|
Flojet G57-3205A Pump Aod Viton 1/4 Brass
Connections: - Fluid, 9.5mm (3/8") hose - Air, 6mm (1/4") hose
Dimensions: - 116mm long, 82mm wide, 115mm high
Output: - up to 26.5 litres/minute (5.9 gallons/minute). Maximum pressure 6.9bar (100psi)
Capable of passing solids up to 3.2mm diameter
Corrosion Resistant Sanitary Design
Self-priming up to 4.5m
Pump can run-dry and handle liquids up to 49ºC (120ºF)
Max. Air Supply Pressure 6.9bar (100psi)
|
315.84 |
|
|
Flojet 03811-143A Mpu 12V S/E 3C Sw150Bp
Flojet 03811133A Self-Priming High Pressure Triplex Pump - 150 PSI, 1.4 GPM, 12 VDC
Electric Pump
Flojet's 03811133A pump features a unique three-chamber design that delivers an flow rate of 1.4 GPM. Handles pressures up to a maximum of 150 PSI. Well-suited for spraying, misting, filtration, cooling, dispensing, and pressure boosting. NPTF Threaded inlet and outlet ports with a diameter that measures 3/8 inches.
Specifications:
Open Flow: GPM 1.4
Switch Pressure: PSI 150
Check Valve: Viton¨
Diaphragm: Santoprene¨
Voltage: 12 VDC
Duty Cycle: Intermittent
Port Size: 3/8" NPTF
Motor Design Perm. Magnet TENV (non-ventilated)
Pump Head Material: Glass Filled Nylon
Certifications: CE, NSF components
Features:
Flow rates up to 1.4 GPM
(5.3 LPM) and operating pressure of up to 150 psi (10.3 bar)
Constructed from a selection of materials suitable for handling a broad range of chemicals
Innovative bypass design
Self-priming up to 8ft (2.4m)
Sealed motor
Can run dry for extended periods of time without damage
Coinjected molded diaphragm technology
Consistent pressure over time
|
260.44 |
|
|
Flojet 03811-133A Mpu 12V S/V 3C Sw150 Bp
Flojet 03811133A Self-Priming High Pressure Triplex Pump - 150 PSI, 1.4 GPM, 12 VDC
Electric Pump
Flojet's 03811133A pump features a unique three-chamber design that delivers an flow rate of 1.4 GPM. Handles pressures up to a maximum of 150 PSI. Well-suited for spraying, misting, filtration, cooling, dispensing, and pressure boosting. NPTF Threaded inlet and outlet ports with a diameter that measures 3/8 inches.
Specifications:
Open Flow: GPM 1.4
Switch Pressure: PSI 150
Check Valve: Viton¨
Diaphragm: Santoprene¨
Voltage: 12 VDC
Duty Cycle: Intermittent
Port Size: 3/8" NPTF
Motor Design Perm. Magnet TENV (non-ventilated)
Pump Head Material: Glass Filled Nylon
Certifications: CE, NSF components
Features:
Flow rates up to 1.4 GPM
(5.3 LPM) and operating pressure of up to 150 psi (10.3 bar)
Constructed from a selection of materials suitable for handling a broad range of chemicals
Innovative bypass design
Self-priming up to 8ft (2.4m)
Sealed motor
Can run dry for extended periods of time without damage
Coinjected molded diaphragm technology
Consistent pressure over time
|
273.85 |
|
|
Flojet 03811-033A 115V S/V 3C Sw150
Flojet 03811033A Self-Priming High Pressure Triplex Pump - 150 PSI, 1.4 GPM, 115 VAC
Electric Pump
The Flojet 03811033A features a unique three chamber design that delivers excellent flow rates and pressures. Handles pressures up to a maximum of 150 PSI. Well-suited for spraying, misting, filtration, cooling, dispensing and pressure boosting. NPTF Threaded inlet and outlet ports with a diameter that measures 3/8 inches.
Specifications:
Open Flow: GPM 1.4
Switch Pressure: PSI 150
Check Valve: Viton¨
Diaphragm: Santoprene¨
Voltage: 115V AC
Duty Cycle: Intermittent
Port Size: 3/8" NPTF
Motor Design Perm. Magnet TENV (Non-Ventilated)
Amp Draw: 1.2 Amps Max for 115V AC
Pump Head Material: Glass Filled Nylon
Certifications: CE, NSF components
Features:
Flow rates up to 1.4 GPM (5.3 LPM) and operating pressure of up to 150 psi (10.3 bar)
Constructed from a selection of materials suitable for handling a broad range of chemicals
Innovative bypass design
Self-priming up to 8ft (2.4m)
Sealed motor
Can run dry for extended periods of time without damage
Coinjected molded diaphragm technology
Consistent pressure over time
|
308.50 |
|
|
Flojet 20381-057 Ports 1/4"Od Straight Push
Flojet Snap-In Quad Port Kit with Viton O-Ring 1/4"OD Tube Straight JG John Guest Push-in (pair)
|
20.01 |
|
|
Flojet 03811-043A Mpu 115V S/E 3C Sw150 Bp
Flojet 03811043A Self-Priming High Pressure Triplex Pump - 150 PSI, 1.4 GPM, 115 VAC
Electric Pump
The Flojet 03811043A pump features a unique three chamber design that delivers excellent flow rates and pressures. Handles pressures up to a maximum of 150 PSI. Well-suited for spraying, misting, filtration, cooling, dispensing and pressure boosting. NPTF Threaded inlet and outlet ports with a diameter that measures 3/8 inches.
Specifications:
Open Flow: GPM 1.4
Switch Pressure: PSI 150
Voltage: 115 VAC
Duty Cycle: Intermittent
Port Size: 3/8" NPTF
Motor Design Perm. Magnet TENV (non-ventilated)
Pump Head Material: Glass Filled Nylon
Diaphragm: Santoprene¨
Check Valve: EPDM¨
Certifications: CE, NSF components
Features:
Flow rates up to 1.4 GPM (5.3 LPM) and operating pressure of up to 150 Psi (10.3 bar)
Constructed from a selection of materials suitable for handling a broad range of chemicals
Innovative bypass design
Self-priming up to 8ft (2.4m)
Sealed motor
Can run dry for extended periods of time without damage
Coinjected molded diaphragm technology
Consistent pressure over time
|
302.93 |
|
|
Little Giant Submersible Pump 501003
Item: 501003
Model: 1
Little Giant's small submersible oil-filled pump features a epoxy coated cast aluminum housing. Designed for commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated. This compact 205 GPH pump features a 1/4" MNPT discharge, 7.4' shut-off head capability, and screened inlet.
501003 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions, and fertilizers.
HP: 1/150 hp
Frequency: 60 Hz
Amps - Full Load: 1.1 A
Full Load Watts: 70 W
Volts: 115 VAC
Cord Length: 6 ft / 1.83 m
Max Flow Rate - 60 Hz: 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h
Flow Rate At 1ft: 3.42 gpm / 205 gph / 776 Lph / 12.93 Lpm / 0.78 m³/h
Shut-Off: 7.4 ft / 2.26 m
Shut Off Height - 60Hz: 7.4 ft / 2.26 m
Max PSIG - 60Hz: 3.2 PSI
Max Fluid Temperature: 120°F
|
167.70 |
|
|
Roper Pump N41-460-1 4.60 To 1 Gearbox
|
1339.20 |
|
|
Flojet G57-320GA Pump Aod Viton 3/8 Port
The Flojet G57320GA is a Flojet G57 Series Air Operated Diaphragm Pump, with Polypropylene housing, Viton Diaphragm, Viton Check Valve Seat, Viton O-Rings, Hastelloy Springs, and is driven by an internal air motor. This small air operated double diaphragm pump is designed to be the ultimate in performance and reliability. The robust design combines innovative features and relentless testing to offer a pump that has a long, trouble free service life.
This Air Operated duplex Diaphragm pump has leak resistant radial seals, eliminating the need for critical o-ring seals. It is is capable of passing 1/8 inch (3.2 mm) diameter solids easily with large clog free check valves. It has a unique shuttle valve that combines a long life ceramic slide valve with a unique spring design that eliminates stalling. The air or CO2 inlet can handle pressures up to 100 PSI (6.9 bar) and has a quiet operation with a large exhaust muffler with a maximum noise level of 87dB.
The Flojet G57320GA Duplex Diaphragm Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are Chemical Transfer and Dispensing, Solvent Applications, Parts Washers, Ink Transfer, and Car Wash Systems. When starting this pump, regulate the gas pressure to desired setting. For most installations 20 PSI 1.4 bar inlet will be adequate, although DO NOT go below 20 PSI. Pump will operate according to air supply.
|
315.84 |
|
|
Flojet G57-3225 Apu Viton 3/4 Hb & 1/4 Hb
Flojet Diaphragm Pump AOD Air Powered, 3/4" Hose Barb Snap-In Ports, 7.0GPM Max, Polypropylene, Viton Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Brass Air Inlet
Model No.: G57 Series
Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
Highest flow rate for any air pump of comparable size
Robust Design with durable integral mounting
Patented Shuttle Valve, eliminates stalling
Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
Corrosion Resistant materials capable of handling a wide range of chemicals
Sanitary design with insert molded diaphragm (Santroprene only)
Leak Resistant radial seals, no critical o-ring seals
Quiet Operation with large exhaust muffler
Ease of Installation with all quick disconnect ports
Stall-proof design with patented shuttle valve
Automotive Cleaning and Recycling; Chemical Transfer and dispensing; Bag-In-Box chemicalsParts Washers; Car Wash Systems
Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.
|
315.84 |
|
|
Flojet G57-3218 Pump Aod Viton 1/2" Ports
Flojet Diaphragm Pump AOD Air Powered, 1/2" Hose Barb Snap-In Ports, 5.5GPM Max, Polypropylene, Viton Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Plastic Air Inlet
Model No.: G57 Series
Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
Highest flow rate for any air pump of comparable size
Robust Design with durable integral mounting
Patented Shuttle Valve, eliminates stalling
Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
Corrosion Resistant materials capable of handling a wide range of chemicals
Sanitary design with insert molded diaphragm (Santroprene only)
Leak Resistant radial seals, no critical o-ring seals
Quiet Operation with large exhaust muffler
Ease of Installation with all quick disconnect ports
Stall-proof design with patented shuttle valve
Automotive Cleaning and Recycling; Chemical Transfer and dispensing; Bag-In-Box chemicals Parts Washers; Car Wash Systems
Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.
|
315.84 |
|
|
Flojet G57-5005A Pump Aod Santo w/o Ports
Flojet Diaphragm Pump AOD Air Powered, no Snap-In Port Fittings, 7.0GPM Max with 3/4” Port Fittings, Polypropylene, Santoprene Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Brass Air Inlet
Model No.: G57 Series
Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
Highest flow rate for any air pump of comparable size
Robust Design with durable integral mounting
Patented Shuttle Valve, eliminates stalling
Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
Corrosion Resistant materials capable of handling a wide range of chemicals
Sanitary design with insert molded diaphragm (Santroprene only)
Leak Resistant radial seals, no critical o-ring seals
Quiet Operation with large exhaust muffler
Ease of Installation with all quick disconnect ports
Stall-proof design with patented shuttle valve
Automotive Cleaning and Recycling; Chemical Transfer and dispensing; Bag-In-Box chemicalsParts Washers; Car Wash Systems
Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.
|
205.97 |
|
|
Flojet G57-3208 Pump Aod Viton 3/8" Ports
Flojet Diaphragm Pump AOD Air Powered, 3/8" Hose Barb Snap-In Ports, 4.5GPM Max, Polypropylene, Viton Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Plastic Air Inlet
Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
Highest flow rate for any air pump of comparable size
Robust Design with durable integral mounting
Patented Shuttle Valve, eliminates stalling
Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
Corrosion Resistant materials capable of handling a wide range of chemicals
Sanitary design with insert molded diaphragm (Santroprene only)
Leak Resistant radial seals, no critical o-ring seals
Quiet Operation with large exhaust muffler
Ease of Installation with all quick disconnect ports
Stall-proof design with patented shuttle valve
Automotive Cleaning and Recycling;Chemical Transfer and dispensing;Bag-In-Box chemicals Parts Washers ;Car Wash Systems
Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.
|
315.84 |
|
|
Flojet G57-5205 Pump Air 4.5/100 Santo 3/8
The Flojet G57-5205 Diaphragm Air Pump AOD is Air Powered and uses a 3/8” Hose Barb Snap-In Ports. The G57-5205 discharges 4.5GPM Max, Polypropylene, Santoprene Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Brass Air Inlet
Model No.: G57 Series
Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
Highest flow rate for any air pump of comparable size
Robust Design with durable integral mounting
Patented Shuttle Valve, eliminates stalling
Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
Corrosion Resistant materials capable of handling a wide range of chemicals
Sanitary design with insert molded diaphragm (Santroprene only)
Leak Resistant radial seals, no critical o-ring seals
Quiet Operation with large exhaust muffler
Ease of Installation with all quick disconnect ports
Stall-proof design with patented shuttle valve
Automotive Cleaning and Recycling; Chemical Transfer and dispensing; Bag-In-Box chemicalsParts Washers; Car Wash Systems
Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.
|
213.19 |
|
|
Flojet G57-5215 Pump Air 5.5/100 Santo 1/2
Flojet Diaphragm Pump AOD Air Powered, 1/2” Hose Barb Snap-In Ports, 5.5GPM Max, Polypropylene, Santoprene Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Brass Air Inlet
Model No.: G57 Series
Capable of Air or CO2 drive pressures up to 100PSI (6.9bar)
Highest flow rate for any air pump of comparable size
Robust Design with durable integral mounting
Patented Shuttle Valve, eliminates stalling
Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves
Corrosion Resistant materials capable of handling a wide range of chemicals
Sanitary design with insert molded diaphragm (Santroprene only)
Leak Resistant radial seals, no critical o-ring seals
Quiet Operation with large exhaust muffler
Ease of Installation with all quick disconnect ports
Stall-proof design with patented shuttle valve
Automotive Cleaning and Recycling; Chemical Transfer and dispensing; Bag-In-Box chemicalsParts Washers; Car Wash Systems
Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.
|
213.19 |
|