|
Cat Pumps 241 2.6GPM Plunger Pump
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
This Cat Pump 241 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
Technical Specifications
Max Flow:3.6
Min Pressure:100
Max Pressure:1200
Inlet Port Size:0.5
Discharge Port Size:0.37
RPM:1725
Drive Type(s):Belt
Material:Stainless Steel (SS)
The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.
|
2702.04 |
|
|
Cat Pump 3520 35 Pfr Pump 35Gpm 2K Psi
CAT Pumps 3520 is a triplex plunger pump designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Perfect for use in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and more. Exclusive high pressure seal design means seals are lubricated and cooled by the solution being pumped. Features 304SS valve assemblies and NBR (Buna-N) seals and O-rings.
Dimensions: 23.86 X 18.11 X 9.72
Features
Triplex design delivers high efficiency and low pulsation.
Durable dual V-Packings are lubricated and cooled by pumped liquid.
Pre-set Lo-Pressure seals provide secondary protection against external leaks and require no packing adjustments.
Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
Specially formulated Seals and V-Packings offer unmatched performance and extended life.
Interchangeable inlet and discharge valves for easy servicing.
Wet-end easily serviced without entering crankcase.
Specifications
Maximum Flow: 25 GPM
Maximum Pressure: 2000 PSI
Maximum Temperature: 140° F
RPM: 870
Inlet Port: 1.5" NPT-F
Outlet Port: 1" NPT-F
|
7349.88 |
|
|
Cat Pump 34964 Clutch 12 Volt
Industrial-duty clutch mated to high-performance Cat Pump increases durability and dependability. Convenient remote control of on-off function optimizes system performance. Superior strength forged rotor, hub and armature offer superior flux and maximum torque for long life. Double groove 7 pulley, A type belt and 16.5mm shaft.
Fits Cat Pumps models 280, 290, 333 and 430 piston pumps and 230, 240 and 270 plunger pumps.
Technical Specifications
Accessory Type: Clutches
Description: 3FR & 4FR Series - 7" Double Groove “A” Belt
|
369.20 |
|
|
Cat Pump Pop-Off Valve 1-6Gpm 1000-
|
46.51 |
|
|
Cat Pumps 231 2.3GPM
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
This Cat Pump 231 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Technical Specifications
Max Flow:2.3
Min Pressure:100
Max Pressure:1500
Inlet Port Size:0.5
Discharge Port Size:0.37
RPM:1725
Drive Type(s):Belt
Material:Stainless Steel (SS)
The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.
|
2702.04 |
|
|
Cat Pump 247 is a triplex [three plunger rod] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Technical Specifications
Max Flow:3.6
Min Pressure:100
Max Pressure:1200
Inlet Port Size:0.5
Discharge Port Size:0.37
RPM:1725
Drive Type(s):Belt
Material:Nickel Aluminum Bronze (NAB)
|
1603.20 |
|
|
Cat Pumps 2SF22ES Direct Drive Plunger Pump
Pump Features:
• UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
• Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
• Ultimate portability, less than 11 pounds, less than 10" long
• Regulating unloader is standard on each pump to assure system pressure control and pump protection
Specifications:
• Triplex plunger pump
• Direct drive with electric flange
• Maximum volume: 2.0 GPM
• Maximum discharge pressure: 1200 PSI
• Maximum inlet pressure: 75 PSI
• Maximum pump speed: 3450 RPM
• Minimum horsepower requirements: 1.6 BHP
• Bore: .708" (18mm)
• Stroke: .122" (3.1mm)
• Crankcase capacity: 11 oz. use CAT pump hydraulic oil
• Inlet port: 3/8" FPT
• Discharge ports: Dual 3/8" FPT
• By-pass port: 1/4" FPT
• Dimensions: 9.13" x 6.65" x 6.50"
|
606.00 |
|
|
Cat Pump 92241 Oil Bubble Gauge with Gasket
New oil gauge for CAT pumps. Bubble style gauge. Authentic CAT Pumps component.
|
11.19 |
|
|
Cat Pump 1K303 Submersible Pumps
1K Series – Submersible Sump Pumps Stainless steel submersible sump pumps offer solutions to pumping semi-dirty water or fresh water with suspended solids up to 3/8".
Flow Range Up to 88 gpm Pressure Range (up to 24 PSI) 55 ft. Head RPM 3450 rpm Discharge Fitting 1-1/4", 1-1/2" NPT(F) Horsepower 1/3, 1/2, 3/4, 1, 1-1/2 HP Operation Manual or Automatic Maximum Temperature Continuous 122°F Intermittent 140°F Maximum Solids Diameter 3/8"
|
1267.20 |
|
|
General Pump WM4215CL Reverse Osmosis Pump
The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump.
This General Pump WM4215CL has dual inlet and outlet porting. It features the following specs: right hand, 5/8" hollow shaft, 4.2 GPM, 1500 PSI, 1750 RPM
Product Description
Reverse Osmosis Pump - Right Shaft
This pump is from the General Pump WM Series. It is a reverse osmosis, hollow shaft pump with roller bearings. See Related Products for compatible pump oil.
• 316 stainless steel wet-end
• 300 Series stainless steel fasteners
• Parallel inlet and outlet valve design for efficiency and easy maintenance
• Corrosion resistant valve and packing design
• Innovative wear resistant high and low-pressure seals
• Dual inlet and outlet porting
• Anodized crankcase for corrosion resistance
• NEMA 56C flange with 5/8” hollow shaft
Technical Specifications
Bore: 18 mmStroke: 12.5 mmC
rankcase Capacity: 12 oz.Max
Temperature: 140º F
Inlet Port: 1/2"Shaft
Diameter: 5/8"Max
GPM: 4.2Max
PSI: 1500
RPM: 1750
|
3462.72 |
|
|
Cat Pump 8120 Motor 2Hp 1Ph 115/208-230V
The CAT Pumps 8120 is a 2 horsepower, 1 phase,60 Hz Electric Motor, electric powered industrial duty motor. It runs a maximum speed of 1750 RPM. Compatible with 115/208-230V electrical connections. Shaft diameter measures 5/8". The motor is housed in a 56HC frame.
Specifications:
Horsepower: 2
Shaft Diameter: 5/8"
Maximum Volts: 115/208-230V
Frequency: 60 Hz
Full Load Amps: 17.2/9.53–8.62
RPM: 1750
Thermal Overload: No
Phase: 1
Frame Size: 56HC
Service Factor: 1.4
CSA, CE and UL recognized
|
735.36 |
|
|
Cat Pump 310 Plunger Pump 5 Frame
This pump is made for continuous duty operation. It requires little to no maintenance and is great for many cycles of a car wash. This triplex designed pumps offer high efficiency and low pulsation. Mounting kits and rails are not included and must be ordered separately.
Pump Features
Lubricated high pressure seals are durable and cooled by pump liquid
Double protection provided by pre-set lo-pressure seals that prevent external leaks
No packing adjustment required
Drive type: belt
Pump Technical Specs
Max Flow: 4 GPM
Pressure Range: 100 - 2200 PSI
Inlet Pressure Range: -5 to 60 PSI (-0.35 to 4 bar)
RPM: 950
|
1059.84 |
|
|
Walbro FRC-8-2 Industrial 12V Fuel Pump 12Psi
Industrial Reciprocating Fuel Pump Genuine Walbro Part # FRC-8-2 12 Volt Up to 12 PSI
Voltage: 12 Volt (9.0 min - 16.0 vdc max)
Minimum Flow Rate: 106 liters per hour (28 gph)
Deadhead Pressure: 62 to 83 kPa (9.0 to 12.0 psi)
Maximum Current Draw: 2.3 ampsLife: >8,000 hours
Dry Lift: 48 inches
Compatible Fuels: No-lead regular gasoline, premium gasoline, gasoline-alcohol blends, diesel and biodiesel fuels (20% and 100%), and E85
Corrosion Resistance: 96 hour salt spray test (ASTM B-117)Operating Temperature Range: -40ºF to 155ºF (-40ºC to 68.3ºC)
Electrical
Reverse Voltage Protected Transient Voltage Protection
Ground: Circuit Board is Internally Grounded to Pump Body
Electrical Connector: Packard Electric (Accepts mating connector 12015782)
Fuse: 5 amp recommended
Mechanical
Inlet & Outlet Size: 1/8-27 NPSF
Inlet Filter Screen: 70 micron
Magnetic Trap Standard
Outlet Check Valve: Yes
20 micron Filter Screen
The FRC series fuel pump is designed to supply fuel for internal combustion engine applications only. It is not intended or designed for continuous operation applications such as heater or stove systems.
|
461.18 |
|
|
Cat Pump 357 Plunger Pump 5 Frame
The Cat Pump 357 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Bunea-N] seals and o-rings. The 1725 RPM permits multiple drive options including direct drive, flexible coupling, clutch or belt drive.
Technical Specifications
Max Flow: 5
Min Pressure: 100
Max Pressure: 1500
Inlet Port Size: 0.5
Discharge Port Size: 0.37
RPM: 1725
Drive Type(s): Belt
Material: Nickel Aluminum Bronze (NAB)
|
2123.52 |
|
|
Cat Pump 76056.3FR Bell Housing
Cat Pumps Direct-Drive Bell Housings provide a compact direct mounting feature resulting in reduced space requirements compared to belt or gearbox assemblies. Bell Housings also eliminate the need for belt selection, sizing, and adjustment. For a complete drive package, combine with Cat Pumps Flexible Couplings designed for extended life in high temp and high RPM conditions.
Model 76056.3FR Bell Housing adapts to Cat Pumps 3 Frame plunger pumps and mounts directly to 56C - 145C motors. Refer to the data sheet for proper selection and more detailed information.
Technical Specifications
Accessory Type: Bell Housings
Description: 3FR Series to 56C-145TC NEMA Motor
|
138.58 |
|