Flojet D3131B1311A Mpu 12V B/B 2C Sw Bp50 Flojet D3131B1311A Duplex Diaphragm Bypass Pump - 45 PSI Switch, 1.5 GPM, 12 VDC The Flojet D3131B1311A is a double diaphragm pump includes an integrated 12 VDC electric motor. Pump body is made from polypropylene for corrosion and chemical resistance. Ability to self-prime and handles waterlike and viscous liquids. Designed with an internal bypass system protecting the pump from excessive pressures. Specifications: Voltage: 12 VDC GPM: 1.5 Max. Pressure: 45 PSI Material: Polypropylene Diaphragm: Buna Check Valve: Buna Motor: Electric

Flojet A101030-411 Mpu 115V Bun 2C N/Sw  

Flojet D3135E7011 Mpu E/E 3C Sw100Bp Flojet- Diaphragm Pump Duplex II 12V, 3/8”FNPT Ports, 2.0GPM, 100psi Switch, Polypropylene, EPDM Valves, EPDM Diaphragm

Flojet 20406-011A P/H Quad S/E 3C N/Sw  

Flojet 20406-018A P/H Quad S/V 3C N/Sw  

Flojet D71X000A Mpu 12V B/B 3C N/Sw Bp60 Flojet Duplex II Diaphragm Pump, with Polypropylene Body Construction, Buna Diaphragm, Buna Check Valve, 50 PSI Pressure Bypass. Motor is 12 Volt DC. Inlet Port is 3/8 inch NPT Female, Discharge Port is 3/8 inch NPT Female.   The Flojet D71X000A Duplex II Pump is designed for a wide range of applications and is constructed from a selection of materials suitable for handling a broad range of chemicals. Typical pump uses are liquid transfer, spraying, cooling, circulation, filtration and dispensing. This pump is generally used for general Agricultural applications. If pumping a liquid other than water the pump should be flushed with water if applicable after each use.

Flojet D21X003A MPU 12V 1.8Gpm S/V NSW BP60

Flojet D3231B1311AR Mpu 24V B/B 2C N/Sw Bp50 The Duplex II series of pumps incorporate the best technology features developed by Flojet. Everything from the back flow preventer, check valves, bearings and diaphragm assembly to the motor, have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm design combined with the new valves makes the pump capable of pulling higher dry vacuum. Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications. Features : Self priming up to 8 feet (2.4 m). Can run dry without damage. Chemical resistant material. Internal bypass standard. Built-in back flow preventer. Heavy duty ball bearing drive system. UL, CSA and CE models available. Specifications: Diaphragm Pump Duplex II 24V 3/8" FNPT Ports 1.6GPM No Switch Bypass 50psi Polypropylene Buna Valves Buna Diaphragm. Full RFI Noise Suppression

Flojet D3135E1411A Mpu 12V E/E 3C N/Sw Bp70  Flojet- Diaphragm Pump Duplex II 12V, 3/8”FNPT Ports, 2.0GPM, Bypass 70psi, Polypropylene, EPDM Valves, EPDM Diaphragm

Flojet 03811-143A Mpu 12V S/E 3C Sw150Bp Flojet 03811133A Self-Priming High Pressure Triplex Pump - 150 PSI, 1.4 GPM, 12 VDC Electric Pump   Flojet's 03811133A pump features a unique three-chamber design that delivers an flow rate of 1.4 GPM. Handles pressures up to a maximum of 150 PSI. Well-suited for spraying, misting, filtration, cooling, dispensing, and pressure boosting. NPTF Threaded inlet and outlet ports with a diameter that measures 3/8 inches. Specifications: Open Flow: GPM 1.4  Switch Pressure: PSI 150 Check Valve: Viton¨  Diaphragm: Santoprene¨  Voltage: 12 VDC  Duty Cycle: Intermittent  Port Size: 3/8" NPTF Motor Design Perm. Magnet TENV (non-ventilated) Pump Head Material: Glass Filled Nylon Certifications: CE, NSF components Features: Flow rates up to 1.4 GPM (5.3 LPM) and operating pressure of up to 150 psi (10.3 bar) Constructed from a selection of materials suitable for handling a broad range of chemicals Innovative bypass design Self-priming up to 8ft (2.4m) Sealed motor Can run dry for extended periods of time without damage Coinjected molded diaphragm technology Consistent pressure over time  

Flojet 03811-133A Mpu 12V S/V 3C Sw150 Bp Flojet 03811133A Self-Priming High Pressure Triplex Pump - 150 PSI, 1.4 GPM, 12 VDC Electric Pump   Flojet's 03811133A pump features a unique three-chamber design that delivers an flow rate of 1.4 GPM. Handles pressures up to a maximum of 150 PSI. Well-suited for spraying, misting, filtration, cooling, dispensing, and pressure boosting. NPTF Threaded inlet and outlet ports with a diameter that measures 3/8 inches. Specifications: Open Flow: GPM 1.4  Switch Pressure: PSI 150 Check Valve: Viton¨  Diaphragm: Santoprene¨  Voltage: 12 VDC  Duty Cycle: Intermittent  Port Size: 3/8" NPTF Motor Design Perm. Magnet TENV (non-ventilated) Pump Head Material: Glass Filled Nylon Certifications: CE, NSF components Features: Flow rates up to 1.4 GPM (5.3 LPM) and operating pressure of up to 150 psi (10.3 bar) Constructed from a selection of materials suitable for handling a broad range of chemicals Innovative bypass design Self-priming up to 8ft (2.4m) Sealed motor Can run dry for extended periods of time without damage Coinjected molded diaphragm technology Consistent pressure over time

Flojet 04300-529A Mpu 115V S/V 3C Sw40 Flojet 04300529A Electric Quad Series Diaphragm Pump With 6 Ft. Cord - 3.5 GPM, 35 PSI, 115VAC Polypropylene Pump & Motor Assembly   The Flojet 04300529A pump is part of the Flojet 4300 Quad Series. This versatile pump cam be used for low-pressure car wash services, water treatment, filtering, and more. It is made with chemical resistant materials including a Polypropylene body, a Viton check valve, and a Santoprene diaphragm. The Flojet 04300529A pump includes 1/2" snap-in hose barb style ports and a 6' power cord. It has a 35 PSI maximum pressure rating and a flow rate of 3.5 GPM. Quiet, smooth, and safe operation! Specifications and Benefits: 3.5 GPM 35 PSI 115 volt AC 1.8A maximum amps Continuous duty induction motor 1/2" hose barb inlet 1/2" hose barb outlet Polypropylene housing Viton check valve Santoprene diaphragm 6' power cord Snap-in ports for easy installation 130° Fahrenheit maximum fluid temperature Can run dry without damage Excellent self-priming capability (up to 8 feet vertical) Powerful magnet motor with low current draw 4 piston design delivers high flow rates Handles water-like and viscous liquids up to 250 cP CE Certified

Flojet D3631V1311A Mpu 115V V/V Lc N/Sw Bp5 Flojet Diaphragm Pump Duplex II 115V, 3/8”FNPT Ports, 1.6GPM, 50psi Bypass, Polypropylene, Viton Valves, Viton Diaphragm

Flojet D3131V5011A Mpu 12V V/V 3C Sw60  Flojet- Diaphragm Pump Duplex II 12V, 3/8”FNPT Ports, 1.6GPM, 60psi Switch, Polypropylene, Viton Valves, Viton Diaphragm

Flojet D2132I5011A Mpu 12V Flojet D2132I5011A Duplex Diaphragm Bypass Pump - 60 PSI Bypass, 1.6 GPM, 12 VDC The Flojet D2132I5011A is a double diaphragm pump includes an integrated 12 VDC electric motor. Pump body is made from polypropylene for corrosion and chemical resistance. Self-primes up to 8 feet of vertical lift. Features the ability to run dry without damaging the critical components of the pump and features an internal bypass system protecting the pump from excessive pressures. Drive system utilizes heavy duty ball bearings. Specifications: Voltage: 12 VDC GPM: 1.6 GPM Max. Pressure: 60 PSI Ports: 3/8" FNPT Material: Polypropylene Diaphragm: Buna-N Check Valve: Viton Motor: Electric Features: Self-priming up to 8 feet (2.4 m) Can run dry without damage  Chemical resistant material Internal bypass standard Built-in back flow preventer Heavy duty ball bearing drive system UL, CSA and CE models available