|
Oberdorfer 750B Series Self Priming Base Mount Pump
FEATURES
Pump Body:
Bronze
Ports:
1 1/2" NPT
Flow:
93 GPM Max
Pressure:
37 PSI Max, 82 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Seal Buna Standard, Viton or Teflon Optional
Shaft:
Uses Motor Shaft. Available with K-Monel Shaft for Marine Applications.
Motor / Drive:
Pump Heads can be Field Mounted to Standard Nema C Jet Pump Motor with Threaded Shaft. We have many motor options available and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE BASE MOUNTED SELF-PRIMING CENTRIFUGAL PUMP
Self-Priming to 20 Ft. Suction Lift. Seal Options Available for Solvents and Mild Chemicals. Base May be Mounted to Motors with Weld-On Feet.
750B-T19 is Oberdorfer - Self Priming Base Mount Pump Bronze 1 1/2"NPT 1 1/2HP 115/230V ODP
|
2861.78 |
|
|
Oberdorfer 81Pb Pump Ped Mt Brz 11/2 X 11/4
|
2214.00 |
|
|
Hypro 4101Xl-A, Roller Pump 7Gpm 150Psi
Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids.
The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Ready for use with Roundup®.
Features:
Max flow: 7 gpm
Max pressure: 150 psi
Max speed: 2600 rpm
Port sizes: 3/4" NPT
Pump shaft rotation: CW
5/8" solid stainless steel shaft ( 1/2" Hollow Shaft also available)
|
592.44 |
|
|
Oberdorfer 405M-04 Pump Peo G/P Sewage
FEATURES
Pump Body:
Bronze
Ports:
1" NPT and 1 1/2" Hose
Flow:
24 GPM at 20 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
Motor / Drive:
Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.
APPLICATIONS / CHARACTERISTICS
RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED
Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.
Oberdorfer Flexible Impeller Utility Pump Head Only, 1"NPT Ports, Neoprene Impeller
|
783.00 |
|
|
Oberdorfer N992M-J07 Gear Pump 3/8" 1/2 Hp
|
1258.20 |
|
|
Oberdorfer 900B-T63 Pump Self Prime 2" 1 1/2Hp
|
1684.06 |
|
|
Oberdorfer 900B-T25 Pump Self Prime 2" 1 1/2Hp
|
1853.84 |
|
|
Oberdorfer N992Q-J09 Gear Pump 1/2 Hp Xp
|
2165.40 |
|
|
Oberdorfer 405M-04-M75 Pump 3/4Hp 1800Rpm 12V
FEATURES
Pump Body:
Bronze
Ports:
1" NPT and 1 1/2" Hose
Flow:
24 GPM at 20 feet of head
Impeller:
Neoprene Standard, Buna Optional
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
Motor / Drive:
Close coupled Rubber Impeller Pumps are mounted directly onto the motor without the use of a shaft coupling. This pump is designed to be coupled to a Nema C 56C faced motor. It uses an aluminum adapter plate to accommodate the pump. The gas engine mount has its own adapter. We can supply additional motors and assemble for you.
APPLICATIONS / CHARACTERISTICS
RUBBER IMPELLER PUMP BRONZE CLOSE COUPLED
Close coupled Rubber Impeller Pumps are made of high quality bronze for maximum corrosion resistance. The rubber impeller is mounted on a separate stainless steel shaft which is counterbored on the outer end in order to slide over the carbon steel motor shaft. Ball or sleeve bearings in the motor or engine support the shaft. Model 405M has a mechanical seal. Impellers are made of Neoprene rubber, Buna N impellers are available on request. Suction lifts of 15 ft. are possible when pump is fully primed. Portable. Compact. Easy Impeller Replacement. Vacuum Switch Shut-off Optional.
Oberdorfer Flexible Impeller Utility Pump, 1"NPT Ports, Neoprene Impeller, 3/4HP 12V TEFC Motor
|
2403.96 |
|
|
JABSCO 15550-9775 PUREFLO PEDESTAL 2" CLAMP
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
1 1/2" or 2" Clamp Type
Flow:
10, 25, 50 or 100 GPM Max
Pressure:
From 4.3psi (10 feet of head) to 60.5psi (140 feet of head)
Impeller:
Neoprene or Hi Pressure Neoprene
Shaft Seal:
Mechanical; Carbon-on-Ceramic Nitrile
Shaft:
316 Stainless Steel for belt drive or direct coupling
APPLICATIONS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 10 feet.
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco SS Pureflo Pedestal Pump, 2" Clamp Ports, Up to 50GPM, High Pressure Neoprene Impeller
|
4425.57 |
|
|
Oberdorfer 402M-03 Pump 11/4 Barb 1 Grv Pulley
Fits John Deere and Daytona Marine for Chevy 327 and 427 CI blocks
|
1639.80 |
|
|
Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump
Pump Body:
Bronze
Ports:
Inlet: 3/4" NPT Female
Outlet: 1/2" NPT Female and 3/4" NPT Male
Flow:
Up To 24 GPM Maximum
Pressure:
Up To 23 PSI, 53 feet of head
Impeller:
Bronze Centrifugal
Shaft Seal:
Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available.
Shaft:
416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use
Motor:
1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor
APPLICATIONS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.
Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.
|
1088.10 |
|
|
Oberdorfer 6998 Motor 1/2 Hp 3450 Rpm 3Ph
|
834.24 |
|
|
Oberdorfer 7167 Motor 1-1/2 Hp 3450 Rpm
|
1470.72 |
|
|
March TE-7S-MD 1.5hp 3 phase
March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch female pipe thread, and the outlet is 1 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 110/220V 1 horsepower totally enclosed fan cooled motor. The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 190/380V 1 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7S-MD is suitable for your application, please contact March Pump.
Perfect for Applications Including;
Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
Great for Chemicals Including
The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride, Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.
Unit 60HZ 50HZ System US Metric US Metric Max Flow
53 GPM
200 LPM
47.5 GPM
180 LPM
Max Head
57.5 FT
17.5 M
39.4 FT
12 M
Power
1 HP
.745 KW
1 HP
.745 KW
Electrical
1PH 115/208/230V 60HZ, 110/220V 50HZ or 3PH 208/230/460V 60HZ, 190/380V 50HZ
On 50HZ, the Single Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.
On 50HZ, the Three Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options
Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof
P/N
0155-0173-0300 (1 Phase 1HP) with Metal Motor Bracket
P/N
0155-0174-0300 (3 Phase 1HP) with Metal Motor Bracket
P/N
0155-0036-0300 (3 Phase 1.5HP) with Metal Motor Bracket
P/N
0155-0285-0100 (1 Phase 1HP) with Plastic Motor Bracket
P/N
0155-0286-0100 (3 Phase 1HP) with Plastic Motor Bracket
P/N
0155-0287-0100 (3 Phase 1.5HP) with Plastic Motor Bracket
|
2829.86 |
|