BURKS EC10M, Turbine Pump Only Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.

BURKS EC4M, TURBINE PUMP ONLY Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS EC9M, Turbine Pump Only Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS ED10M, TURBINE PUMP ONLY Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are 2-1/2 Inches NPT Inlet, 2 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS ED14M, TURBINE PUMP ONLY All BRONZE Construction. Base mounted Pump Only less Motor. Ports are 2-1/2 Inches NPT Inlet, 2 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS ES5M, TURBINE PUMP ONLY Bronze Fitted Cast Iron Construction. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT. This is a pedestal Pump End only, to be Base Mounted and long coupled to a motor.   UNSPSC Code: 40150000

BURKS ES6M, TURBINE PUMP ONLY Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS ES7M, TURBINE PUMP ONLY BRONZE FITTED Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT. This is a pedestal Pump End only, to be Base Mounted and long coupled to a motor.   UNSPSC Code: 40150000

BURKS ES8M, TURBINE PUMP ONLY BRONZE FITTED Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.  This is a pedestal Pump End only, to be Base Mounted and long coupled to a motor.   UNSPSC Code: 40150000

BURKS ES9M, TURBINE PUMP ONLY Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. This is a pedestal Pump End only, to be Base Mounted and long coupled to a motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS ET7M, TURBINE PUMP NO MOTOR Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. This is a pedestal Pump End only, to be Base Mounted and long coupled to a motor. Ports are 1 Inches NPT Inlet, 1 Inches NPT Outlet.   UNSPSC Code: 40150000

BURKS 20CS6M Close Coupled Turbine Pump BURKS exclusive unique regenerative type turbine pumps. Designed to handle clear water in addition to and many other non-abrasive, lower viscosity liquids on high pressure. As well as low capacity applications with the greatest possible efficiency.   BURKS is the only turbine pump with Life-Lok® External Impeller Adjustment. This feature allows re adjustment of impeller without disturbing piping, disassembling pump or replacing parts. This, as a result, gives up to 40% longer service life than turbine pumps of other designs.   Self-Priming Pump Compact and Space-saving size No coupling so this eliminates misalignment problems Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C). Bronze impeller with Monel blades, therefore the only moving part Bronze raceway with cast-in vortex pockets – will not vapor lock #303 Stainless Steel pump shaft Every pump is factory tested     Motor Information 4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and therefore Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.     CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.   High Temperature   For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. 

BURKS 10CS5M, Turbine Pump 32.5 gpm 115/230v Burks close coupled 32.5 gpm turbine pump having 1-1/4" NPT inlet size and 1" NPT outlet size features 350 ft Maximum Head and maximum suction lift and 1 hp power rating.   Burks exclusive unique regenerative type turbine pumps are designed to handle clear water and many other non-abrasive, lower viscosity liquids on high pressure, low capacity applications with the greatest possible efficiency. Compact space saving size No coupling - eliminates misalignment problems Dependable carbon ceramic mechanical shaft seal for temperatures to 225 deg F (107 deg C) Bronze impeller with monel blades - the only moving part Bronze raceway with cast-in vortex pockets - will not vapor lock 303 stainless steel pump shaft Easy to service Every pump factory tested

BURKS 24CT7MJAB, Turbine Pump 8gpm 1" NPT Ports 115/230VAC Burks close coupled 8 gpm turbine pump having 1" NPT inlet size and 1" NPT outlet size features 350 ft Maximum Head and maximum suction lift and 1/2 hp power rating.

BURKS 315CS6M TURBINE PUMP 230/460 Volts 1.5HP All BRONZE Construction.  Close Coupled to a 11/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/4 Inches NPT Inlet, 1 Inches NPT Outlet.     Self-Priming Pump Compact and Space-saving size No coupling so this eliminates misalignment problems Dependable carbon/ceramic mechanical shaft seal for same temperatures to 225 °F (107° C). Bronze impeller with Monel blades – therefore the only moving part Bronze raceway with cast-in vortex pockets – will not vapor lock #303 Stainless Steel pump shaft Easy to service as a result Especially relevant, Every pump factory tested   Motor Information 4CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 1750 RPM and Three Phase motors are 208-230/460 Volts, 60/50 Hz, 1750/1450 RPM.   CS Series: Single Phase motors are 115/208-230 Volt, 60 Hz, 3450 RPM Three Phase 1, 11/2 & 2HP. – 208-230/460 Volt, 60/50 Hz., 3450/2900 RPM Three Phase 3 & 5 HP – 208-230/460 Volt, 60 Hz, 3450 RPM Standard pump motors have open drip proof construction and are rated with jet pump service factors for continuous duty operation at all ratings shown. Single phase motors are capacitor start/induction run with built-in overload protection. Three phase motors require a magnetic type starter which provides full 3-leg overload protection. Failure to use the correct starter and overloads will void the warranty.   High Temperature For Temperatures to 500 °F (260 °C). Series CS Pumps are available while in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications.    For High Temp Models please use the Contact Us page, also use the Contact Us page for a Shipping Quote.