Flojet G257501A Dual G57 Poly/Santo Pump Flojet Dual Diaphragm Pump AOD Air Powered, 1/2" NPT Inlet and Outlet Ports, 10.0GPM Max, Polypropylene, Santoprene Check Valve Seat and Diaphragm, 1/4" Hose Barb Air Port

Flojet 02090-118 Pressure Switch 40Psi 4300 Series Pumps Flojet 02090-118 is a pressure switch replacement kit for Flojet 4300 Series pumps. It is a 40 psi direct mount for the Series 4305 pump. Fits the following pump models: 4305-143, 4305-144, 4305-343, 4305-443, 4325-043, 4325-143.    

Flojet D71X000A Mpu 12V B/B 3C N/Sw Bp60 Flojet Duplex II Diaphragm Pump, with Polypropylene Body Construction, Buna Diaphragm, Buna Check Valve, 50 PSI Pressure Bypass. Motor is 12 Volt DC. Inlet Port is 3/8 inch NPT Female, Discharge Port is 3/8 inch NPT Female.   The Flojet D71X000A Duplex II Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are liquid transfer, spraying, cooling, circulation, filtration and dispensing. This pump is generally used for general Agricultural applications. If pumping a liquid other than water the pump should be flushed with water if applicable after each use.

Flojet D2131I5011A Diaphragm Pump 12V 1.6Gpm Replacement For : Flojet 02135-561   The Duplex II series of pumps incorporate the best technology features developed by Flojet. Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm design combined with the new valves makes the pump capable of pulling higher dry vacuum. Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications. Features : Self priming up to 8 feet (2.4 m). Can run dry without damage. Chemical resistant material. Internal bypass standard. Built-in back flow preventer. Heavy duty ball bearing drive system. UL, CSA and CE models available. Specifications: Diaphragm Pump Duplex II 12V 3/8" FNPT Ports 1.6GPM 60PSI Switch Polypropylene EPDM Valves Santoprene Diaphragm

Flojet 04524-500A Pump 115V S/E 4.5Gpm 45Psi Flojet- Diaphragm Pump Quad, Water Pressure System, VSD, 115V, Automatic Variable Speed for Constant 45PSI Pressure at Up To 5GPM, Santoprene Diaphragm, EPDM Valves, No Accumulator Tank Required, Includes Power Cord and 10/13mm (1/2") Hose Barb Snap-In Port Fittings Features: 4524 Series AC Quad Pump with VSD Module The AC Variable Speed Drive constant pressure pump system matches motor speed to system demand. As more liquid is needed, the motor responds to increase flow. Conversely, as the demand lessens, the motor slows to a "super quiet" speed, always retaining a constant system pressure. The result is exceptionally stable flow and reduced apm draw. The Flojet AC VSD sensorcontrolled pumps provide stable, constantpressure operation on any AC application. Operation from no flow to maximum flow is proportionally controlled, eliminating unwanted pump switch cycling and the need for an accumulator tank. Model No. 4524 Series AC Quad VSD • Maintains steady fluid pressure in response to variable flow demand • No pressure switch • Conserves energy, low amp draw • Quiet running under normal use • Automatically adjusts motor speed to maintain pressure • Improves overall system performance • Eliminates bulky accumulator tank for limited SPACErequirements  

Flojet 20467-006 Kit Check Valve Viton Flojet Viton Check Valve Assembly Kit For N5100 Pumps Use this check valve chamber kit to repair your Flojet N1500 series pump. Check valves allow fluids to flow in one direction while preventing back flow, or reverse flow, from occurring.    Viton

Flojet D3732E1311A Duplex Pump 230V 60Psi Epdm The Duplex II series of pumps incorporate the best technology features developed by Flojet. Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit.  Features : Self priming up to 8 feet (2.4 m). Can run dry without damage. Chemical resistant material. Internal bypass standard. Built-in back flow preventer. Heavy duty ball bearing drive system. UL, CSA and CE models available. Specifications: Diaphragm Pump Duplex II 230V 3/8" FNPT Ports 1.6 GPM No Switch Bypass 50psi Polypropylene EPDM Valves EPDM Diaphragm

Flojet R8600-134A 12V Pump 6Gpm 70Psi Viton Flojet Versijet Series 12V diaphragm pump (R8600134A) with santoprene diaphragm, viton check valve and an output of 4.8 bar / 70 PSI at 22.7 litres per minute. It is a demand pump. This chemical resistant diaphragm pump is suitable for a range of fluid transfer applications. Not approved for pumping fuels.   Max Temperature: 160 degrees F Maximum Pressure: 70 PSI Motor Design: Perm. Magnet TENV (non-ventilated) Voltage: 12 VDC Pump Head Material: Nylon Check Valve Material: Viton Switch: SW70 Duty Cycle: Intermittent Certifications: CE, RoHS, IPX6

Flojet D3621V5011A 115V Pump 60Psi 1.2Gpm Flojet D3621V5011A Duplex Diaphragm Bypass Pump - 60 PSI Bypass, 1.2 GPM, 115 VAC Dry Run Pump   The Flojet D3621V5011A is a double diaphragm pump includes an integrated 115 VAC electric motor. Pump body is made from polypropylene for corrosion and chemical resistance. Self-primes up to 8 feet of vertical lift. Features the ability to run dry without damaging the critical components of the pump and features an internal bypass system protecting the pump from excessive pressures. Drive system utilizes heavy duty ball bearings. Specifications: Voltage: 115 VAC GPM: 1.2 GPM Max. Pressure: 60 PSI Ports: 3/8" FNPT Material: Polypropylene Diaphragm: Viton Check Valve: Viton Motor: Electric Features: Self-priming up to 8 feet (2.4 m) Can run dry without damage  Chemical resistant material Internal bypass standard Built-in back flow preventer Heavy duty ball bearing drive system UL, CSA and CE models available

Flojet 04100-113A Pump 12V 4.5/40 Pgb N/Sw The Flojet 4100-113 has an open flow rate of 4.5 GPM and is fitted with Buna checkvalves and geolast diaphragms. The Flojet 4100 series is a self-priming pump. It may be located several feet from the tank, above or below the liquid level (it is not a submersible pump). For vertical pump mounting be sure that the motor is located on top. This will prevent water from entering the motor chamber in event of a leak.   Compact design and plug-in port fitting make installation easy. Can run dry without damage and handle liquids up to 54° C. No metal contact with liquid being pumped. Ball bearing drive throughout pump and motor assures longer pump life. Excellent self-priming capability. Pump may be located above the liquid level. Powerful, permanent magnet motor with low current draw and long life brushes.

Flojet 04300-515A Mpu 115V 3.3Gpm S/V Sw45 Pc Flojet 04300515A Self-Priming Quad Diaphragm Pump - 35 PSI, 5 GPM, 115 VAC Electric Diaphragm Pump   Flojet's 04300515A pump is a quadruple diaphragm pump that delivers a maximum flow rate of 5 GPM. Pump self-primes up to 2.4m vertical lift. Pump body is manufactured using polypropylene for chemical resistance. Utilizes quick connect plugin ports for easy installation. Specifications: Voltage: 115 VAC Ports: 3/4" Hose Barb Open Flow: 5 GPM Max PSI: 35 Body: Polypropylene

Flojet 04300-525A 115V 3.3Gpm S/V Sw45 Flojet 04300525A Electric Quad Series Diaphragm Pump With 6 Ft. Cord - 5 GPM, 35 PSI, 115VAC Polypropylene Pump & Motor Assembly   The Flojet 04300525A pump is part of the Flojet 4300 Quad Series. This versatile pump cam be used for car wash services, water treatment, filtering, and more. It is made with chemical resistant materials including a Polypropylene body, a Viton check valve, and a Santoprene diaphragm. The Flojet 04300525A pump includes 3/4" snap-in hose barb style ports and a 6' power cord. It has a 35 PSI maximum pressure rating and a flow rate of 5 GPM. Quiet, smooth, and safe operation! Specifications and Benefits: 5 GPM 35 PSI 115 volt AC 3/4" hose barb inlet 3/4" hose barb outlet Polypropylene housing Viton check valve Santoprene diaphragm 6' power cord Snap-in ports for easy installation 130° Fahrenheit maximum fluid temperature Built-in pressure switch automatically starts and stops Can run dry without damage Excellent self-priming capability (up to 8 feet vertical) Powerful magnet motor with low current draw 4 piston design delivers high flow rates Handles water-like and viscous liquids up to 250 cP CE Certified

Flojet 04300-531A Mpu 115V S/E Pse Sw40 Flojet 04300531A Self-Priming Quad Diaphragm Pump - 35 PSI, 3.5 GPM, 115 VAC Pump and Electric Motor   Flojet's 04300531A is a quadruple diaphragm pump with a four-piston design that delivers a high flow rate reaching a maximum of 3.5 GPM. Pump self-primes up to 2.4m vertical lift. Pump body is manufactured using polypropylene for its chemical and corrosion resistant properties. Equipped with a 1/2-inch hose barb inlet and a 1/2-inch male Quest outlet. Compatible with 115 VAC electrical connections. Specifications: Voltage: 115 VAC Inlet: 1/2" Hose Barb Outlet: 1/2" Male Quest Flow: 3.5 GPM Max PSI: 35 PSI  Body: Polypropylene] Check Valve: EPDM  Diaphragm: Santoprene Option: Pressure Switch Features: Self-primes up to 2.4m vertical lift Handles Water-Like and Viscous Liquids up to 250 cP Four-piston design delivers higher flow rates Chemical-resistant polypropylene pump head for Iong life Choice of elastomeric materials to work with many chemicals Quick-connect plug-in ports for easy installation Optional pressure-switch control to run the pump only as needed  

Flojet 04300-529A Mpu 115V S/V 3C Sw40 Flojet 04300529A Electric Quad Series Diaphragm Pump With 6 Ft. Cord - 3.5 GPM, 35 PSI, 115VAC Polypropylene Pump & Motor Assembly   The Flojet 04300529A pump is part of the Flojet 4300 Quad Series. This versatile pump cam be used for low-pressure car wash services, water treatment, filtering, and more. It is made with chemical resistant materials including a Polypropylene body, a Viton check valve, and a Santoprene diaphragm. The Flojet 04300529A pump includes 1/2" snap-in hose barb style ports and a 6' power cord. It has a 35 PSI maximum pressure rating and a flow rate of 3.5 GPM. Quiet, smooth, and safe operation! Specifications and Benefits: 3.5 GPM 35 PSI 115 volt AC 1.8A maximum amps Continuous duty induction motor 1/2" hose barb inlet 1/2" hose barb outlet Polypropylene housing Viton check valve Santoprene diaphragm 6' power cord Snap-in ports for easy installation 130° Fahrenheit maximum fluid temperature Can run dry without damage Excellent self-priming capability (up to 8 feet vertical) Powerful magnet motor with low current draw 4 piston design delivers high flow rates Handles water-like and viscous liquids up to 250 cP CE Certified

Flojet 02100-022 Diaphragm Pump 115V Flojet 2100-022 Pump and Motor unit, 115 Volt, 1.6 Gpm, 60 Psi (max). Polypropylene Body Construction, W/ Viton Diaphragm, Viton Check Valve, and c/w Pressure Switch.