Ampco GX5039902 Casing Gasket KC2 1 1/2 X 1 Ampco Pump Repair Part GX5039902 Gasket Casing/Cover. Designed for 1-1/4 X 1 (Nickle Aluminum Bronze/Stainless Steel), 1-1/2 X 1 (Nickle Aluminum Bronze/Stainless Steel) pump models.  

CAL PUMPS   A/C Circulation Pump - Air Conditioning & Cooling - Air Conditioning - Seawater Circulation Pump - Magnetic Drive Small Pond Pump CAL customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why.  Four different models are offered at CLR Marine with flow rates from 320 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 110°F! 6' power cords are standard. Features & Benefits of the CAL PUMPS:   One year warranty UL Listed for consumer confidence Premium stainless steel and bronze construction for longevity Six or twenty foot power cord for convenience Suitable for fresh or salt water applications Can be used in hot water applications up to 110°F Extremely quiet operation Use submerged or in open air Corrosion resistant 115 or 220 volt motors Thermally protected Optional Mounting Bracket Available (model MSUB OR MSUBM) Do Not Run Dry Operate horizontal or volute down MS320 have ½” MNPT intake and ¼” MNPT discharge MS580, 900, 1200 have ¾” MNPT intake and ½” MNPT discharge   Cal 1200 GALLON PER HOUR PUMP W/ 6' CORD Model: MS1200 Cal 900 GALLON PER HOUR PUMP W/ 6' CORD Model: MS900 Cal 580 GALLON PER HOUR PUMP W/ 6' CORD Model: MS580 Cal 320 GALLON PER HOUR PUMP W/ 6' CORD Model: MS320  See all Cal Pump Products   S T A I N L E S S  S T E E L   &   B R O N Z E   P U M P S Model AMPS (MIN/MAX) WATTS (MIN/MAX) MAX FLOW MAX HT. 1' 3' 5' 7' 9' 11' 13' 15' 17' MS320 1.05-1.30 68-89 375 12.7' 360 335 305 262 215 - - - - MS580 2.15-2.55 138-203 860 14' 830 750 675 580 475 345 125 - - MS900 2.17-2.76 156-234 885 16' 855 790 725 650 560 460 350 175 - MS1200 2.97-3.79 208-312 1100 18' 1070 1000 925 850 760 675 560 425 225   Cal Pumps at CLR Marine

Ampco Pumps AC218MD21T-S Peo 2 X 1 1/2 Kit

Ampco Fluid End Aluminum Bronze Full Size

Ampco ICPLUS214-180TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.

Ampco ICPLUS216-250TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.  

Ampco ICPLUS218-280TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.  

Ampco Pumps AC114MD56C-3.75 Peo 1 1/2 X 1 1/2 Kit 3.75

Scot Pump 3028K131 Wet End Only 16 SF 2 X 1.5 NPT BU/CBN/CER

Ampco Kc2 1 1/2 X 1 1/4 Niaibz Fluid End  

Ampco Pumps CB+114M14T-S-3.75 Peo 1 1/2 X 1 1/2 Kit

Ampco Pumps CB+114MB56C-S Peo 1 1/2 X 1 1/2 Kit

Little Giant Mag-Drive Pump 580002 with 6'Cord Little Giant 2-MD Magnetic Drive Pump Motor 115 Volt 50/60 Hz 1/30 HP Open Fan Cooled Motor, 510 GPH at 1 Foot Head, Shutoff Head 14.6 Feet, Inlet: 1/2" FNPT, Outlet: 1/2" MNPT, Polypropylene Body, Fluid Temperature Up to 150F (66C), UR/C-CSA Listed, 6 Foot Power Cord   580002 Magnetically driven pump for mildly corrosive chemicals and solutions. The MD Series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersed use.

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us

Ampco Pumps AC114MD14T-S/VITON Peo Full Size Impeller