|
Jabsco 50860-0012 Series SS Cyclone Circulation Pump
Pump Body:
Stainless Steel
Port Size:
3/4" pipe threads. Available with NPT or BPS threads.
Flow:
80 Litres/min (21.1 USgallons/min)
Pressure:
up to 1.3 bar (19psi)
Impeller:
Stainless Steel Anti-clog impeller design.
Shaft Seal:
Mechanical
Motor:
Max. 30 minutes duty (Min. 30 minutes off).
ISO 8846 MARINE and USCG Regulations for Ignition Protection • ISO 8849 MARINE Bilge Pump Standard.
APPLICATIONS
Silent running. Single tool servicing. 2m (6 foot) suction lift when wet.
A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations
Jabsco Cyclone SS Centrifugal Pump Hi-Pressure 12Volt 3/4"NPT 21GPM 19psi
|
495.54 |
|
|
Jabsco Reversible Pump W/Switch
Jabsco Reversible Pump, 12V, Nitrile Impeller, 3/4" Garden Hose Threaded Ports, Up To 1.8GPM at 5 Feet of Head, Maximum Head 40 Feet, with Switch and Fuse 1.8GPM, 3/4" Garden Hose Ports, 12V DC
|
371.10 |
|
|
Jabsco 50860-0024 Cyclone Hi-Pressure 24V
Jabsco High Pressure Centrifugal Cyclone Pumps are designed for circulation applications such as hot water systems, livewell or bait tank installations.
Features:
Heavy-duty robust stainless steel construction
Only one tool required for routine servicing (3/8" spanner)
Virtually silent running centrifugal pump
Long-life DC motor
Head rotatable in 90° segments
Anti-clogging impeller design
Long-life mechanical seal
Recommended intermittent duty: Max. 30 minutes On / min. 30 minutes Off
Pump can be mounted on any flat surface
Pump can be run dry for short periods of time
ISO 8846 MARINE and USCG requirements for ignition protection.
ISO 8849 MARINE Bilge Pump Standard.
Specifications:
Jabsco Model No. 50860-0024
Flow Rate: 21 GPM
Pressure:up to 1.3 bar (19psi)
Impeller:Stainless Steel Anti-clog impeller design.
Shaft Seal: Mechanical
Port Size: 3/4"
Nominal Voltage: 24 Volt DC
Max. Current Draw: 10.5 Amps
Recommended Fuse: 15 Amp
Jabsco- Cyclone SS Centrifugal Pump Hi-Pressure 24Volt 3/4"NPT 21GPM 19psi
|
506.34 |
|
|
JABSCO 50836-0012 MOTOR KIT (CYCLONE LP 12V)
|
187.67 |
|
|
JABSCO 50850-0012 CYCLONE HYBRID NPT 12V
|
535.29 |
|
|
Jabsco 18330-0000 Electric Clutch Pump 12V with 2" Ports
This Manually Activated Clutch Pump Offers all the Benefits of Flexible Impeller Pumps with a High Capacity Flow Rate and Horizontally Oriented Ports.
Pump Body: Bronze
Port Size: 2" NPT
Flow: 83 GPM at 10 feet of Head, 1750 RPM
Impeller: Nitrile
Shaft Seal: Mechanical, Carbon-Ceramic
Shaft: Brass
Pulley: 7" Diameter
Used for
MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.
INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine, brine.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
18330-0000 is Jabsco Electric Clutch Pump 12V, 2" NPT Ports, Double "A" Groove Pulley
|
1590.14 |
|
|
Jabsco 11870-0045 Electric Pump 1 1/4 12V Clutch
FEATURES
Pump Body: Bronze
Port Size: 11870-Series, 1-1/4" NPT Internal
Electric: 12V
Self-priming from 7.8 feet dry
Pulley: Single B groove or Double A groove
Impeller: Nitrile
Shaft Seal: Mechanical Carbon-Ceramic, Face Type
Shaft: Stainless Steel
Bearings: Shielded Ball Bearings
APPLICATIONS
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation.
MARINE: Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock-side pump
INDUSTRIAL: Circulating and transferring, Velocitymixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING: Pumping water stock, Pumping water from shallow wells and cisterns.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for draining meter boxes, manholes, excavations; For pollution control and watering for dust control.
Jabsco Electric Clutch Pump 12V, 1-1/4" NPT Ports, Single "B" Groove Pulley
|
1214.51 |
|
|
Jabsco Pump 5320-0011 which replaces Westerbeke 11830
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and has vertically oriented ports 5.8 gpm (22 lpm) at 10 ft. (3m) total head at 1750 rpm Self-priming to 10 ft. (3m) vertical lift
Fitting: 3/8 in. NTP
Size: 5 15/16 long x 3 1/2 wide x 3 5/18 in. high
Weight: 1 1/2 lbs. (0.7 kg)
Pump with neoprene impeller, full cam, and lip seal
Replaces Westerbeke 11830
FEATURES
Pump Body: Bronze pedestal
Port Size: 3/8" NPT vertical
Flow: 7.3 GPM at 10 feet of head, 2100 RPM
Pressure: Max 17.3 PSI at 40 feet of head, 2100 RPM
Impeller: Neoprene
Shaft Seal: Lip Type
Shaft: Steel
MARINE Pumping bilges, washdowns. Circulating water in bait tanks. Utility dockside pump. Circulating engine raw water.
INDUSTRIAL Circulating and transferring liquids. Velocity-mixing. Pumping coolants on machine tools. Returning spilled liquids to process. Pumping waste water to sewer. Cellar, yards and sump drainage. Chemical manufacturers and pharmaceutical houses- to pump soap, liquors, ink, dyes, medicines, alcohol, various acids, tanning liquors, glycerine, lotions, brine, etc.
|
780.47 |
|
|
Jabsco 17830-0012 12V Oil Pump
Pump Body: Bronze
Port Size: 3/8" NPT
Impeller: Nitrile
Shaft Seal: Buna Lip Type
Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).
APPLICATIONS
The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.
|
389.66 |
|
|
Jabsco 30810-0012 Pump 12V 3Gpm No Switch
|
107.61 |
|
|
Jabsco 30812-0012 Pump 12V 3Gpm 60Psi
|
135.46 |
|
|
Jabsco 12210-0003 Pump 115V Motor
Pump Body: Bronze
Port Size: 3/8" NPT Internal Pipe Thread and Adaptors for 3/4" garden hose thread
Flow: 3.4 GPM at 10ft
Pressure: 17.4 PSI Max
Impeller: Neoprene or Nitrile
Shaft Seal: Lip Type
Motor: 115 Volt AC Intermittent duty with Replaceable Brushes, Stainless Steel Shaft, 6' cord, three prong grounding plug
APPLICATIONS
The 12210-Series Pumps are the most compact self-priming flexible impeller 115 Volt AC Utility Pumps Jabsco offers.
INDUSTRIAL: Transferring liquids. Velocity-mixing. Pumping coolants. Pumping waste water to sewer. Cellar, yard and sump drainage. Cooling Heliarc welding equipment.
MARINE: Washing down decks and docks. Water for ship's service supply. Pumping out crank-case oil.
FARMING: Pumping water for stock, poultry houses, farmhouse. Pumping water from wells and cisterns. Pumping liquid ballast into tractor tires. Pumping water from flooded basements.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, etc. Draining water heaters and water closets. Draining laundry tubs below sewer level. Removing water trapped between walls, draining inaccessible places when pipes break or leak. Draining fishing ponds and garden pools. Removing sludge, lye water and other caustics from stopped up drains and sinks.
Jabsco Flexible Impeller Utility Pump 115V 3.4GPM Nitrile Impeller
|
510.49 |
|
|
Jabsco 18330 Series Electric Clutch Pump
FEATURES
Pump Body:
Bronze
Port Size:
2" NPT
Flow:
83 GPM at 10 feet of Head, 1750 RPM
Impeller:
Nitrile
Shaft Seal:
Mechanical, Carbon-Ceramic
Shaft:
Brass
Pulley:
7" Diameter
APPLICATIONS
SELF PRIMING PEDESTAL MOUNT ELECTRIC CLUTCH PUMP
MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.
INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals,pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine. brine. etc.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations and emergency pumping.
18330-0001 is Jabsco Electric Clutch Pump 24V, 2" NPT Ports, Double "A" Groove Pulley
|
1590.14 |
|
|
Jabsco Water Puppy Ac Hd Pump
FEATURES
Pump Body:
Bronze
Port Size:
1/2" NPT Female. Includes Two 3/4" Male Garden Hose Adapters.
Flow:
6.0 GPM at 10 feet of head
Pressure:
to 17.3 PSI
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
1/6hp - 115 Vac, 60 Hz. ODP Motor
1/4hp - 115 Vac, 60 Hz. TENV Motor
Thermal Overload Protector Stainless Steel Shaft 8' Cord with 3 Prong Grounded Plug
APPLICATIONS / CHARACTERISTICS
INDUSTRIAL: Circulating and transferring, velocitymixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns
MARINE: Washdowns, utility dock side pump
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling
Jabsco Flexible Impeller Utility Pump 115V ODP Motor 6GPM Nitrile Impeller
|
813.66 |
|
|
Jabsco Water Puppy Ac-Tefc
FEATURES
Pump Body:
Bronze
Port Size:
1/2" NPT Female. Includes Two 3/4" Male Garden Hose Adapters.
Flow:
6.0 GPM at 10 feet of head
Pressure:
to 17.3 PSI
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Shaft:
Stainless Steel
Motor:
1/6hp - 115 Vac, 60 Hz. ODP Motor
1/4hp - 115 Vac, 60 Hz. TENV Motor
Thermal Overload Protector Stainless Steel Shaft 8' Cord with 3 Prong Grounded Plug
APPLICATIONS / CHARACTERISTICS
INDUSTRIAL: Circulating and transferring, velocitymixing, pumping machine tool coolants, return spill, sump drainage, pharmaceuticals, soap, liquors, ink, dyes, alcohol, glycerine, brine and pumping water for cooling heliarc welding equipment
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns
MARINE: Washdowns, utility dock side pump
PLUMBING & HOME EMERGENCY USE: Pumping out flooded basements, cesspools, sumps, water heaters and water closets, drains and sinks, draining fishponds and small pools
PUBLIC UTILITIES AND MUNICIPALITIES: Dewatering and draining meter boxes and excavations, dust control and sampling
Jabsco Flexible Impeller Utility Pump 115V TENV Motor 6GPM Nitrile Impeller
|
813.66 |
|