AMT 285P-95, Self-Priming Centrifugal Pump 3/4 HP, 3 PH, 230/460 V Cast Iron Construction Buna-N Mechanical Seal and O-Ring with optional Viton? or Silicon Carbide Mechanical Seal and O-ring 1" & 1-1/4" NPT Suction and Discharge Ports Dual Volute Design Reduces Radial Load on Motor Maximum Working Pressure 75 PSI Maximum Temperature 180 F Self-cleaning, Semi-open Impeller

Amt Pump 3/4Hp 3Ph Sc Seals Self Priming Centrifugal Pump Model Number: 285P-95 Voltage: 230/460 Horsepower: 3/4 Gallons Per Hour: 4020 (67 GPM) 3/4HP 230/460v/3 TEFC

AMT 3201-96, Laundry Tray Pump 1/4 HP 115V GENERAL PURPOSE LAUNDRY TRAY PUMP   Cast Aluminum Construction Buna-N Mechanical Seal and O-Ring 1-1/4" NPT Suction and Discharge Port Self-cleaning, Semi-open Impeller Continuous Duty Motor 1725 RPM, 1/4 HP 115VAC Single Phase Open Drip Proof (ODP) 48Z Frame   The AMT Laundry Tray pump is a single stage, multi-vane open impeller unit. It is designed as a laundry tray pump but can be used for most gravity fed general service pumping applications. The open impeller design makes it particularly adaptable to dirty as well as clean liquids and is inherently resistant to clogging. The AMT Laundry Tray pump is readily available “Off-the-Shelf” for fast 24 hour shipment. For use with non-flammable liquids compatible with pump component materials.

Goulds Pump 2SN1FCE4 Centrifugal Pump 1.5Hp 3/60/230-460

AMT Pump HP02-99-09 Piston Drum Pump 3/4 Poly Model HP02-99 Features: Polypropylene Construction with Kynar Seals and Ryton® Piston Ring Delivers 13 oz. per Stroke Polypropylene Construction with Stainless Steel Components • Kynar Seals and Ryton® Piston Ring • Maximum Temperature 130° F • 13 oz. per Stroke • 3/4" NPT Discharge Port • 3/4" x 40" Polypropylene   Suction Tube Assembly • 2" Polypropylene Bung Adapter Polypropylene Drum pump is designed for transfer and dispensing of liquids within a pH range of 4 to 11. Liquid types include many organic acids, alcohols and water soluble inorganic chemicals, which are compatible with pump component materials.

BURKS 5G5-1 1/4, Centrifugal Pump 115/230v 1PH 1/2HP Bronze Fitted Cast Iron Construction. Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 3.63 Inches.   UNSPSC Code: 40150000

Flotec FP4222 Cast Iron Convertible Jet Pump 3/4 HP Cast iron convertible jet pumps can be used in shallow or deep well applications in " diameter wells or larger and are pre-set for 30-50 PSI operation. KEY FEATURES Superior performance at depths to water of 100' or less Rugged, heavy-duty pump housing Ready-to-install 230 volt motor - see manual for 115 volt conversion Pressure switch pre-wired with 30-50 PSI pressure setting WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Cast Iron HORSEPOWER:  3/4 MAXIMUM CAPACITY:  11.9 GPM (shallow setup) FLOW at 10' LIFT and 40 PSI:  10.8 GPM (shallow setup) MAX LIFT:  25' w/ shallow setup / 100' w/ deep well setup MAXIMUM PRESSURE:  60 psi w/ shallow setup / 54 psi w/ deep setup PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  6.1 amps on 230v / 12.2 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp for 230v / 20 amp for 115v MAXIMUM WATER TEMPERATURE:  140 F (60 C)

Flotec FP4822 Stainless Steel Shallow Well Jet Pump 3/4 HP Stainless steel shallow well jet pumps are heavy-duty, durable, corrosion resistant, high pressure and offer efficient non-stop operation for years. KEY FEATURES Superior performance at depths to water of 25' or less Heavy-duty, stainless steel pump housing for highest corrosion resistance Ready-to-install 230 volt motor - see manual for 115 volt conversion 1-1/4" NPT suction and 1" NPT discharge pipe sizes WARRANTY 1 year limited warranty  BODY CONSTRUCTION:  Stainless Steel HORSEPOWER:  3/4 MAXIMUM CAPACITY:  11 GPM FLOW at 10' LIFT and 40 PSI:  11 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  52 psi MAXIMUM INLET PRESSURE:   PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  NPT AMP DRAW (full load):  7.4 amps on 230v / 14.8 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v MAXIMUM WATER TEMPERATURE:  122°F (50 °C)

FINISH THOMPSON DB7V-T PUMP END, PVDF/TEFLON 56C Pulp & Paper Chemical Processing Heat Exchanger Circuit Board Printing     Magnetic Drive Pump, 3/4 HP,   Voltage 208-230/460,   Full Load Amps 2.4-2.3/1.15, 1-1/2 In.   FNPT Inlet, 1-1/2 In.   MNPT Outlet,   Motor Type Induction, Motor Enclosure TEFC,   69 GPM of Water @ 3 Ft. of Head,   69 GPM of Water @ 6 Ft. of Head,   69 GPM of Water @ 9 Ft. of Head,   64 GPM of Water @ 15 Ft. of Head,   58 GPM of Water @ 18 Ft. of Head,   50 GPM of Water @ 24 Ft. of Head,    Length 17-19/64 In., Width 7-1/2 In.  

MP Pump 35734 Self Priming Centrifugal Petroleum Pump Petroleum 15 Self Priming Centrifugal Pump, 3" x 3" Designed to Transfer Petrol Fluids: Diesel Fuel, Fuel Oil, Ethanol, E85, Biodiesel, Gasoline & Kerosene. PG15PMP D: PED CAR/SIC/VIT AWP 35658.

Flotec FP4022-10 Thermoplastic Shallow Well Jet Pump 3/4 HP This new revision of an "old hand" provides good pressure pumping from wells where the depth-to-water is 25' or less. KEY FEATURES Perfect for shallow wells (depth-to-water less than 25') Thermoplastic construction for higher corrosion resistance 1-1/4" Suction / 1" Discharge Comes with pre-wired 30/50 pressure switch WARRANTY 1 year limited warranty BODY CONSTRUCTION:  Thermoplastic HORSEPOWER:  3/4 MAXIMUM CAPACITY:  12 GPM FLOW at 10' LIFT and 40 PSI:  9.7 GPM MAX LIFT:  25' MAXIMUM PRESSURE:  78 psi PRESSURE SWITCH SETTING:  30/50 SUCTION PIPE SIZE:  1-1/4" NPT DISCHARGE PIPE SIZE:  1" NPT AMP DRAW (full load):  6.1 amps on 230v / 12.2 amps on 115v VOLTAGE:  230v / 115v, 60 Hz RECOMMENDED BREAKER:  15 amp on 230v / 20 amp on 115v   MAXIMUM WATER TEMPERATURE:  140 °F (60 °C)

March TE-7K-MD 3.5" 3PH 3Ph 3/4 Hp 3.5" Imp Pump

Hypro 9910-DBA160, 4 Diaphragm High Flow Pump Diaphragm Pump with 1-1/2" HB Inlet x 3/4" HB Outlet MaterialPolypropylene Pump Series9910-DBA160 Gasket MaterialDesmopan Inlet1-1/2" HB Outlet3/4" HB Maximum (RPM)550 Maximum Temperature (F°)140 Maximum Flow Rate (GPM)39.6 Maximum Pressure (PSI)725

AMT Pump 282L-95 3Ph 2Hp Open Drip-Proof 56J 230/460 AMT Pump 282L-95, 1-1/2" Cast Iron Self-Priming Centrifugal Pump Self-Priming Centrifugal Electric Driven Pump HP: 2HP Motor Frame Size: 56J Voltage: 230/460V Phase: 3 Shaft Seal Material: Buna-N / Stainless Steel

AMT 5391-95, Immersion Coolant Oil Pump 23gpm 230/460volt INTERCHANGEABLE IMMERSION & SUCTION COOLANT/OIL PUMPS   Cast Iron Construction 1/4 HP 230/460V 3 Phase Immersion Type Shaft Seal Material: Sealless Design Speed (RPM): 3450 Type: IMM Voltage: 230/460 Fluid Port: 0.5" HP:1/4 Impeller Material: Stainless Steel GPM: 23   Replacement for Standard Machine Tool Industry Pumps  Fuji: VKP-063A Old Fuji: VKN-061A Mitsubishi: NQ100J  Toshiba: OPF-100M Hitachi: CPD-100M Yasukawa: VFPC-100 Graymills: IMV-25   AMT Interchangeable Coolant/Oil pumps are dependable, economical replacement pumps equivalent to units supplied with both domestic and foreign made machine tools such as Fuji, Mitsubishi, Toshiba, Hitachi and many others. These pumps are designed for the circulation and spraying of coolants and cutting oils. Pumps feature semi-open impellers that are ideal for handling some solids and fine contaminants. AMT Interchangeable Coolant/Oil pumps are reliable, cost effective and low maintenance. For use with non-flammable liquids compatible with pump component materials.