizing, and adjustment. For a complete drive package, combine with Cat Pumps Bell Housing.   Model 8275 Flexible Coupling is designed for 215TC frame motors up to 92 FT.LBS./20 HP. For selection and further information, refer to the data sheet.   Technical Specifications Accessory Type: Couplings Description: 5CP & 5FR Series to 213/215TC NEMA Motor - 92 FT.LBS./20HP Max

Cat Pump 76184.3CP Bell Housing Assy 3Cp-184TC Cat Pumps Direct-Drive Bell Housings provide a compact direct mounting feature resulting in reduced space requirements compared to belt or gearbox assemblies. Bell Housings also eliminate the need for belt selection, sizing, and adjustment. For a complete drive package, combine with Cat Pumps Flexible Couplings designed for extended life in high temp and high RPM conditions.   Model 76184.3CP Bell Housing adapts to Cat Pumps 3CP plunger pumps and mounts directly to 182 - 184TC motors. Refer to the data sheet for proper selection and more detailed information.   Technical Specifications Accessory Type: Bell Housings Description: 3CP Series to 182/184TC NEMA Motor

Cat Pump 89778 Stud CAT Pumps 89778 Retainer Stud is made with 316 stainless steel and fits on 3535, 3545, and other 35FR pumps. Compatible with 35-frame pumps 316 stainless steel construction M7 x 135 Genuine CAT Pumps OEM factory part - guaranteed fit and function Use With These Pumps: 3501 3501C 3507 3507C 3511 3511C 3517 3517C 3520 3520C 3527 3531D 3531C 3535 3535C 3537 3541C 3541D 3545 3547 3570 3570S 3570C

Cat Pump 92674 Rail Kit The CAT 92674 is a pump rail mount kit for CAT 35 Frame and 38 Frame pumps. Genuine CAT Pumps part, guaranteed to fit. Use to easily mount pumps in place or replace damaged mounts during maintenance or repairs. Exact replacement part, don't have to worry about tweaks or adjustments OEM parts guarantee use of correct materials for increased longevity OEM parts come with manufacturer support Check with pump manual to ensure correct part number

Cat Pumps 231 2.3GPM   Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.    This Cat Pump 231 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.   Technical Specifications Max Flow:2.3  Min Pressure:100  Max Pressure:1500  Inlet Port Size:0.5 Discharge Port Size:0.37 RPM:1725 Drive Type(s):Belt Material:Stainless Steel (SS)   The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.  

Cat Pumps 241 2.6GPM Plunger Pump   Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.      This Cat Pump 241 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.   Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.    Technical Specifications Max Flow:3.6  Min Pressure:100  Max Pressure:1200  Inlet Port Size:0.5 Discharge Port Size:0.37 RPM:1725 Drive Type(s):Belt Material:Stainless Steel (SS)   The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.  

Cat Pump Crankcase Oil 21 oz. Bottle Cat Pumps custom blend crankcase oil is exclusively designed, tested and proven to maximize the life of your Cat Pump. This special formulated premium-grade, petroleum-based, ISO 68 hydraulic oil contains the most advanced additive package to protect against wear, oxidation, rust and corrosion. Model 6107 contains one 21 oz. bottle.