Ampco Pumps AC216MD56C-S/VITON Peo 2 X 1 1/2 Kit

Ampco GX5039902 Casing Gasket KC2 1 1/2 X 1 Ampco Pump Repair Part GX5039902 Gasket Casing/Cover. Designed for 1-1/4 X 1 (Nickle Aluminum Bronze/Stainless Steel), 1-1/2 X 1 (Nickle Aluminum Bronze/Stainless Steel) pump models.  

Ampco Ac216Md14T-S, Viton Pump End Only with Max Impeller

Ampco Pumps AC216MD14T-S Peo 2 X 1 1/2 Kit Ampco's AC Series pumps have standard stainless steel adapters and type D,DG & E seals available. The Ampco AC Series pumps are in conformance with 3A Sanitary Standards for centrifugal and positive rotary pumps for milk and milk products. # 02-10 This Ampco AC Series pumps also have a standard 32RA (150 grit) finish on all product surfaces.

Ampco Fluid End Aluminum Bronze Full Size

Ampco ICPLUS214-180TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.

Ampco ICPLUS216-250TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.  

Ampco ICPLUS218-280TC, 2" X 1.5" 316SS Fluid End Only The IC+ Series is an adaptation of the popular AC/AC+ Series sanitary pump line-up, matching its hydraulic performance and external footprint.   Some of the most common applications for the IC+ include grey water processing and in-plant booster pumps for non-sanitary water supply.   The IC+ Series centrifugal pump is a cost effective solution for industrial applications where cast iron pumps are not recommended.   Constructed of 316L stainless steel, the IC+ offers a beaded finish fluid end and includes a 304 stainless steel adapter. The IC+ is built with a simple and common internal Type 21 single mechanical seal and the standard connection type is NPT (National Pipe Thread) or flange fittings.   The standard connection type is NPT (National Pipe Thread) or flange fittings.  

Ampco Pumps AC114MD56C-3.75 Peo 1 1/2 X 1 1/2 Kit 3.75

Ampco AC114 Beverage Beer Pump Cart Ampco beverage beer pump cart is suitable for AC114 sanitary centrifugal pump   Can be used for all wort and beer transfer, as well as CIP (clean in place) functions Ampco sanitary AC114 pump with 10-1/2 x 1-1/2 in tri-clamp connections Rated for 70 gpm at 45 ft TDH 1.5 hp, 115 VAC 1 ph 20 A circuit Manual dial VDF in waterproof enclosure Pre-wired with 25 ft extension cord with 3-prong 115 VAC wall plug Sanitary design compact stainless steel cart with solid urethane wheels and cord hanger   Please allow a lead-time of about 7-10 days.

Ampco Kc2 1 1/2 X 1 1/4 Niaibz Fluid End  

Ampco Pumps CB+114M14T-S-3.75 Peo 1 1/2 X 1 1/2 Kit

Ampco Pumps CB+114MB56C-S Peo 1 1/2 X 1 1/2 Kit

FEATURES Pump Body: Nylon/Polypropylene Valve Housing: Polypropylene Port Size: 2 x 1/2" barb and 3/8" NPT 2 x 3/4" barb and 1/2" NPT Flow: 5.0 GPM Pressure: Shut-Off: 3.45 bar/50 PSI Valves: Santoprene/EPDM Diaphragm: Santoprene Motor: 12 or 24 VDC with built in thermal protection The motor is ignition protected according to ISO 8846 (Small craft – Electrical devices – Protection against ignition of surrounding flammable gases).     APPLICATIONS / CHARACTERISTICS The Flow Master 5.0 is a five chamber positive displacement diaphragm pump that is an ideal choice for pressurizing water in a closed system such as that found in a boat or Recreational Vehicle (RV). The digital controller adjusts water flow as the demand is increased and decreased while maintaining a very smooth flow. The unique variable flow feature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still maintain an even flow regardless if one or multiple taps are being used. Variable speed • Quiet operation • Smooth flowing • Pump is self-priming up to 2.5 m/8.2 ft. • Digital controller turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings     Johnson- Flowmaster Water System Pump 12V 5.0GPM  

BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.   Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.   Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.  Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.    Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.   Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us