|
Amt 4294-98 Centrif Pump, 1" Ss, Viton
1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS
Investment Cast 300 Series Stainless Steel Construction
Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide
1" NPT Port Sizes
Self-priming to 6 ft.
ODP and TEFC, Single or 3 phase 56 frame motors
Available in 1/3 to 2 Horsepower
Delivers up to 66 GPM and 29 PSI
AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability.
AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
887.76 |
|
|
Amt 4298-K8 1" Ss Peo Kit
|
1021.42 |
|
|
MP Pumps 21312, FLOMAX 5 Self Priming Centrifugal Pump
1-1/2" X 1-1/2" NPT Ports, Capacity up to 145 GPM, Total Head up to 100 feet.
FM5PMP C: PED 5.0
MP Pumps Flomax 5, 1-1/2" pedestal mount self priming cast iron pump # 21312. MP Pumps Flomax 5, rated at 100 GPM in cast iron construction with viton mechanical seal.
Specifications
Rated Capacity 100 GPM Maximum Discharge Pressure: 40 PSI Suction & Discharge Connections: 1-1/2" X 1-1/2" FNPT Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft to fit 5/8"; viton mechanical seal.
Features:
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners
Up to a 25' suction lift
5 blade impeller available for higher flows
Base plate shown above is optional
Double seal available for dry run applications
Hydraulic motor .22 cu. in.
Hydraulic motor .37 cu. in.
Hydraulic motor .45 cu. in.
Stainless steel impeller
|
1003.50 |
|
|
Burks T37G5-1 1/4-SS-3.25, Centrifugal Pump
80gpm, 1-1/4" Outlet 3/4HP 3PH
|
5122.39 |
|
|
1" SELF-PRIMING STAINLESS STEEL CENTRIFUGAL PUMPS
Investment Cast 300 Series Stainless Steel Construction
Mechanical Seal Options: Buna-N, Viton®, and Silicon Carbide
1" NPT Port Sizes
Self-priming to 6 ft.
ODP and TEFC, Single or 3 phase 56 frame motors
Available in 1/3 to 2 Horsepower
Delivers up to 66 GPM and 29 PSI
AMT 316 Stainless Steel Transfer pumps are designed to handle liquids and chemicals with specific gravities to 1.6. The pumps are particularly well suited to applications involving perchloroethylene (PCE). Built in handle for portability.
AMT Stainless Steel Transfer pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
979.30 |
|
|
AMT Pump 4294-030-00 Motor Adapter Xc1 To Mbv
|
72.93 |
|
|
AMT Pump 4294-010-00 Imp Xss 0.33Hp Mbv -01
|
74.04 |
|
|
Amt 2850-99 Cast Iron 1 1/4" Self Priming Pedestal Pump
AMT Self-Priming Centrifugal Pedestal pumps are designed for a wide range of industrial, agricultural and commercial applications. Dual volute design reduces radial load on bearings and motor. Heavy duty cast iron construction with Buna-N seals or stainless steel with Viton® seals. Pumps are fitted with a self-cleaning, semiopen impeller and are coupled to a heavy duty cast iron bearing housing with a CNC machined keyed shaft extension and sealed ball bearings. The pump has been designed for either direct connection or belt drive. The maximum recommended RPM is 4,000.
• Cast Iron & Stainless Steel Construction
• Buna-N Mechanical Seals on Cast Iron Models
• Viton® Mechanical Seals on Stainless Steel Models
• Optional Silicon Carbide Mechanical Seals Available
• 1-1/4˝, 1-1/2˝ or 2˝ NPT Suction and Discharge Port Sizes
• Dual Volute Design Reduces Radial Load on Motors
• Maximum Temperature
◆ Buna-N 180° F
◆ Viton® 200° F
• Self-Cleaning, Semi-Open Impeller
• Heavy Duty Cast Iron Pedestal Drive with Sealed Ball Bearings
|
41.92 |
|
|
AMT 3682-95 Straight Centrifugal Pedestal Pump
Mechanical Seal: Buna-N
Maximum Temperature: 180° F
3/4 in. NPT Suction Ports
1/2 in. NPT Discharge Ports
Maximum Working Pressure: 75 PSI
Self-cleaning Impeller on General Service Models
Maximum Flow 35 GPM
Maximum Head 148 Ft.
Epoxy Coated Pedestal Drive and Discharge Port Rotates in 90° Increments on High Head Models
All pumps have Cast Iron Casing with Stainless Steel Impeller
AMT Straight Centrifugal Pedestal pumps are designed for continuous-duty OEM, Industrial/Commercial and processing applications including circulation, chemical processing, liquid transfer, heating and cooling. The high head models are ideal for sprinkler systems and pressure boosting.
Pull-from-the-rear design permits easy servicing without disturbing any piping. Pedestals feature CNC machined shafts with sealed ball bearings. AMT Straight Centrifugal Pedestal pumps are reliable, cost effective and low maintenance. For use with nonflammable liquids compatible with pump component materials.
|
380.84 |
|
|
AMT 285P-95, Self-Priming Centrifugal Pump 3/4 HP, 3 PH, 230/460 V
Cast Iron Construction
Buna-N Mechanical Seal and O-Ring with optional Viton? or Silicon Carbide Mechanical Seal and O-ring
1" & 1-1/4" NPT Suction and Discharge Ports
Dual Volute Design Reduces Radial Load on Motor
Maximum Working Pressure 75 PSI
Maximum Temperature 180 F
Self-cleaning, Semi-open Impeller
|
595.69 |
|
|
AMT 4230-97, Coolant Recirculating Pump 1 Phase, 115V, 3/8" NPT Female
3/8" BRONZE COOLANT RECIRCULATING PUMPS
Cast Bronze Construction
No Bottom Bearing!!!
Brass Column and Impeller Shaft
Bronze Self-cleaning Open Impeller
3/8" NPT Discharge Port
Maximum Flow 8 GPM
Maximum Head 10 ft.
Available with 115V AC Single Phase or 230V AC Three Phase Motors,1590 RPM
1/25 HP Totally Enclosed Fan Cooled (TEFC) Motor
Delivers up to 8 GPM and 4 PSI
The AMT Bronze Coolant/Recirculating pump has been manufactured for a wide variety of Industrial/Commercial Coolant and Recirculating applications. The absence of a bottom bearing makes the unit ideal for handling erosive liquids. A 36" 3-conductor power cord is included.
AMT Bronze Coolant/Recirculating pumps are reliable, cost effective and low maintenance. Many are readily available “Off-the-Shelf” for fast, 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.
|
386.98 |
|
|
AMT Pump 5272-98 SS Rotary Drum Pump
Drum Pump, Stainless Steel, 1" NPT Suction x 3/4" NPT Discharge Port
Rotary drum pump for transfer of chemicals and liquids including many acids, acetones, trichloroethylene, solvents, photographic chemicals and ketones.
Hand-operated rotary lever action
304 stainless steel construction with carbon vanes and a Teflon (PTFE) seal for resistance to chemicals and corrosion
Flow rate of 12 oz. per stroke (5 gpm at 70 rpm)
1" female NPT inlet port and 3/4" female NPT outlet port
|
736.60 |
|
|
Amt 3893-98 1 1/2 In Ss Self Primer
|
1645.92 |
|
|
AMT Pump MSV3-5-1P Multistage Mtr/Pmp 1Hp 115v
Multi-Stage Booster Pump – MSV3-5-1P, 5-Stage, 115-208-230 Volts
NEMA 56C, Dual Cycle 50 and 60 Hz, 1.0 HP, single phase, Totally Enclosed, Fan Cooled motor
Recommended to operate at or below the Best Efficient Point which is at 16 GPM and a Max Total Head of 105 feet
Cast Iron base and adapter
1 inch NPT cast iron flanges
304 series stainless steel components with Teflon wear rings
EPDM-Tungsten Carbide Seal that is easy to remove and replace
The AMT MSV3-5-1P is a non-self-priming/gravity feed, industrial pump with high pressure and low output. This unit is more commonly referred to as a jockey pump and is often installed for water transfer uses where no suction lift is required such as boiler feed, condensate return, high pressure washdown, irrigation, booster service, and fire protection/sprinkler systems. These pumps have NOT been investigated for use in drinking water systems.
|
1465.20 |
|
|
Amt 5351-95, Cast Iron Coolant Pump 230/460volt
INTERCHANGEABLE IMMERSION & SUCTION COOLANT OIL PUMPS
1/4 HP Totally Enclosed Motor (TEFC)
Three Phase Motor
230/460 volts 0.8/0.4 amps
Stainless Steel or Composite Semi-open Impeller Options
Immersion and Suction Types
Cast Iron Construction
Handles Viscosity up to 500 SSU
Standard Replacement for Machine Tool Industry
Delivers up to 56 GPM and 26 PSI
3/4" FNPTOutlet
AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants.
AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.
|
507.94 |
|