|
BURKS 37GA5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.81 Inches.
UNSPSC Code: 40150000
|
1460.70 |
|
|
BURKS 37G5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 4 Inches.
UNSPSC Code: 40150000
|
1591.20 |
|
|
Applications for the TE-7R-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
March Pump's industrial TE-7R-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7R-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
60 FT
12.3 M
Power
.75 HP
.559 KW
Electrical
1PH 115/230V or 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing)
Motor Options
Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
|
1054.80 |
|
|
March TE-6T-MD-3PH 3/4HP WEG Poly Glass Pmp W/3Ph 3/4Hp
|
954.90 |
|
|
Oberdorfer 300BP-30M36BJT Centrif Pump 3Ph 3/4Hp
This item is 'build to order'. Please contact us for lead time.
|
1868.26 |
|
|
Applications for the TE-7K-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.
March Pump's industrial TE-7K-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of carbon filled Kynar (PVDF), Viton, Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 75PSI, and the maximum liquid temperature is 200 Fahrenheit or 93 Celsius. The March TE-7K-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
60 FT
12.3 M
Power
.75 HP
.559 KW
Electrical
1PH 115/230V or 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
Carbon Filled Kynar (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing)
Motor Options
Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
|
1400.40 |
|
|
Applications for the TE-7R-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, bicarbonate systems, deionized water systems, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, ion exchange recovery, and aquariums.
March Pump's industrial TE-7R-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 60 Feet (or around 26PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Ryton/Teflon/Carbon, and Ceramic. The inlet connection is 1.5 inch female pipe thread, and the outlet is 1 inch male pipe thread. The standard motor is a 1 Phase 115/230V or 3 Phase 230/460V 0.75 Horsepower totally enclosed fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March TE-7R-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
53 GPM
180 LPM
Max Head
60 FT
12.3 M
Power
.75 HP
.559 KW
Electrical
1PH 115/230V or 3PH 230/460V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
1-1/2"FPT
Outlet
1"MPT
Wet End
Polypropylene (Front Housing, Impeller), Ryton (Rear Housing), Viton (O-Ring), Ceramic (Shaft, Thrust Washer), Ryton/Teflon/Carbon (Bushing)
Motor Options
Available in .75HP, 1HP, 1.5HP, 1HP Explosion Proof, or 1.5HP Explosion Proof
|
1118.70 |
|
|
Calpeda NM2/A 07H36S Centrifugal Pump 3Ph 3/4Hp
The motor of the Calpeda NM2/A 07H36S centrifugal pump has a power rating of three-quarters horsepower.
Calpeda Model number is NM 2/A-60
Three-phase 230/460 V
Insulation class F
Protection IP 44
Pump casing: Cast iron
Lantern bracket: GJL 200 EN 1561
Impeller: Brass CW510L (lead-free public LAW 111-380)
Shaft: Cr steel AISI 430
Cr Ni steel AISI 302 for 1 - 1.5 - 2.5 - 3 HP
Mechanical seal: Carbon- Ceramic- NBR
Liquid temperature from 14 F to 194 F
Ambient temperature up to 104 F
Total suction lift up to 23 ft
Maximum permissible working pressure up to 145 psi
(232 psi for pumps NMD)
Continuous duty
For clean liquids without abrasives, which are, non-aggressive
For the pump materials ( solids content up to 0.2%)
For water supply
For heating, air-conditioning, cooling, and circulation plants
For civil and industrial applications
For irrigation
|
790.02 |
|
|
Calpeda NM25-12B/A Cast Iron Pump
NM 25/12B/A 230/400V 0,55kW 2900rpm
Close-coupled centrifugal pump with electric motor and extended shaft directly connected to the pump.
NM: single-Impeller.
Connections: threaded ports ISO 228/1 (BS 2779).
NM, NMD: version with pump casing and lanter bracket in cast iron.
B-NM, B-NMD: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
For clean liquids without abrasives, which are non-aggressive for the pump materials (solids content up to 0.2%)
For water supply
For heating, air-conditioning, cooling and circulation plants
For civil and industrial applications
For fire fighting applications
For irrigation
|
567.19 |
|
|
Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump
80gpm, 1-1/4" Outlet 3/4HP 3PH
|
5122.39 |
|
|
Calpeda BCM22/A Motor and Pump
Calpeda's BC-series monobloc centrifugal pumps are complete with open impeller. Available in either cast iron or bronze, single-phase or three-phase.
Close-coupled centrifugal electric pumps with open impeller.
Backward (vortex) impeller for type C 16/1E.
C: version with cast iron pump body and fitting.
B-C: version with bronze pump body and fitting.
Bronze pumps are supplied fully painted.
For liquids moderately charged with impure emulsions.
For industry and agriculture.
For Marine AC Water Pump
Liquid temperature from -10 °C to +90 °C.
Ambient temperature up to 40 C.
Total suction lift up to 8 m.
Maximum permissible working pressure: 6 bar.
Maximum size of solids: 4 mm.
Continuous duty.
|
1057.20 |
|
|
Heavy Duty Bilge Pump 2200 Series - 12V
The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design.
FREE Automatic Switch AS888
For full automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 automatic switch has a time-proven micro switch without mercury. When water exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. The AS888 attaches to any SPX Johnson Pump Marine bilge pump through the clip on "T-slot" and can be used with 6, 12, 24 or 32V systems. Use AS888 for a better and safer life afloat!
Specials Rebates Close Outs Remanufactured
|
|
|
Jabsco 12490 Series Self Priming Stainless Steel Pump
FEATURES
Pump Body:
316 Stainless Steel
Port Size:
1" NPT internal
Flow:
26.0 GPM at 10 feet of head
Pressure:
Up to 26 PSI
Impeller:
Neoprene or Nitrile
Shaft Seal:
Lip Type in Stainless Steel Case
Shaft:
Steel motor shaft with special Stainless Steel sleeve.
Motor:
3/4 HP, 1725 RPM, 60 Hz Single Phase, 115/230 Vac, Continuous Duty, Totally Enclosed Fan Cooled, 56 Frame, Capacitor Start. Thermal Overload Protection with Automatic Reset, Carrying Handle, 6' Cord with 3 Prong Grounded Plug.
APPLICATIONS / CHARACTERISTICS
CHEMICAL - Industrial Motor Pump Unit Circulating, Transferring and Filtering of Chemicals, Plating Solutions, Pharmaceuticals, cosmetics and Farm Chemicals, Emptying and Filling Carboys, Vats, Tanks, Barrels or Entire Systems.
Jabsco Self Priming Stainless Steel Pump 1" NPT Ports 3/4HP Motor Nitrile Impeller
|
2303.80 |
|
|
BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC
Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.
UNSPSC Code: 40150000
|
1832.40 |
|
|
BURKS T350G6-1 1/2, CENTRIFUGAL PUMP 3PH 5HP TEFC
Close Coupled, 60 Hz, Three Phase, 3500 RPM, 5 Horsepower, TEFC Motor Enclosure, Frame Size 184JM
UNSPSC Code: 40150000
|
3661.31 |
|