|
Calpeda CM22/A Motor and Pump
Close-coupled Centrifugal Pump with open impeller
Single Phase 230v with Thermal Proctector.
Capacitor is inside the terminal box
|
783.60 |
|
|
Calpeda BCM22/A Motor and Pump
Calpeda's BC-series monobloc centrifugal pumps are complete with open impeller. Available in either cast iron or bronze, single-phase or three-phase.
Close-coupled centrifugal electric pumps with open impeller.
Backward (vortex) impeller for type C 16/1E.
C: version with cast iron pump body and fitting.
B-C: version with bronze pump body and fitting.
Bronze pumps are supplied fully painted.
For liquids moderately charged with impure emulsions.
For industry and agriculture.
For Marine AC Water Pump
Liquid temperature from -10 °C to +90 °C.
Ambient temperature up to 40 C.
Total suction lift up to 8 m.
Maximum permissible working pressure: 6 bar.
Maximum size of solids: 4 mm.
Continuous duty.
|
1057.20 |
|
|
Calpeda NM2/A 07H36S Centrifugal Pump 3Ph 3/4Hp
The motor of the Calpeda NM2/A 07H36S centrifugal pump has a power rating of three-quarters horsepower.
Calpeda Model number is NM 2/A-60
Three-phase 230/460 V
Insulation class F
Protection IP 44
Pump casing: Cast iron
Lantern bracket: GJL 200 EN 1561
Impeller: Brass CW510L (lead-free public LAW 111-380)
Shaft: Cr steel AISI 430
Cr Ni steel AISI 302 for 1 - 1.5 - 2.5 - 3 HP
Mechanical seal: Carbon- Ceramic- NBR
Liquid temperature from 14 F to 194 F
Ambient temperature up to 104 F
Total suction lift up to 23 ft
Maximum permissible working pressure up to 145 psi
(232 psi for pumps NMD)
Continuous duty
For clean liquids without abrasives, which are, non-aggressive
For the pump materials ( solids content up to 0.2%)
For water supply
For heating, air-conditioning, cooling, and circulation plants
For civil and industrial applications
For irrigation
|
790.02 |
|
|
Calpeda NM25-12B/A Cast Iron Pump
NM 25/12B/A 230/400V 0,55kW 2900rpm
Close-coupled centrifugal pump with electric motor and extended shaft directly connected to the pump.
NM: single-Impeller.
Connections: threaded ports ISO 228/1 (BS 2779).
NM, NMD: version with pump casing and lanter bracket in cast iron.
B-NM, B-NMD: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted).
For clean liquids without abrasives, which are non-aggressive for the pump materials (solids content up to 0.2%)
For water supply
For heating, air-conditioning, cooling and circulation plants
For civil and industrial applications
For fire fighting applications
For irrigation
|
567.19 |
|
|
AMT Pump 2825-95 Pump Cast Iron Self Prime 3/4Hp 1Ph
Pump Body: Cast Iron
Shaft Seal: Buna-N Shaft Seal
Port Size: 1-1/2 inch x 1-1/2 inch NPT Ports.
Motor Specs : 3/4 Horsepower, 115/230 Volts, Single Phase, ODP (Open Drip Proof) NEMA 56J Frame Electric.
Product Specs :
Cast Iron Construction with Buna-N Seals
Handles 3/8 Inch Diameter Semi-solids
NEMA 56J Motors with Stainless Steel Shaft
Maximum Working Pressure 75 PSI
Self-primes to 20 Ft.
Self-cleaning, Clog Resistant Impeller
Steel Base and Handle Included
Dual Volute Design
|
695.25 |
|
|
MP Pumps 21380 Flomax 15 NPT Self Priming Centrifugal Pump
Pedestal Drive Bronze, 6.0" Impeller, 3" x 3"
MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in all bronze construction.
Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 300 GPM Maximum Discharge Pressure: 125 feet (54 PSI)
Suction & Discharge Connections: 3" X 3" FNPT
Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft; viton mechanical seal.
This item is 'build to order'.
|
6366.98 |
|
|
MP Pump 28399 Flomax 8 Pump SS: Ped 5.0
MP Pumps Flomax 8, 2" 140 GPM Stainless Steel Pedestal Mount Self Priming Pump 28399
MP Pumps Flomax 8, 2" NPT self priming centrifugal pumps # 28399. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM, all stainless steel construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 140 GPM Maximum Discharge Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Construction: Stainless Steel housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss, weight 49 lbs.; 304 stainless steel stub shaft; viton mechanical seal. Motor: None
Pump Capacity - MP Pumps Flomax 8 Self Priming Pumps At 0 Suction Lift, 3600 RPM
HPImp.Capacity At Total Dynamic Head In FeetShut
Off
20'30'40'50'60'70'80'90'
Gallons Per Minute (GPM)
1-1/24.10"105856020----54'
24.62"12711090704515--74'
35.0"1501401201008060401596'
|
2854.01 |
|
|
Little Giant Submersible Pump 518203
Little Giant PE-1H Statuary Fountain Pump
Motor 115 Volt 60 Hz 1/125 HP Epoxy Encapsulated Oil-Less Direct Drive Motor, 170 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Hooded Volute with Snap Off Screen, Outlet: 1/4" MNPT or 1/2" Tubing, Fluid Temperature Up to 120F (49C), UL/CSA Listed, 6 Foot Power Cord
518203 Small submersible epoxy-encapsulated pump for commercial, industrial and home use. Applications include statuary fountains, water displays, air conditioners, machine tools, and many other applications where liquid must be transferred or recirculated.
Not recommended for fuel oil transfer, aquariums, and swimming pools.
|
130.26 |
|
|
MP Pumps 21338 PUMP FM8 BRZ PED MNT
MP Pumps Flomax 8, 2" NPT self priming centrifugal pumps # 21338. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM, all bronze construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 140 GPM Maximum Discharge Head
92 feet (40 PSI) Suction & Discharge Connections
2" X 2" FNPT
Construction:
Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss
weight 49 lbs.
304 stainless steel stub shaft
viton mechanical seal.
|
2989.43 |
|
|
Cal MS-1200-6B Pump 1200Gph 115V with Base and Cord
Centrifugal Pump Stainless and Bronze Body
1200GPH No Flow Control
115V 60Hz with 6 Foot Power Cord
3/4" Male NPT Inlet and 1/2" Male NPT Outlet
Viton Seal
Can Run in Open Air or Submersed
For Fresh or Salt Water up to 110F
Can Be Used With Marine AC Units up to 60,000BTU
Approved for: UL, CE, ABYC and USCG
Includes 2 Nylon Mounting Brackets
|
456.00 |
|
|
MP Pumps 36381 CHEMFLO 1 CFB End Suction Centrifugal Pump
316 Stainless Steel, 1-1/2" x 1" NPT Ports, Capacity up to 103 GPM, Total Head up to 128 ft.
CFB2PPK B: 1.5-1 56C 5.25
|
1101.60 |
|
|
MP Pumps 23234
Series 200 Standard End Suction Centrifugal Pump End Only, 2-1/2" x 2" NPT Ports, Capacity up to 300 GPM, Total Head up to 115 feet. S200PPK C: RR 2.5X2 CFR 1.12 4.62 IMP
|
1580.40 |
|
|
MP Pumps 25750, Series 130 Standard End Suction Centrifugal Pump
2" x 1-1/2" NPT Ports, Capacity up to 160 GPM, Total Head up to 60 feet.
S130PMP B: R 2X1.5 PED CL 25504
|
3221.13 |
|
|
MP Pump 27474 S130Ppk 2X1.5 Cfr 5/8
MP Pumps 27474, Series 130 Standard End Suction Centrifugal Pump End Only, 2" x 1-1/2" NPT Ports, Capacity up to 160 GPM, Total Head up to 60 feet. S130PPK C: 2X1.5 CFR 5/8 3.38 BI
|
1246.50 |
|
|
MP Pump 23220 S30 Pumpak
MP Pumps 23220
Series 30 Standard End Suction Centrifugal Pump End Only
1" x 3/4" NPT Ports
Capacity up to 45 GPM
Total Head up to 40 feet
S30PPK B: RR 1X3/4 CFR 5/8 3.25 IMP
|
1449.00 |
|