|
Cat Pump 357 Plunger Pump 5 Frame
The Cat Pump 357 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Bunea-N] seals and o-rings. The 1725 RPM permits multiple drive options including direct drive, flexible coupling, clutch or belt drive.
Technical Specifications
Max Flow: 5
Min Pressure: 100
Max Pressure: 1500
Inlet Port Size: 0.5
Discharge Port Size: 0.37
RPM: 1725
Drive Type(s): Belt
Material: Nickel Aluminum Bronze (NAB)
|
2123.52 |
|
|
Cat Pump 45 PLUNGER PUMP 5 FRAME
The Cat Pump 45 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings.
Technical Specifications
Max Flow: 4.5
Min Pressure: 100
Max Pressure: 3500
Inlet Port Size: 0.5
Discharge Port Size: 0.37
RPM: 1645
Drive Type(s): Belt
Material: Brass (BB)
|
1379.52 |
|
|
Cat Pump 34964 Clutch 12 Volt
Industrial-duty clutch mated to high-performance Cat Pump increases durability and dependability. Convenient remote control of on-off function optimizes system performance. Superior strength forged rotor, hub and armature offer superior flux and maximum torque for long life. Double groove 7 pulley, A type belt and 16.5mm shaft.
Fits Cat Pumps models 280, 290, 333 and 430 piston pumps and 230, 240 and 270 plunger pumps.
Technical Specifications
Accessory Type: Clutches
Description: 3FR & 4FR Series - 7" Double Groove “A” Belt
|
369.20 |
|
|
Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump with 8110 Motor.
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.5 gpm / 9.5 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
Lead time about one week, this is a Special Order Item
|
1920.48 |
|
|
Cat Pump 271 Plunger Pump 3 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Technical Specifications
Max Flow: 3.5 gpm / 13.2 lpm
Max Pressure: 1500
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1420
Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing
Material: 316 Stainless Steel
|
2702.04 |
|
|
Cat Pump 277 Plunger Pump 3 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Technical Specifications
Max Flow: 3.5 gpm / 13.2 lpm
Max Pressure: 1500
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1420
Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing
Material: Nickel Aluminum Bronze
|
1603.20 |
|
|
Cat Pump 270 Plunger Pump 3 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Technical Specifications
Max Flow: 3.5 gpm / 13.2 lpm
Max Pressure: 1500
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1420
Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing
Material: Brass
|
828.00 |
|
|
Cat Pump 350 Plunger Pump 5 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a chrome-plated brass manifold, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
The 1725 RPM permits multiple drive options, including direct drive with a bell housing and flexible coupling, clutch or belt drive.
Technical Specifications
Max Flow: 5 gpm / 18.9 lpm
Max Pressure: 1500
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing
Material: Brass
|
1059.84 |
|
|
Cat Pump 3520 35 Pfr Pump 35Gpm 2K Psi
CAT Pumps 3520 is a triplex plunger pump designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Perfect for use in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and more. Exclusive high pressure seal design means seals are lubricated and cooled by the solution being pumped. Features 304SS valve assemblies and NBR (Buna-N) seals and O-rings.
Dimensions: 23.86 X 18.11 X 9.72
Features
Triplex design delivers high efficiency and low pulsation.
Durable dual V-Packings are lubricated and cooled by pumped liquid.
Pre-set Lo-Pressure seals provide secondary protection against external leaks and require no packing adjustments.
Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
Specially formulated Seals and V-Packings offer unmatched performance and extended life.
Interchangeable inlet and discharge valves for easy servicing.
Wet-end easily serviced without entering crankcase.
Specifications
Maximum Flow: 25 GPM
Maximum Pressure: 2000 PSI
Maximum Temperature: 140° F
RPM: 870
Inlet Port: 1.5" NPT-F
Outlet Port: 1" NPT-F
|
7349.88 |
|
|
Cat Pump 237 Plunger Pump 3 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
The 1725 RPM permits multiple drive options, including direct drive with a bell housing and flexible coupling, clutch or belt drive.
Technical Specifications
Max Flow: 2.3 gpm / 8.7 lpm
Max Pressure: 1500
Inlet Port Size: 1/2" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Belt, Clutch, Flexible Coupling and Bellhousing
Material: Nickel Aluminum Bronze
|
1603.20 |
|
|
Cat Pump 660 Plunger Pump 15 Frame
This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a forged brass manifold, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings.
Technical Specifications
Max Flow: 10
Min Pressure: 100
Max Pressure: 3000
Inlet Port Size: 3/4"NPT(F)
Discharge Port Size: 1/2"NPT(F)
RPM: 1429
Drive Type(s): Belt
Material: Brass (BB)
|
3009.09 |
|
|
Cat Pump 310 Plunger Pump 5 Frame
This pump is made for continuous duty operation. It requires little to no maintenance and is great for many cycles of a car wash. This triplex designed pumps offer high efficiency and low pulsation. Mounting kits and rails are not included and must be ordered separately.
Pump Features
Lubricated high pressure seals are durable and cooled by pump liquid
Double protection provided by pre-set lo-pressure seals that prevent external leaks
No packing adjustment required
Drive type: belt
Pump Technical Specs
Max Flow: 4 GPM
Pressure Range: 100 - 2200 PSI
Inlet Pressure Range: -5 to 60 PSI (-0.35 to 4 bar)
RPM: 950
|
1059.84 |
|
|
Cat Pump 1051 Plunger Pump 15 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Technical Specifications
Max Flow: 10 gpm / 37.9 lpm
Max Pressure: 2200
Inlet Port Size: 3/4" NPT(F)
Discharge Port Size: 1/2" NPT(F)
RPM: 958
Drive Type(s): Belt, Clutch
Material: 316 Stainless Steel
|
7280.88 |
|
|
Cat Pump 6775-ADP Plunger Pump 60 Frame
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with chrome-plated nickel aluminum bronze manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Technical Specifications
Max Flow: 75 gpm / 283.9 lpm
Max Pressure: 1200
Inlet Port Size: 2" NPT(F)
Discharge Port Size: 1 1/4" NPT(F)
RPM: 650
Drive Type(s): Belt
Material: Brass
Ships by Truck Only
|
22320.32 |
|
|
Cat Pumps 241 2.6GPM Plunger Pump
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
This Cat Pump 241 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
Technical Specifications
Max Flow:3.6
Min Pressure:100
Max Pressure:1200
Inlet Port Size:0.5
Discharge Port Size:0.37
RPM:1725
Drive Type(s):Belt
Material:Stainless Steel (SS)
The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.
|
2702.04 |
|